diff mbox series

[v4,1/2] dt-bindings: PCI: qcom: Document the X1E80100 PCIe Controller

Message ID 20240301-x1e80100-pci-v4-1-7ab7e281d647@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series PCI: qcom: Add PCIe support for X1E80100 | expand

Commit Message

Abel Vesa March 1, 2024, 4:59 p.m. UTC
Add dedicated schema for the PCIe controllers found on X1E80100.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 .../bindings/pci/qcom,pcie-x1e80100.yaml           | 165 +++++++++++++++++++++
 1 file changed, 165 insertions(+)

Comments

Rob Herring March 1, 2024, 6:30 p.m. UTC | #1
On Fri, 01 Mar 2024 18:59:01 +0200, Abel Vesa wrote:
> Add dedicated schema for the PCIe controllers found on X1E80100.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  .../bindings/pci/qcom,pcie-x1e80100.yaml           | 165 +++++++++++++++++++++
>  1 file changed, 165 insertions(+)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml:
Error in referenced schema matching $id: http://devicetree.org/schemas/pci/qcom,pcie-common.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.example.dtb: pcie@1c08000: False schema does not allow {'compatible': ['qcom,pcie-x1e80100'], 'reg': [[0, 29392896, 0, 12288], [0, 2080374784, 0, 3869], [0, 2080378688, 0, 168], [0, 2080378880, 0, 4096], [0, 2081423360, 0, 1048576], [0, 29405184, 0, 4096]], 'reg-names': ['parf', 'dbi', 'elbi', 'atu', 'config', 'mhi'], 'ranges': [[16777216, 0, 0, 0, 1612709888, 0, 1048576], [33554432, 0, 1613758464, 0, 1613758464, 0, 63963136]], 'bus-range': [[0, 255]], 'device_type': ['pci'], 'linux,pci-domain': [[0]], 'num-lanes': [[2]], '#address-cells': [[3]], '#size-cells': [[2]], 'clocks': [[4294967295, 96], [4294967295, 98], [4294967295, 99], [4294967295, 105], [4294967295, 106], [4294967295, 21], [4294967295, 33]], 'clock-names': ['aux', 'cfg', 'bus_master', 'bus_slave', 'slave_q2a', 'noc_aggr', 'cnoc_sf_axi'], 'dma-coherent': True, 'interrupts': [[0, 141, 4], [0, 142, 4], [0, 143, 4], [0, 144, 4], [0, 145, 4], [0, 146, 4], [0, 147, 4], [0, 148, 4]], 'interrupt-names': ['msi0', 'msi1', 'msi2', 'msi3', 'msi4', 'msi5', 'msi6', 'msi7'], '#interrupt-cells': [[1]], 'interrupt-map-mask': [[0, 0, 0, 7]], 'interrupt-map': [[0, 0, 0, 1, 4294967295, 0, 0, 0, 149, 4], [0, 0, 0, 2, 4294967295, 0, 0, 0, 150, 4], [0, 0, 0, 3, 4294967295, 0, 0, 0, 151, 4], [0, 0, 0, 4, 4294967295, 0, 0, 0, 152, 4]], 'interconnects': [[4294967295, 1, 0, 4294967295, 1, 0], [4294967295, 3, 0, 4294967295, 12, 0]], 'interconnect-names': ['pcie-mem', 'cpu-pcie'], 'iommu-map': [[0, 4294967295, 5120, 1], [256, 4294967295, 5121, 1]], 'phys': [[4294967295]], 'phy-names': ['pciephy'], 'pinctrl-0': [[4294967295]], 'pinctrl-names': ['default'], 'power-domains': [[4294967295, 5]], 'resets': [[4294967295, 24]], 'reset-names': ['pci'], 'perst-gpios': [[4294967295, 94, 1]], 'wake-gpios': [[4294967295, 96, 0]], '$nodename': ['pcie@1c08000']}
	from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.example.dtb: pcie@1c08000: Unevaluated properties are not allowed ('#address-cells', '#interrupt-cells', '#size-cells', 'bus-range', 'device_type', 'dma-coherent', 'interconnect-names', 'interconnects', 'interrupt-map', 'interrupt-map-mask', 'iommu-map', 'linux,pci-domain', 'num-lanes', 'perst-gpios', 'phy-names', 'phys', 'power-domains', 'ranges', 'wake-gpios' were unexpected)
	from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240301-x1e80100-pci-v4-1-7ab7e281d647@linaro.org

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Krzysztof Kozlowski March 2, 2024, 4:23 p.m. UTC | #2
On 01/03/2024 17:59, Abel Vesa wrote:
> Add dedicated schema for the PCIe controllers found on X1E80100.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  .../bindings/pci/qcom,pcie-x1e80100.yaml           | 165 +++++++++++++++++++++
>  1 file changed, 165 insertions(+)

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Failure reported by Rob's robot is coming from dependency in PCI tree.

Best regards,
Krzysztof
Manivannan Sadhasivam March 4, 2024, 5:49 a.m. UTC | #3
On Fri, Mar 01, 2024 at 06:59:01PM +0200, Abel Vesa wrote:
> Add dedicated schema for the PCIe controllers found on X1E80100.
> 
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>

Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  .../bindings/pci/qcom,pcie-x1e80100.yaml           | 165 +++++++++++++++++++++
>  1 file changed, 165 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> new file mode 100644
> index 000000000000..1074310a8e7a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
> @@ -0,0 +1,165 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm X1E80100 PCI Express Root Complex
> +
> +maintainers:
> +  - Bjorn Andersson <andersson@kernel.org>
> +  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> +
> +description:
> +  Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on
> +  the Synopsys DesignWare PCIe IP.
> +
> +properties:
> +  compatible:
> +    const: qcom,pcie-x1e80100
> +
> +  reg:
> +    minItems: 5
> +    maxItems: 6
> +
> +  reg-names:
> +    minItems: 5
> +    items:
> +      - const: parf # Qualcomm specific registers
> +      - const: dbi # DesignWare PCIe registers
> +      - const: elbi # External local bus interface registers
> +      - const: atu # ATU address space
> +      - const: config # PCIe configuration space
> +      - const: mhi # MHI registers
> +
> +  clocks:
> +    minItems: 7
> +    maxItems: 7
> +
> +  clock-names:
> +    items:
> +      - const: aux # Auxiliary clock
> +      - const: cfg # Configuration clock
> +      - const: bus_master # Master AXI clock
> +      - const: bus_slave # Slave AXI clock
> +      - const: slave_q2a # Slave Q2A clock
> +      - const: noc_aggr # Aggre NoC PCIe AXI clock
> +      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
> +
> +  interrupts:
> +    minItems: 8
> +    maxItems: 8
> +
> +  interrupt-names:
> +    items:
> +      - const: msi0
> +      - const: msi1
> +      - const: msi2
> +      - const: msi3
> +      - const: msi4
> +      - const: msi5
> +      - const: msi6
> +      - const: msi7
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 2
> +
> +  reset-names:
> +    minItems: 1
> +    items:
> +      - const: pci # PCIe core reset
> +      - const: link_down # PCIe link down reset
> +
> +allOf:
> +  - $ref: qcom,pcie-common.yaml#
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie@1c08000 {
> +            compatible = "qcom,pcie-x1e80100";
> +            reg = <0 0x01c08000 0 0x3000>,
> +                  <0 0x7c000000 0 0xf1d>,
> +                  <0 0x7c000f40 0 0xa8>,
> +                  <0 0x7c001000 0 0x1000>,
> +                  <0 0x7c100000 0 0x100000>,
> +                  <0 0x01c0b000 0 0x1000>;
> +            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
> +            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
> +                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
> +
> +            bus-range = <0x00 0xff>;
> +            device_type = "pci";
> +            linux,pci-domain = <0>;
> +            num-lanes = <2>;
> +
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +
> +            clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
> +                     <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
> +                     <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
> +                     <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
> +                     <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
> +                     <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
> +                     <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
> +            clock-names = "aux",
> +                          "cfg",
> +                          "bus_master",
> +                          "bus_slave",
> +                          "slave_q2a",
> +                          "noc_aggr",
> +                          "cnoc_sf_axi";
> +
> +            dma-coherent;
> +
> +            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
> +                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +            interrupt-names = "msi0", "msi1", "msi2", "msi3",
> +                              "msi4", "msi5", "msi6", "msi7";
> +            #interrupt-cells = <1>;
> +            interrupt-map-mask = <0 0 0 0x7>;
> +            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
> +                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
> +                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
> +                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
> +
> +            interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
> +                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
> +            interconnect-names = "pcie-mem", "cpu-pcie";
> +
> +            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
> +                        <0x100 &apps_smmu 0x1401 0x1>;
> +
> +            phys = <&pcie4_phy>;
> +            phy-names = "pciephy";
> +
> +            pinctrl-0 = <&pcie0_default_state>;
> +            pinctrl-names = "default";
> +
> +            power-domains = <&gcc GCC_PCIE_4_GDSC>;
> +
> +            resets = <&gcc GCC_PCIE_4_BCR>;
> +            reset-names = "pci";
> +
> +            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
> +            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
> +        };
> +    };
> 
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
new file mode 100644
index 000000000000..1074310a8e7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
@@ -0,0 +1,165 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm X1E80100 PCI Express Root Complex
+
+maintainers:
+  - Bjorn Andersson <andersson@kernel.org>
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm X1E80100 SoC (and compatible) PCIe root complex controller is based on
+  the Synopsys DesignWare PCIe IP.
+
+properties:
+  compatible:
+    const: qcom,pcie-x1e80100
+
+  reg:
+    minItems: 5
+    maxItems: 6
+
+  reg-names:
+    minItems: 5
+    items:
+      - const: parf # Qualcomm specific registers
+      - const: dbi # DesignWare PCIe registers
+      - const: elbi # External local bus interface registers
+      - const: atu # ATU address space
+      - const: config # PCIe configuration space
+      - const: mhi # MHI registers
+
+  clocks:
+    minItems: 7
+    maxItems: 7
+
+  clock-names:
+    items:
+      - const: aux # Auxiliary clock
+      - const: cfg # Configuration clock
+      - const: bus_master # Master AXI clock
+      - const: bus_slave # Slave AXI clock
+      - const: slave_q2a # Slave Q2A clock
+      - const: noc_aggr # Aggre NoC PCIe AXI clock
+      - const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
+
+  interrupts:
+    minItems: 8
+    maxItems: 8
+
+  interrupt-names:
+    items:
+      - const: msi0
+      - const: msi1
+      - const: msi2
+      - const: msi3
+      - const: msi4
+      - const: msi5
+      - const: msi6
+      - const: msi7
+
+  resets:
+    minItems: 1
+    maxItems: 2
+
+  reset-names:
+    minItems: 1
+    items:
+      - const: pci # PCIe core reset
+      - const: link_down # PCIe link down reset
+
+allOf:
+  - $ref: qcom,pcie-common.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interconnect/qcom,x1e80100-rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie@1c08000 {
+            compatible = "qcom,pcie-x1e80100";
+            reg = <0 0x01c08000 0 0x3000>,
+                  <0 0x7c000000 0 0xf1d>,
+                  <0 0x7c000f40 0 0xa8>,
+                  <0 0x7c001000 0 0x1000>,
+                  <0 0x7c100000 0 0x100000>,
+                  <0 0x01c0b000 0 0x1000>;
+            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+            bus-range = <0x00 0xff>;
+            device_type = "pci";
+            linux,pci-domain = <0>;
+            num-lanes = <2>;
+
+            #address-cells = <3>;
+            #size-cells = <2>;
+
+            clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
+                     <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
+                     <&gcc GCC_PCIE_4_MSTR_AXI_CLK>,
+                     <&gcc GCC_PCIE_4_SLV_AXI_CLK>,
+                     <&gcc GCC_PCIE_4_SLV_Q2A_AXI_CLK>,
+                     <&gcc GCC_CFG_NOC_PCIE_ANOC_NORTH_AHB_CLK>,
+                     <&gcc GCC_CNOC_PCIE_NORTH_SF_AXI_CLK>;
+            clock-names = "aux",
+                          "cfg",
+                          "bus_master",
+                          "bus_slave",
+                          "slave_q2a",
+                          "noc_aggr",
+                          "cnoc_sf_axi";
+
+            dma-coherent;
+
+            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "msi0", "msi1", "msi2", "msi3",
+                              "msi4", "msi5", "msi6", "msi7";
+            #interrupt-cells = <1>;
+            interrupt-map-mask = <0 0 0 0x7>;
+            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+
+            interconnects = <&pcie_noc MASTER_PCIE_4 0 &mc_virt SLAVE_EBI1 0>,
+                            <&gem_noc MASTER_APPSS_PROC 0 &cnoc_main SLAVE_PCIE_4 0>;
+            interconnect-names = "pcie-mem", "cpu-pcie";
+
+            iommu-map = <0x0 &apps_smmu 0x1400 0x1>,
+                        <0x100 &apps_smmu 0x1401 0x1>;
+
+            phys = <&pcie4_phy>;
+            phy-names = "pciephy";
+
+            pinctrl-0 = <&pcie0_default_state>;
+            pinctrl-names = "default";
+
+            power-domains = <&gcc GCC_PCIE_4_GDSC>;
+
+            resets = <&gcc GCC_PCIE_4_BCR>;
+            reset-names = "pci";
+
+            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
+            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
+        };
+    };