diff mbox series

arm64: dts: qcom: sm8450: Add missing interconnects to serial

Message ID 20240116-topic-8450serial-v1-1-b685e6a5ad78@linaro.org (mailing list archive)
State Accepted
Commit 6e115b75b43bd12d4061e53c8ff175e387783d8a
Headers show
Series arm64: dts: qcom: sm8450: Add missing interconnects to serial | expand

Commit Message

Konrad Dybcio Jan. 16, 2024, 12:25 p.m. UTC
The serial ports did not have their interconnect paths specified when
they were first introduced. Fix that.

Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8450.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)


---
base-commit: 8d04a7e2ee3fd6aabb8096b00c64db0d735bc874
change-id: 20240116-topic-8450serial-402fcb5e211b

Best regards,

Comments

Krzysztof Kozlowski Jan. 16, 2024, 12:53 p.m. UTC | #1
On 16/01/2024 13:25, Konrad Dybcio wrote:
> The serial ports did not have their interconnect paths specified when
> they were first introduced. Fix that.
> 
> Fixes: 5188049c9b36 ("arm64: dts: qcom: Add base SM8450 DTSI")
> Fixes: f5837418479a ("arm64: dts: qcom: sm8450: add uart20 node")
> Reported-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Suggested-by: Georgi Djakov <djakov@kernel.org>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
Bjorn Andersson Jan. 28, 2024, 2:17 a.m. UTC | #2
On Tue, 16 Jan 2024 13:25:44 +0100, Konrad Dybcio wrote:
> The serial ports did not have their interconnect paths specified when
> they were first introduced. Fix that.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: sm8450: Add missing interconnects to serial
      commit: 6e115b75b43bd12d4061e53c8ff175e387783d8a

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 01e4dfc4babd..06f183ef8c78 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1028,6 +1028,12 @@  uart20: serial@894000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart20_default>;
 				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 
@@ -1420,6 +1426,12 @@  uart7: serial@99c000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_tx>, <&qup_uart7_rx>;
 				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
+						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
+						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+						 &config_noc SLAVE_QUP_2 QCOM_ICC_TAG_ALWAYS>;
+				interconnect-names = "qup-core",
+						     "qup-config";
 				status = "disabled";
 			};
 		};