diff mbox series

phy: qcom: qmp-combo: fix sm8650 voltage swing table

Message ID 20240226-topic-sm8650-upstream-combo-phy-swing-update-v1-1-08707ebca92a@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series phy: qcom: qmp-combo: fix sm8650 voltage swing table | expand

Commit Message

Neil Armstrong Feb. 26, 2024, 3:22 p.m. UTC
The QMP USB3/DP PHY found in the SM8650 SoC requires a slighly
different Voltage Swing table for HBR/RBR link speeds.

Add a new hbr/rbr voltage switch table named "v6" used in a new
sm8650 qmp_phy_cfg struct replacing the sm8550 fallback used for
the sm8650 compatible.

Fixes: 80c1afe8c5fe ("phy: qcom: qmp-combo: add QMP USB3/DP PHY tables for SM8650")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 54 ++++++++++++++++++++++++++++++-
 1 file changed, 53 insertions(+), 1 deletion(-)


---
base-commit: 8552c902efe7ef670b6961fb8885b67961aeb629
change-id: 20240226-topic-sm8650-upstream-combo-phy-swing-update-41ba728470dc

Best regards,

Comments

Vinod Koul April 5, 2024, 5:09 p.m. UTC | #1
On Mon, 26 Feb 2024 16:22:36 +0100, Neil Armstrong wrote:
> The QMP USB3/DP PHY found in the SM8650 SoC requires a slighly
> different Voltage Swing table for HBR/RBR link speeds.
> 
> Add a new hbr/rbr voltage switch table named "v6" used in a new
> sm8650 qmp_phy_cfg struct replacing the sm8550 fallback used for
> the sm8650 compatible.
> 
> [...]

Applied, thanks!

[1/1] phy: qcom: qmp-combo: fix sm8650 voltage swing table
      commit: f320268fcebcbab02631d2070fa19ad4856a5a5e

Best regards,
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 546d3c6bee32..66991886da87 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -1377,6 +1377,13 @@  static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
 	{ 0x3f, 0xff, 0xff, 0xff }
 };
 
+static const u8 qmp_dp_v6_voltage_swing_hbr_rbr[4][4] = {
+	{ 0x27, 0x2f, 0x36, 0x3f },
+	{ 0x31, 0x3e, 0x3f, 0xff },
+	{ 0x36, 0x3f, 0xff, 0xff },
+	{ 0x3f, 0xff, 0xff, 0xff }
+};
+
 static const u8 qmp_dp_v6_pre_emphasis_hbr_rbr[4][4] = {
 	{ 0x20, 0x2d, 0x34, 0x3a },
 	{ 0x20, 0x2e, 0x35, 0xff },
@@ -1996,6 +2003,51 @@  static const struct qmp_phy_cfg sm8550_usb3dpphy_cfg = {
 	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
 };
 
+static const struct qmp_phy_cfg sm8650_usb3dpphy_cfg = {
+	.offsets		= &qmp_combo_offsets_v3,
+
+	.serdes_tbl		= sm8550_usb3_serdes_tbl,
+	.serdes_tbl_num		= ARRAY_SIZE(sm8550_usb3_serdes_tbl),
+	.tx_tbl			= sm8550_usb3_tx_tbl,
+	.tx_tbl_num		= ARRAY_SIZE(sm8550_usb3_tx_tbl),
+	.rx_tbl			= sm8550_usb3_rx_tbl,
+	.rx_tbl_num		= ARRAY_SIZE(sm8550_usb3_rx_tbl),
+	.pcs_tbl		= sm8550_usb3_pcs_tbl,
+	.pcs_tbl_num		= ARRAY_SIZE(sm8550_usb3_pcs_tbl),
+	.pcs_usb_tbl		= sm8550_usb3_pcs_usb_tbl,
+	.pcs_usb_tbl_num	= ARRAY_SIZE(sm8550_usb3_pcs_usb_tbl),
+
+	.dp_serdes_tbl		= qmp_v6_dp_serdes_tbl,
+	.dp_serdes_tbl_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl),
+	.dp_tx_tbl		= qmp_v6_dp_tx_tbl,
+	.dp_tx_tbl_num		= ARRAY_SIZE(qmp_v6_dp_tx_tbl),
+
+	.serdes_tbl_rbr		= qmp_v6_dp_serdes_tbl_rbr,
+	.serdes_tbl_rbr_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_rbr),
+	.serdes_tbl_hbr		= qmp_v6_dp_serdes_tbl_hbr,
+	.serdes_tbl_hbr_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr),
+	.serdes_tbl_hbr2	= qmp_v6_dp_serdes_tbl_hbr2,
+	.serdes_tbl_hbr2_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr2),
+	.serdes_tbl_hbr3	= qmp_v6_dp_serdes_tbl_hbr3,
+	.serdes_tbl_hbr3_num	= ARRAY_SIZE(qmp_v6_dp_serdes_tbl_hbr3),
+
+	.swing_hbr_rbr		= &qmp_dp_v6_voltage_swing_hbr_rbr,
+	.pre_emphasis_hbr_rbr	= &qmp_dp_v6_pre_emphasis_hbr_rbr,
+	.swing_hbr3_hbr2	= &qmp_dp_v5_voltage_swing_hbr3_hbr2,
+	.pre_emphasis_hbr3_hbr2 = &qmp_dp_v5_pre_emphasis_hbr3_hbr2,
+
+	.dp_aux_init		= qmp_v4_dp_aux_init,
+	.configure_dp_tx	= qmp_v4_configure_dp_tx,
+	.configure_dp_phy	= qmp_v4_configure_dp_phy,
+	.calibrate_dp_phy	= qmp_v4_calibrate_dp_phy,
+
+	.regs			= qmp_v6_usb3phy_regs_layout,
+	.reset_list		= msm8996_usb3phy_reset_l,
+	.num_resets		= ARRAY_SIZE(msm8996_usb3phy_reset_l),
+	.vreg_list		= qmp_phy_vreg_l,
+	.num_vregs		= ARRAY_SIZE(qmp_phy_vreg_l),
+};
+
 static int qmp_combo_dp_serdes_init(struct qmp_combo *qmp)
 {
 	const struct qmp_phy_cfg *cfg = qmp->cfg;
@@ -3625,7 +3677,7 @@  static const struct of_device_id qmp_combo_of_match_table[] = {
 	},
 	{
 		.compatible = "qcom,sm8650-qmp-usb3-dp-phy",
-		.data = &sm8550_usb3dpphy_cfg,
+		.data = &sm8650_usb3dpphy_cfg,
 	},
 	{
 		.compatible = "qcom,x1e80100-qmp-usb3-dp-phy",