diff mbox series

[v2,4/4] arm64: dts: qcom: qrb2210-rb1: enable USB-C port handling

Message ID 20240202-pm4125-typec-v2-4-12771d85700d@linaro.org (mailing list archive)
State Superseded
Headers show
Series arm64: dts: qcom: qrb2210-rb1: enable Type-C support | expand

Commit Message

Dmitry Baryshkov Feb. 1, 2024, 11:55 p.m. UTC 
Plug in USB-C related bits and pieces to enable USB role switching and
USB-C orientation handling for the Qualcomm RB1 board.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/qcm2290.dtsi    | 42 ++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/qrb2210-rb1.dts | 60 +++++++++++++++++++++++++++-----
 2 files changed, 94 insertions(+), 8 deletions(-)

Comments

Bryan O'Donoghue Feb. 2, 2024, 3:45 p.m. UTC | #1 
On 02/02/2024 00:55, Dmitry Baryshkov wrote:
> Plug in USB-C related bits and pieces to enable USB role switching and
> USB-C orientation handling for the Qualcomm RB1 board.
> 
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index 0911fb08ed63..6e9a92556423 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -689,8 +689,29 @@  usb_qmpphy: phy@1615000 {
 			clock-output-names = "usb3_phy_pipe_clk_src";
 
 			#phy-cells = <0>;
+			orientation-switch;
 
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_dwc3_ss>;
+					};
+				};
+			};
 		};
 
 		system_noc: interconnect@1880000 {
@@ -1373,6 +1394,27 @@  usb_dwc3: usb@4e00000 {
 				snps,usb3_lpm_capable;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
+				usb-role-switch;
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index 64b2ab286279..00fcc01326ff 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -244,6 +244,46 @@  &pm4125_resin {
 	status = "okay";
 };
 
+&pm4125_typec {
+	status = "okay";
+
+	connector {
+		compatible = "usb-c-connector";
+
+		power-role = "dual";
+		data-role = "dual";
+		self-powered;
+
+		typec-power-opmode = "default";
+		pd-disable;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				pm4125_hs_in: endpoint {
+					remote-endpoint = <&usb_dwc3_hs>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				pm4125_ss_in: endpoint {
+					remote-endpoint = <&usb_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&pm4125_vbus {
+	regulator-min-microamp = <500000>;
+	regulator-max-microamp = <500000>;
+	status = "okay";
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
@@ -517,14 +557,8 @@  &usb {
 	status = "okay";
 };
 
-&usb_qmpphy {
-	vdda-phy-supply = <&pm4125_l12>;
-	vdda-pll-supply = <&pm4125_l13>;
-	status = "okay";
-};
-
-&usb_dwc3 {
-	dr_mode = "host";
+&usb_dwc3_hs {
+	remote-endpoint = <&pm4125_hs_in>;
 };
 
 &usb_hsphy {
@@ -534,6 +568,16 @@  &usb_hsphy {
 	status = "okay";
 };
 
+&usb_qmpphy {
+	vdda-phy-supply = <&pm4125_l12>;
+	vdda-pll-supply = <&pm4125_l13>;
+	status = "okay";
+};
+
+&usb_qmpphy_out {
+	remote-endpoint = <&pm4125_ss_in>;
+};
+
 &wifi {
 	vdd-0.8-cx-mx-supply = <&pm4125_l7>;
 	vdd-1.8-xo-supply = <&pm4125_l13>;