diff mbox series

[v14,04/53] xhci: Add helper to set an interrupters interrupt moderation interval

Message ID 20240208231406.27397-5-quic_wcheng@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Introduce QC USB SND audio offloading support | expand

Commit Message

Wesley Cheng Feb. 8, 2024, 11:13 p.m. UTC
From: Mathias Nyman <mathias.nyman@linux.intel.com>

Add a helper to set the interrupt moderation interval for an interrupter.
Each interrupter can have its own moderation value.

Hardware has a 16bit register for the moderation value, each step is 250ns.

Helper function imod_interval argument is in nanoseconds.

Values from 0 to 16383750 (250 x 0xffff) are accepted.
0 means no interrupt throttling.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 drivers/usb/host/xhci.c | 25 ++++++++++++++++++-------
 1 file changed, 18 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 0886829d53e5..b405b8236134 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -346,6 +346,23 @@  static int xhci_disable_interrupter(struct xhci_interrupter *ir)
 	return 0;
 }
 
+/* interrupt moderation interval imod_interval in nanoseconds */
+static int xhci_set_interrupter_moderation(struct xhci_interrupter *ir,
+					   u32 imod_interval)
+{
+	u32 imod;
+
+	if (!ir || !ir->ir_set || imod_interval > U16_MAX * 250)
+		return -EINVAL;
+
+	imod = readl(&ir->ir_set->irq_control);
+	imod &= ~ER_IRQ_INTERVAL_MASK;
+	imod |= (imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
+	writel(imod, &ir->ir_set->irq_control);
+
+	return 0;
+}
+
 static void compliance_mode_recovery(struct timer_list *t)
 {
 	struct xhci_hcd *xhci;
@@ -528,7 +545,6 @@  static int xhci_run_finished(struct xhci_hcd *xhci)
  */
 int xhci_run(struct usb_hcd *hcd)
 {
-	u32 temp;
 	u64 temp_64;
 	int ret;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -551,12 +567,7 @@  int xhci_run(struct usb_hcd *hcd)
 	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
 			"ERST deq = 64'h%0lx", (long unsigned int) temp_64);
 
-	xhci_dbg_trace(xhci, trace_xhci_dbg_init,
-			"// Set the interrupt modulation register");
-	temp = readl(&ir->ir_set->irq_control);
-	temp &= ~ER_IRQ_INTERVAL_MASK;
-	temp |= (xhci->imod_interval / 250) & ER_IRQ_INTERVAL_MASK;
-	writel(temp, &ir->ir_set->irq_control);
+	xhci_set_interrupter_moderation(ir, xhci->imod_interval);
 
 	if (xhci->quirks & XHCI_NEC_HOST) {
 		struct xhci_command *command;