diff mbox series

[v5,07/11] arm64: dts: qcom: x1e80100: Add PCIe nodes

Message ID 20240126-x1e80100-dts-missing-nodes-v5-7-3bb716fb2af9@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: Add more support to X1E80100 base dtsi, CRD and QCP boards | expand

Commit Message

Abel Vesa Jan. 26, 2024, 10 a.m. UTC
Add nodes for PCIe 4 and 6 controllers and their PHYs for X1E80100 platform.

Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Co-developed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100.dtsi | 214 ++++++++++++++++++++++++++++++++-
 1 file changed, 212 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index ddf2e6e44e7e..b06577b66a86 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -732,9 +732,9 @@  gcc: clock-controller@100000 {
 			clocks = <&bi_tcxo_div2>,
 				 <&sleep_clk>,
 				 <0>,
+				 <&pcie4_phy>,
 				 <0>,
-				 <0>,
-				 <0>,
+				 <&pcie6a_phy>,
 				 <0>,
 				 <&usb_1_ss0_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
 				 <&usb_1_ss1_qmpphy QMP_USB43DP_USB3_PIPE_CLK>,
@@ -2722,6 +2722,216 @@  mmss_noc: interconnect@1780000 {
 			#interconnect-cells = <2>;
 		};
 
+		pcie6a: pci@1bf8000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0 0x01bf8000 0 0x3000>,
+			      <0 0x70000000 0 0xf1d>,
+			      <0 0x70000f20 0 0xa8>,
+			      <0 0x70001000 0 0x1000>,
+			      <0 0x70100000 0 0x100000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x70200000 0 0x100000>,
+				 <0x02000000 0 0x70300000 0 0x70300000 0 0x3d00000>;
+			bus-range = <0 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <7>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_6A_AUX_CLK>,
+				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_6A_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_6A_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_6A_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SOUTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_6A_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_south_anoc MASTER_PCIE_6A QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_6A QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_6A_BCR>,
+				 <&gcc GCC_PCIE_6A_LINK_DOWN_BCR>;
+			reset-names = "pci",
+				      "link_down";
+
+			power-domains = <&gcc GCC_PCIE_6A_GDSC>;
+
+			phys = <&pcie6a_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie6a_phy: phy@1bfc000 {
+			compatible = "qcom,x1e80100-qmp-gen4x2-pcie-phy";
+			reg = <0 0x01bfc000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_6A_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_6A_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_6A_PHY_BCR>,
+				 <&gcc GCC_PCIE_6A_NOCSR_COM_PHY_BCR>;
+			reset-names = "phy",
+				      "phy_nocsr";
+
+			assigned-clocks = <&gcc GCC_PCIE_6A_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_6_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie6a_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		pcie4: pci@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-x1e80100";
+			reg = <0 0x01c08000 0 0x3000>,
+			      <0 0x7c000000 0 0xf1d>,
+			      <0 0x7c000f40 0 0xa8>,
+			      <0 0x7c001000 0 0x1000>,
+			      <0 0x7c100000 0 0x100000>,
+			      <0 0x01c0b000 0 0x1000>;
+			reg-names = "parf",
+			            "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0 0x00000000 0 0x7c200000 0 0x100000>,
+				 <0x02000000 0 0x7c300000 0 0x7c300000 0 0x3d00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <5>;
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "noc_aggr_south_sf";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&pcie_south_anoc MASTER_PCIE_4 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_4 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			resets = <&gcc GCC_PCIE_4_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_4_GDSC>;
+
+			phys = <&pcie4_phy>;
+			phy-names = "pciephy";
+
+			status = "disabled";
+		};
+
+		pcie4_phy: phy@1c0e000 {
+			compatible = "qcom,x1e80100-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c0e000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_4_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_4_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE_4_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			power-domains = <&gcc GCC_PCIE_4_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie4_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;