[v6] arm64: dts: qcom: qcm6490-idp: Add definition for three LEDs

Commit Message

Hui Liu via B4 Relay Jan. 22, 2024, 6:43 a.m. UTC

From: Hui Liu <[e-mail]>

Add definition for three LEDs to make sure they can
be enabled base on QCOM LPG LED driver.

Signed-off-by: Hui Liu <[e-mail]>
---
Changes in v6:
- Updated the seperate LEDs nodes to multi-led setting.
- Link to v5: https://lore.kernel.org/r/[e-mail]

Changes in v5:
- Rephrased commit text, replaced qcs6490-idp to qcm6490-idp.
- Removed the unnecessary full.
- Link to v4: https://lore.kernel.org/r/[e-mail]

Changes in v4:
- Removed "label" definition and added "function" definition.
- Link to v3: https://lore.kernel.org/r/[e-mail]

Changes in v3:
- Rephrased commit text and updated the nodes to qcm6490-idp board file.
- Link to v2: https://lore.kernel.org/all/[e-mail]/

Changes in v2:
- Rephrased commit text and updated the nodes to board file.
- Link to v1: https://lore.kernel.org/r/[e-mail]
---
 arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)


---
base-commit: 17cb8a20bde66a520a2ca7aad1063e1ce7382240
change-id: 20231215-lpg-4aadd374811a

Best regards,

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index 37c91fdf3ab9..c9e7ddcbd259 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -5,6 +5,7 @@ 
 
 /dts-v1/;
 
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include "sc7280.dtsi"
 #include "pm7325.dtsi"
@@ -414,6 +415,33 @@  vreg_bob_3p296: bob {
 	};
 };
 
+&pm8350c_pwm {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_RED>;
+		};
+
+		led@2 {
+			reg = <2>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };