diff mbox series

[RFC,3/3] drm/msm/dp: Add support for the X1E80100

Message ID 20240221-x1e80100-display-refactor-connector-v1-3-86c0e1ebd5ec@linaro.org (mailing list archive)
State Superseded
Headers show
Series drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100 | expand

Commit Message

Abel Vesa Feb. 20, 2024, 10:50 p.m. UTC
Add the X1E80100 DP descs and compatible. This platform will be using
a single compatible for both eDP and DP mode. The actual mode will
be set in devicetree via is-edp flag.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++
 1 file changed, 9 insertions(+)

Comments

Dmitry Baryshkov Feb. 20, 2024, 11:02 p.m. UTC | #1
On Wed, 21 Feb 2024 at 00:50, Abel Vesa <abel.vesa@linaro.org> wrote:
>
> Add the X1E80100 DP descs and compatible. This platform will be using
> a single compatible for both eDP and DP mode. The actual mode will
> be set in devicetree via is-edp flag.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++
>  1 file changed, 9 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Bjorn Andersson Feb. 22, 2024, 3:40 a.m. UTC | #2
On Wed, Feb 21, 2024 at 12:50:33AM +0200, Abel Vesa wrote:
> Add the X1E80100 DP descs and compatible. This platform will be using
> a single compatible for both eDP and DP mode. The actual mode will
> be set in devicetree via is-edp flag.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  drivers/gpu/drm/msm/dp/dp_display.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index 9e58285d4ec6..7b8c695d521a 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -171,6 +171,14 @@ static const struct msm_dp_desc sm8650_dp_descs[] = {
>  	{}
>  };
>  
> +static const struct msm_dp_desc x1e80100_dp_descs[] = {
> +	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .wide_bus_en = true },
> +	{ .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .wide_bus_en = true },
> +	{ .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_en = true },
> +	{ .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_en = true },
> +	{}
> +};
> +
>  static const struct of_device_id dp_dt_match[] = {
>  	{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
>  	{ .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
> @@ -179,6 +187,7 @@ static const struct of_device_id dp_dt_match[] = {
>  	{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
>  	{ .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
>  	{ .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
> +	{ .compatible = "qcom,x1e80100-dp", .data = &x1e80100_dp_descs },

This doesn't look like alphabetical order.

Regards,
Bjorn

>  	{ .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
>  	{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
>  	{ .compatible = "qcom,sm8650-dp", .data = &sm8650_dp_descs },
> 
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 9e58285d4ec6..7b8c695d521a 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -171,6 +171,14 @@  static const struct msm_dp_desc sm8650_dp_descs[] = {
 	{}
 };
 
+static const struct msm_dp_desc x1e80100_dp_descs[] = {
+	{ .io_start = 0x0ae90000, .id = MSM_DP_CONTROLLER_0, .wide_bus_en = true },
+	{ .io_start = 0x0ae98000, .id = MSM_DP_CONTROLLER_1, .wide_bus_en = true },
+	{ .io_start = 0x0ae9a000, .id = MSM_DP_CONTROLLER_2, .wide_bus_en = true },
+	{ .io_start = 0x0aea0000, .id = MSM_DP_CONTROLLER_3, .wide_bus_en = true },
+	{}
+};
+
 static const struct of_device_id dp_dt_match[] = {
 	{ .compatible = "qcom,sc7180-dp", .data = &sc7180_dp_descs },
 	{ .compatible = "qcom,sc7280-dp", .data = &sc7280_dp_descs },
@@ -179,6 +187,7 @@  static const struct of_device_id dp_dt_match[] = {
 	{ .compatible = "qcom,sc8180x-edp", .data = &sc8180x_dp_descs },
 	{ .compatible = "qcom,sc8280xp-dp", .data = &sc8280xp_dp_descs },
 	{ .compatible = "qcom,sc8280xp-edp", .data = &sc8280xp_edp_descs },
+	{ .compatible = "qcom,x1e80100-dp", .data = &x1e80100_dp_descs },
 	{ .compatible = "qcom,sdm845-dp", .data = &sc7180_dp_descs },
 	{ .compatible = "qcom,sm8350-dp", .data = &sm8350_dp_descs },
 	{ .compatible = "qcom,sm8650-dp", .data = &sm8650_dp_descs },