diff mbox series

[3/5] media: qcom: camss: Add sc8280xp resources

Message ID 20240111-linux-next-24-01-09-sc8280xp-camss-changes-v1-3-b92a650121ba@linaro.org (mailing list archive)
State Superseded
Headers show
Series media: qcom: camss: Add sc8280xp support | expand

Commit Message

Bryan O'Donoghue Jan. 11, 2024, 7:57 p.m. UTC
This commit describes the hardware layout for the sc8280xp for the
following hardware blocks:

- 4 x VFE, 4 RDI per VFE
- 4 x VFE Lite, 4 RDI per VFE
- 4 x CSID
- 4 x CSID Lite
- 4 x CSI PHY

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

---
Depends on:
Link: https://lore.kernel.org/linux-arm-msm/20240111-linux-next-24-01-02-sc8280xp-camss-core-dtsi-v4-2-cdd5c57ff1dc@linaro.org
---
 drivers/media/platform/qcom/camss/camss.c | 307 ++++++++++++++++++++++++++++++
 1 file changed, 307 insertions(+)

Comments

Konrad Dybcio Jan. 16, 2024, 12:42 p.m. UTC | #1
On 1/11/24 20:57, Bryan O'Donoghue wrote:
> This commit describes the hardware layout for the sc8280xp for the
> following hardware blocks:
> 
> - 4 x VFE, 4 RDI per VFE
> - 4 x VFE Lite, 4 RDI per VFE
> - 4 x CSID
> - 4 x CSID Lite
> - 4 x CSI PHY
> 
> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> 
> ---

[...]

> +static const struct camss_subdev_resources csiphy_res_sc8280xp[] = {
> +	/* CSIPHY0 */

Are there any cases where a platform has PHYs with different
capabilities? Might be another nice thing to clean up in the
future..

[...]

> +
> +static const struct camss_subdev_resources vfe_res_sc8280xp[] = {
> +	/* IFE0 */
> +	{
> +		.regulators = {},
> +		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe0", "vfe0_axi" },

VFE->IFE?

> +		.clock_rate = { { 0 },
> +				{ 0 },
> +				{ 19200000, 80000000},

Missing space

Also, the source of this clock has shared_ops, which means it's
parked to XO on disable.. Is the first frequency here useful?

> +				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },

Similar story here

> +				{ 400000000, 558000000, 637000000, 760000000 },

And you (perhaps correctly) omitted 19.2MHz here

Same story for all other IFE/_LITEs in this patch

> +
> +static const struct resources_icc icc_res_sc8280xp[] = {
> +	{
> +		.name = "cam_ahb",
> +		.icc_bw_tbl.avg = 150000,
> +		.icc_bw_tbl.peak = 300000,
> +	},
> +	{
> +		.name = "cam_hf_mnoc",
> +		.icc_bw_tbl.avg = 2097152,
> +		.icc_bw_tbl.peak = 2097152,
> +	},
> +	{
> +		.name = "cam_sf_mnoc",
> +		.icc_bw_tbl.avg = 2097152,
> +		.icc_bw_tbl.peak = 2097152,
> +	},
> +	{
> +		.name = "cam_sf_icp_mnoc",
> +		.icc_bw_tbl.avg = 2097152,
> +		.icc_bw_tbl.peak = 2097152,

Mbps_to_icc()?


>   static const struct of_device_id camss_dt_match[] = {
>   	{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
>   	{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
>   	{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
>   	{ .compatible = "qcom,sdm845-camss", .data = &sdm845_resources },
>   	{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
> +	{ .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
"sc" < "sd"

Konrad
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 58f4be660290..916fe4a83aa9 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -941,6 +941,298 @@  static const struct resources_icc icc_res_sm8250[] = {
 	},
 };
 
+static const struct camss_subdev_resources csiphy_res_sc8280xp[] = {
+	/* CSIPHY0 */
+	{
+		.regulators = {},
+		.clock = { "csiphy0", "csiphy0_timer" },
+		.clock_rate = { { 400000000 },
+				{ 300000000 } },
+		.reg = { "csiphy0" },
+		.interrupt = { "csiphy0" },
+		.ops = &csiphy_ops_3ph_1_0
+	},
+	/* CSIPHY1 */
+	{
+		.regulators = {},
+		.clock = { "csiphy1", "csiphy1_timer" },
+		.clock_rate = { { 400000000 },
+				{ 300000000 } },
+		.reg = { "csiphy1" },
+		.interrupt = { "csiphy1" },
+		.ops = &csiphy_ops_3ph_1_0
+	},
+	/* CSIPHY2 */
+	{
+		.regulators = {},
+		.clock = { "csiphy2", "csiphy2_timer" },
+		.clock_rate = { { 400000000 },
+				{ 300000000 } },
+		.reg = { "csiphy2" },
+		.interrupt = { "csiphy2" },
+		.ops = &csiphy_ops_3ph_1_0
+	},
+	/* CSIPHY3 */
+	{
+		.regulators = {},
+		.clock = { "csiphy3", "csiphy3_timer" },
+		.clock_rate = { { 400000000 },
+				{ 300000000 } },
+		.reg = { "csiphy3" },
+		.interrupt = { "csiphy3" },
+		.ops = &csiphy_ops_3ph_1_0
+	},
+};
+
+static const struct camss_subdev_resources csid_res_sc8280xp[] = {
+	/* CSID0 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe0_csid", "vfe0_cphy_rx", "vfe0", "vfe0_axi" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid0" },
+		.interrupt = { "csid0" },
+		.ops = &csid_ops_gen2
+	},
+	/* CSID1 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe1_csid", "vfe1_cphy_rx", "vfe1", "vfe1_axi" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid1" },
+		.interrupt = { "csid1" },
+		.ops = &csid_ops_gen2
+	},
+	/* CSID2 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe2_csid", "vfe2_cphy_rx", "vfe2", "vfe2_axi" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid2" },
+		.interrupt = { "csid2" },
+		.ops = &csid_ops_gen2
+	},
+	/* CSID3 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe3_csid", "vfe3_cphy_rx", "vfe3", "vfe3_axi" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 },
+				{ 0 } },
+		.reg = { "csid3" },
+		.interrupt = { "csid3" },
+		.ops = &csid_ops_gen2
+	},
+	/* CSID_LITE0 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe_lite0_csid", "vfe_lite0_cphy_rx", "vfe_lite0" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 }, },
+		.reg = { "csid0_lite" },
+		.interrupt = { "csid0_lite" },
+		.is_lite = true,
+		.ops = &csid_ops_gen2
+	},
+	/* CSID_LITE1 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe_lite1_csid", "vfe_lite1_cphy_rx", "vfe_lite1" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 }, },
+		.reg = { "csid1_lite" },
+		.interrupt = { "csid1_lite" },
+		.is_lite = true,
+		.ops = &csid_ops_gen2
+	},
+	/* CSID_LITE2 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe_lite2_csid", "vfe_lite2_cphy_rx", "vfe_lite2" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 }, },
+		.reg = { "csid2_lite" },
+		.interrupt = { "csid2_lite" },
+		.is_lite = true,
+		.ops = &csid_ops_gen2
+	},
+	/* CSID_LITE3 */
+	{
+		.regulators = { "vdda-phy", "vdda-pll" },
+		.clock = { "vfe_lite3_csid", "vfe_lite3_cphy_rx", "vfe_lite3" },
+		.clock_rate = { { 400000000, 480000000, 600000000 },
+				{ 0 },
+				{ 0 }, },
+		.reg = { "csid3_lite" },
+		.interrupt = { "csid3_lite" },
+		.is_lite = true,
+		.ops = &csid_ops_gen2
+	}
+};
+
+static const struct camss_subdev_resources vfe_res_sc8280xp[] = {
+	/* IFE0 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe0", "vfe0_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 400000000, 558000000, 637000000, 760000000 },
+				{ 0 }, },
+		.reg = { "vfe0" },
+		.interrupt = { "vfe0" },
+		.pd_name = "ife0",
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE1 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe1", "vfe1_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 400000000, 558000000, 637000000, 760000000 },
+				{ 0 }, },
+		.reg = { "vfe1" },
+		.interrupt = { "vfe1" },
+		.pd_name = "ife1",
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE2 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe2", "vfe2_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 400000000, 558000000, 637000000, 760000000 },
+				{ 0 }, },
+		.reg = { "vfe2" },
+		.interrupt = { "vfe2" },
+		.pd_name = "ife2",
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* VFE3 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe3", "vfe3_axi" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 400000000, 558000000, 637000000, 760000000 },
+				{ 0 }, },
+		.reg = { "vfe3" },
+		.interrupt = { "vfe3" },
+		.pd_name = "ife3",
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE_LITE_0 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite0" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 320000000, 400000000, 480000000, 600000000 }, },
+		.reg = { "vfe_lite0" },
+		.interrupt = { "vfe_lite0" },
+		.is_lite = true,
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE_LITE_1 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite1" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 320000000, 400000000, 480000000, 600000000 }, },
+		.reg = { "vfe_lite1" },
+		.interrupt = { "vfe_lite1" },
+		.is_lite = true,
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* IFE_LITE_2 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite2" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 320000000, 400000000, 480000000, 600000000, }, },
+		.reg = { "vfe_lite2" },
+		.interrupt = { "vfe_lite2" },
+		.is_lite = true,
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+	/* VFE_LITE_3 */
+	{
+		.regulators = {},
+		.clock = { "gcc_axi_hf", "gcc_axi_sf", "cpas_ahb", "camnoc_axi", "vfe_lite3" },
+		.clock_rate = { { 0 },
+				{ 0 },
+				{ 19200000, 80000000},
+				{ 19200000, 150000000, 266666667, 320000000, 400000000, 480000000 },
+				{ 320000000, 400000000, 480000000, 600000000 }, },
+		.reg = { "vfe_lite3" },
+		.interrupt = { "vfe_lite3" },
+		.is_lite = true,
+		.line_num = 4,
+		.ops = &vfe_ops_170
+	},
+};
+
+static const struct resources_icc icc_res_sc8280xp[] = {
+	{
+		.name = "cam_ahb",
+		.icc_bw_tbl.avg = 150000,
+		.icc_bw_tbl.peak = 300000,
+	},
+	{
+		.name = "cam_hf_mnoc",
+		.icc_bw_tbl.avg = 2097152,
+		.icc_bw_tbl.peak = 2097152,
+	},
+	{
+		.name = "cam_sf_mnoc",
+		.icc_bw_tbl.avg = 2097152,
+		.icc_bw_tbl.peak = 2097152,
+	},
+	{
+		.name = "cam_sf_icp_mnoc",
+		.icc_bw_tbl.avg = 2097152,
+		.icc_bw_tbl.peak = 2097152,
+	},
+};
+
 /*
  * camss_add_clock_margin - Add margin to clock frequency rate
  * @rate: Clock frequency rate
@@ -1826,12 +2118,27 @@  static const struct camss_resources sm8250_resources = {
 	.vfe_num = ARRAY_SIZE(vfe_res_8250),
 };
 
+static const struct camss_resources sc8280xp_resources = {
+	.version = CAMSS_8280XP,
+	.pd_name = "top",
+	.csiphy_res = csiphy_res_sc8280xp,
+	.csid_res = csid_res_sc8280xp,
+	.ispif_res = NULL,
+	.vfe_res = vfe_res_sc8280xp,
+	.icc_res = icc_res_sc8280xp,
+	.icc_path_num = ARRAY_SIZE(icc_res_sc8280xp),
+	.csiphy_num = ARRAY_SIZE(csiphy_res_sc8280xp),
+	.csid_num = ARRAY_SIZE(csid_res_sc8280xp),
+	.vfe_num = ARRAY_SIZE(vfe_res_sc8280xp),
+};
+
 static const struct of_device_id camss_dt_match[] = {
 	{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
 	{ .compatible = "qcom,msm8996-camss", .data = &msm8996_resources },
 	{ .compatible = "qcom,sdm660-camss", .data = &sdm660_resources },
 	{ .compatible = "qcom,sdm845-camss", .data = &sdm845_resources },
 	{ .compatible = "qcom,sm8250-camss", .data = &sm8250_resources },
+	{ .compatible = "qcom,sc8280xp-camss", .data = &sc8280xp_resources },
 	{ }
 };