diff mbox series

[v2,09/15] usb: typec: qcom-pmic-typec: add support for PMI632 PMIC

Message ID 20240113-pmi632-typec-v2-9-182d9aa0a5b3@linaro.org (mailing list archive)
State Superseded
Headers show
Series usb: typec: qcom-pmic-typec: enable support for PMI632 PMIC | expand

Commit Message

Dmitry Baryshkov Jan. 13, 2024, 8:55 p.m. UTC
The PMI632 PMIC support Type-C port handling, but lacks USB
PowerDelivery support. The TCPM requires all callbacks to be provided
by the implementation. Implement a special, 'stub' Qcom PD PHY
implementation to enable the PMI632 support.

Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/usb/typec/tcpm/qcom/Makefile               |  3 +-
 drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c      | 30 ++++++--
 .../usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h    |  2 +
 .../typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c   | 80 ++++++++++++++++++++++
 4 files changed, 107 insertions(+), 8 deletions(-)

Comments

Konrad Dybcio Jan. 16, 2024, 12:32 p.m. UTC | #1
On 1/13/24 21:55, Dmitry Baryshkov wrote:
> The PMI632 PMIC support Type-C port handling, but lacks USB
> PowerDelivery support. The TCPM requires all callbacks to be provided
> by the implementation. Implement a special, 'stub' Qcom PD PHY
> implementation to enable the PMI632 support.
> 
> Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---

Still not a fan of stubby stubs :/

Konrad
Dmitry Baryshkov Jan. 16, 2024, 12:56 p.m. UTC | #2
On Tue, 16 Jan 2024 at 14:32, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
>
>
>
> On 1/13/24 21:55, Dmitry Baryshkov wrote:
> > The PMI632 PMIC support Type-C port handling, but lacks USB
> > PowerDelivery support. The TCPM requires all callbacks to be provided
> > by the implementation. Implement a special, 'stub' Qcom PD PHY
> > implementation to enable the PMI632 support.
> >
> > Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > ---
>
> Still not a fan of stubby stubs :/

Me too. If there are better suggestions, I'll be pleased to implement
them. Greg, Heikki?
Heikki Krogerus Jan. 16, 2024, 2:23 p.m. UTC | #3
On Tue, Jan 16, 2024 at 02:56:11PM +0200, Dmitry Baryshkov wrote:
> On Tue, 16 Jan 2024 at 14:32, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
> > On 1/13/24 21:55, Dmitry Baryshkov wrote:
> > > The PMI632 PMIC support Type-C port handling, but lacks USB
> > > PowerDelivery support. The TCPM requires all callbacks to be provided
> > > by the implementation. Implement a special, 'stub' Qcom PD PHY
> > > implementation to enable the PMI632 support.
> > >
> > > Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > > ---
> >
> > Still not a fan of stubby stubs :/
> 
> Me too. If there are better suggestions, I'll be pleased to implement
> them. Greg, Heikki?

Guenter, do you have time to look at this?

thanks,
Dmitry Baryshkov Jan. 25, 2024, 12:07 a.m. UTC | #4
On Tue, 16 Jan 2024 at 16:23, Heikki Krogerus
<heikki.krogerus@linux.intel.com> wrote:
>
> On Tue, Jan 16, 2024 at 02:56:11PM +0200, Dmitry Baryshkov wrote:
> > On Tue, 16 Jan 2024 at 14:32, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
> > > On 1/13/24 21:55, Dmitry Baryshkov wrote:
> > > > The PMI632 PMIC support Type-C port handling, but lacks USB
> > > > PowerDelivery support. The TCPM requires all callbacks to be provided
> > > > by the implementation. Implement a special, 'stub' Qcom PD PHY
> > > > implementation to enable the PMI632 support.
> > > >
> > > > Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > > > ---
> > >
> > > Still not a fan of stubby stubs :/
> >
> > Me too. If there are better suggestions, I'll be pleased to implement
> > them. Greg, Heikki?
>
> Guenter, do you have time to look at this?

Heikki, Guenter, just a gracious ping for your opinion.
Probably another option is to read pd_supported (or all caps) before
checking the callbacks and then instrument all calls to PD with
pd_supported checks.
Heikki Krogerus Jan. 25, 2024, 11:03 a.m. UTC | #5
On Thu, Jan 25, 2024 at 02:07:59AM +0200, Dmitry Baryshkov wrote:
> On Tue, 16 Jan 2024 at 16:23, Heikki Krogerus
> <heikki.krogerus@linux.intel.com> wrote:
> >
> > On Tue, Jan 16, 2024 at 02:56:11PM +0200, Dmitry Baryshkov wrote:
> > > On Tue, 16 Jan 2024 at 14:32, Konrad Dybcio <konrad.dybcio@linaro.org> wrote:
> > > > On 1/13/24 21:55, Dmitry Baryshkov wrote:
> > > > > The PMI632 PMIC support Type-C port handling, but lacks USB
> > > > > PowerDelivery support. The TCPM requires all callbacks to be provided
> > > > > by the implementation. Implement a special, 'stub' Qcom PD PHY
> > > > > implementation to enable the PMI632 support.
> > > > >
> > > > > Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
> > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > > > > ---
> > > >
> > > > Still not a fan of stubby stubs :/
> > >
> > > Me too. If there are better suggestions, I'll be pleased to implement
> > > them. Greg, Heikki?
> >
> > Guenter, do you have time to look at this?
> 
> Heikki, Guenter, just a gracious ping for your opinion.
> Probably another option is to read pd_supported (or all caps) before
> checking the callbacks and then instrument all calls to PD with
> pd_supported checks.

I don't have anything to suggest here, but Guenter should really
comment this one. In any case, FWIW:

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
diff mbox series

Patch

diff --git a/drivers/usb/typec/tcpm/qcom/Makefile b/drivers/usb/typec/tcpm/qcom/Makefile
index dc1e8832e197..cc23042b9487 100644
--- a/drivers/usb/typec/tcpm/qcom/Makefile
+++ b/drivers/usb/typec/tcpm/qcom/Makefile
@@ -3,4 +3,5 @@ 
 obj-$(CONFIG_TYPEC_QCOM_PMIC)		+= qcom_pmic_tcpm.o
 qcom_pmic_tcpm-y			+= qcom_pmic_typec.o \
 					   qcom_pmic_typec_port.o \
-					   qcom_pmic_typec_pdphy.o
+					   qcom_pmic_typec_pdphy.o \
+					   qcom_pmic_typec_pdphy_stub.o \
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
index 82e3f59ea471..e48412cdcb0f 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec.c
@@ -42,7 +42,7 @@  static int qcom_pmic_typec_probe(struct platform_device *pdev)
 	const struct pmic_typec_resources *res;
 	struct regmap *regmap;
 	struct device *bridge_dev;
-	u32 base[2];
+	u32 base;
 	int ret;
 
 	res = of_device_get_match_data(dev);
@@ -62,19 +62,29 @@  static int qcom_pmic_typec_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	ret = of_property_read_u32_array(np, "reg", base, 2);
+	ret = of_property_read_u32_index(np, "reg", 0, &base);
 	if (ret)
 		return ret;
 
 	ret = qcom_pmic_typec_port_probe(pdev, tcpm,
-					 res->port_res, regmap, base[0]);
+					 res->port_res, regmap, base);
 	if (ret)
 		return ret;
 
-	ret = qcom_pmic_typec_pdphy_probe(pdev, tcpm,
-					  res->pdphy_res, regmap, base[1]);
-	if (ret)
-		return ret;
+	if (res->pdphy_res) {
+		ret = of_property_read_u32_index(np, "reg", 1, &base);
+		if (ret)
+			return ret;
+
+		ret = qcom_pmic_typec_pdphy_probe(pdev, tcpm,
+						  res->pdphy_res, regmap, base);
+		if (ret)
+			return ret;
+	} else {
+		ret = qcom_pmic_typec_pdphy_stub_probe(pdev, tcpm);
+		if (ret)
+			return ret;
+	}
 
 	platform_set_drvdata(pdev, tcpm);
 
@@ -123,8 +133,14 @@  static const struct pmic_typec_resources pm8150b_typec_res = {
 	.port_res = &pm8150b_port_res,
 };
 
+static const struct pmic_typec_resources pmi632_typec_res = {
+	/* PD PHY not present */
+	.port_res = &pm8150b_port_res,
+};
+
 static const struct of_device_id qcom_pmic_typec_table[] = {
 	{ .compatible = "qcom,pm8150b-typec", .data = &pm8150b_typec_res },
+	{ .compatible = "qcom,pmi632-typec", .data = &pmi632_typec_res },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, qcom_pmic_typec_table);
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h
index 5f428e67ccfe..04dee20293cf 100644
--- a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy.h
@@ -31,5 +31,7 @@  int qcom_pmic_typec_pdphy_probe(struct platform_device *pdev,
 				const struct pmic_typec_pdphy_resources *res,
 				struct regmap *regmap,
 				u32 base);
+int qcom_pmic_typec_pdphy_stub_probe(struct platform_device *pdev,
+				     struct pmic_typec *tcpm);
 
 #endif /* __QCOM_PMIC_TYPEC_PDPHY_H__ */
diff --git a/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c
new file mode 100644
index 000000000000..df79059cda67
--- /dev/null
+++ b/drivers/usb/typec/tcpm/qcom/qcom_pmic_typec_pdphy_stub.c
@@ -0,0 +1,80 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2024, Linaro Ltd. All rights reserved.
+ */
+
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/usb/pd.h>
+#include <linux/usb/tcpm.h>
+#include "qcom_pmic_typec.h"
+#include "qcom_pmic_typec_pdphy.h"
+
+static int qcom_pmic_typec_pdphy_stub_pd_transmit(struct tcpc_dev *tcpc,
+						  enum tcpm_transmit_type type,
+						  const struct pd_message *msg,
+						  unsigned int negotiated_rev)
+{
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct device *dev = tcpm->dev;
+
+	dev_dbg(dev, "pdphy_transmit: type=%d\n", type);
+
+	tcpm_pd_transmit_complete(tcpm->tcpm_port,
+				  TCPC_TX_SUCCESS);
+
+	return 0;
+}
+
+static int qcom_pmic_typec_pdphy_stub_set_pd_rx(struct tcpc_dev *tcpc, bool on)
+{
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct device *dev = tcpm->dev;
+
+	dev_dbg(dev, "set_pd_rx: %s\n", on ? "on" : "off");
+
+	return 0;
+}
+
+static int qcom_pmic_typec_pdphy_stub_set_roles(struct tcpc_dev *tcpc, bool attached,
+						enum typec_role power_role,
+						enum typec_data_role data_role)
+{
+	struct pmic_typec *tcpm = tcpc_to_tcpm(tcpc);
+	struct device *dev = tcpm->dev;
+
+	dev_dbg(dev, "pdphy_set_roles: data_role_host=%d power_role_src=%d\n",
+		data_role, power_role);
+
+	return 0;
+}
+
+static int qcom_pmic_typec_pdphy_stub_start(struct pmic_typec *tcpm,
+					    struct tcpm_port *tcpm_port)
+{
+	return 0;
+}
+
+static void qcom_pmic_typec_pdphy_stub_stop(struct pmic_typec *tcpm)
+{
+}
+
+int qcom_pmic_typec_pdphy_stub_probe(struct platform_device *pdev,
+				     struct pmic_typec *tcpm)
+{
+	tcpm->tcpc.set_pd_rx = qcom_pmic_typec_pdphy_stub_set_pd_rx;
+	tcpm->tcpc.set_roles = qcom_pmic_typec_pdphy_stub_set_roles;
+	tcpm->tcpc.pd_transmit = qcom_pmic_typec_pdphy_stub_pd_transmit;
+
+	tcpm->pdphy_start = qcom_pmic_typec_pdphy_stub_start;
+	tcpm->pdphy_stop = qcom_pmic_typec_pdphy_stub_stop;
+
+	return 0;
+}