| Message ID | 20240221-pcie-qcom-bridge-dts-v1-7-6c6df0f9450d@linaro.org (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add PCIe bridge node in DT for Qcom SoCs | expand |
On 21/02/2024 04:41, Manivannan Sadhasivam wrote: > On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge > for each controller instance. Hence, add a node to represent the bridge. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8650.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi > index 2df77123a8c7..57a1ea84aa59 100644 > --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi > @@ -2270,6 +2270,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > dma-coherent; > > status = "disabled"; > + > + pcie@0 { > + device_type = "pci"; > + reg = <0x0 0x0 0x0 0x0 0x0>; > + bus-range = <0x01 0xff>; > + > + #address-cells = <3>; > + #size-cells = <2>; > + ranges; > + }; > }; > > pcie0_phy: phy@1c06000 { > @@ -2379,6 +2389,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, > <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>; > > status = "disabled"; > + > + pcie@0 { > + device_type = "pci"; > + reg = <0x0 0x0 0x0 0x0 0x0>; > + bus-range = <0x01 0xff>; > + > + #address-cells = <3>; > + #size-cells = <2>; > + ranges; > + }; > }; > > pcie1_phy: phy@1c0e000 { > Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 2df77123a8c7..57a1ea84aa59 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -2270,6 +2270,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, dma-coherent; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie0_phy: phy@1c06000 { @@ -2379,6 +2389,16 @@ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>, <0x02000000 0 0x40300000 0 0x40300000 0 0x1fd00000>; status = "disabled"; + + pcie@0 { + device_type = "pci"; + reg = <0x0 0x0 0x0 0x0 0x0>; + bus-range = <0x01 0xff>; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; }; pcie1_phy: phy@1c0e000 {
On Qcom SoCs, the PCIe host bridge is connected to a single PCIe bridge for each controller instance. Hence, add a node to represent the bridge. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> --- arch/arm64/boot/dts/qcom/sm8650.dtsi | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+)