@@ -39,6 +39,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-msm8960-cdp.dtb \
qcom-msm8960-samsung-expressatt.dtb \
qcom-msm8974-lge-nexus5-hammerhead.dtb \
+ qcom-msm8974-samsung-hlte.dtb \
qcom-msm8974-sony-xperia-rhine-amami.dtb \
qcom-msm8974-sony-xperia-rhine-honami.dtb \
qcom-msm8974pro-fairphone-fp2.dtb \
new file mode 100644
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0
+#include "qcom-msm8974.dtsi"
+#include "pm8841.dtsi"
+#include "pm8941.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+
+/ {
+ model = "Samsung Galaxy Note 3";
+ compatible = "samsung,hlte", "qcom,msm8974";
+ chassis-type = "handset";
+
+ aliases {
+ mmc0 = &sdhc_1; /* SDC1 eMMC slot */
+ mmc1 = &sdhc_3; /* SDC3 SD card slot */
+ serial0 = &blsp1_uart1;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys_pin_a>;
+
+ key-home {
+ label = "home_key";
+ gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ key-volume-down {
+ label = "volume_down";
+ gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ debounce-interval = <15>;
+ };
+
+ key-volume-up {
+ label = "volume_up";
+ gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ debounce-interval = <15>;
+ };
+ };
+
+ touch_ldo: regulator-touch {
+ compatible = "regulator-fixed";
+ regulator-name = "touch-ldo";
+
+ gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-boot-on;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_ldo_pin>;
+ };
+};
+
+&blsp1_i2c2 {
+ status = "okay";
+
+ touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+
+ interrupt-parent = <&pm8941_gpios>;
+ interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+
+ vdd-supply = <&pm8941_l10>;
+ vio-supply = <&touch_ldo>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pin>;
+
+ syna,startup-delay-ms = <100>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
+
+&blsp2_i2c6 {
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max17048";
+ reg = <0x36>;
+
+ maxim,double-soc;
+ maxim,rcomp = /bits/ 8 <0x56>;
+
+ interrupt-parent = <&pm8941_gpios>;
+ interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&fuelgauge_pin>;
+ };
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&pm8941_gpios {
+ gpio_keys_pin_a: gpio-keys-active-state {
+ pins = "gpio2", "gpio3", "gpio5";
+ function = "normal";
+ bias-pull-up;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ fuelgauge_pin: fuelgauge-int-state {
+ pins = "gpio26";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ touch_pin: touchscreen-int-state {
+ pins = "gpio30";
+ function = "normal";
+ bias-disable;
+ input-enable;
+ power-source = <PM8941_GPIO_S3>;
+ };
+
+ touch_ldo_pin: touchscreen-ldo-state {
+ pins = "gpio9";
+ function = "normal";
+ output-high;
+ power-source = <PM8941_GPIO_S3>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
+ };
+};
+
+&remoteproc_adsp {
+ cx-supply = <&pm8841_s2>;
+ status = "okay";
+};
+
+&remoteproc_mss {
+ cx-supply = <&pm8841_s2>;
+ mss-supply = <&pm8841_s3>;
+ mx-supply = <&pm8841_s1>;
+ pll-supply = <&pm8941_l12>;
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm8841-regulators";
+
+ pm8841_s1: s1 {
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s2: s2 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s3: s3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8841_s4: s4 {
+ regulator-min-microvolt = <815000>;
+ regulator-max-microvolt = <900000>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,rpm-pm8941-regulators";
+
+ pm8941_s1: s1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ pm8941_s2: s2 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pm8941_s3: s3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l1: l1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l2: l2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8941_l3: l3 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8941_l5: l5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l7: l7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8941_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l11: l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1350000>;
+ };
+
+ pm8941_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8941_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8941_l14: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8941_l15: l15 {
+ regulator-min-microvolt = <2050000>;
+ regulator-max-microvolt = <2050000>;
+ };
+
+ pm8941_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8941_l17: l17 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l18: l18 {
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ pm8941_l19: l19 {
+ regulator-min-microvolt = <2900000>;
+ regulator-max-microvolt = <3350000>;
+ };
+
+ pm8941_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ pm8941_l21: l21 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ pm8941_l22: l22 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8941_l23: l23 {
+ regulator-min-microvolt = <2400000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ pm8941_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+ };
+};
+
+&sdhc_1 {
+ vmmc-supply = <&pm8941_l20>;
+ vqmmc-supply = <&pm8941_s3>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc1_pin_a>;
+
+ status = "okay";
+};
+
+&sdhc_3 {
+ max-frequency = <100000000>;
+
+ vmmc-supply = <&pm8941_l21>;
+ vqmmc-supply = <&pm8941_l21>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdhc3_pin_a>;
+
+ status = "okay";
+};
+
+&tlmm {
+ sdhc1_pin_a: sdhc1-pin-active-state {
+ clk-pins {
+ pins = "sdc1_clk";
+ drive-strength = <4>;
+ bias-disable;
+ };
+
+ cmd-data-pins {
+ pins = "sdc1_cmd", "sdc1_data";
+ drive-strength = <4>;
+ bias-pull-up;
+ };
+ };
+
+ sdhc3_pin_a: sdhc3-pin-active-state {
+ pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40";
+ function = "sdc3";
+ drive-strength = <8>;
+ bias-disable;
+ };
+};
+
+&usb {
+ phys = <&usb_hs1_phy>;
+ phy-select = <&tcsr 0xb000 0>;
+
+ hnp-disable;
+ srp-disable;
+ adp-disable;
+
+ status = "okay";
+};
+
+&usb_hs1_phy {
+ v1p8-supply = <&pm8941_l6>;
+ v3p3-supply = <&pm8941_l24>;
+
+ qcom,init-seq = /bits/ 8 <0x1 0x64>;
+
+ status = "okay";
+};