| Message ID | 20240310-shinano-common-v1-3-d64cd322ebca@z3ntu.xyz (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Split sony-castor into shinano-common and add Sony Xperia Z3 | expand |
On Sonntag, 10. März 2024 12:41:09 CET Luca Weiss wrote: > Add the dts for the Xperia Z3 smartphone which is based on Sony's > shinano platform, so at the moment there's little device-specific dts to > add on top of the common parts. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- > .../qcom-msm8974pro-sony-xperia-shinano-leo.dts | 44 +++++++++++++++++++ +++ > 1 file changed, 44 insertions(+) Of course I forgot to add the dtb to the Makefile... Apparently "make qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dtb" doesn't care about whether the dtb is in the Makefile so I didn't notice. Will fix in v2 but I'm going to wait for any comments on this or the other patches for at least a day or so. Regards Luca > > diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano- leo.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts > new file mode 100644 > index 000000000000..1ed6e1cc21d5 > --- /dev/null > +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts > @@ -0,0 +1,44 @@ > +// SPDX-License-Identifier: GPL-2.0 > +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi" > + > +/ { > + model = "Sony Xperia Z3"; > + compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974"; > + chassis-type = "handset"; > + > + gpio-keys { > + key-camera-snapshot { > + label = "camera_snapshot"; > + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_CAMERA>; > + debounce-interval = <15>; > + }; > + > + key-camera-focus { > + label = "camera_focus"; > + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; > + linux,code = <KEY_CAMERA_FOCUS>; > + debounce-interval = <15>; > + }; > + }; > +}; > + > +&gpio_keys_pin_a { > + pins = "gpio2", "gpio3", "gpio4", "gpio5"; > +}; > + > +&smbb { > + usb-charge-current-limit = <1500000>; > + qcom,fast-charge-safe-current = <3000000>; > + qcom,fast-charge-current-limit = <2150000>; > + qcom,fast-charge-safe-voltage = <4400000>; > + qcom,fast-charge-high-threshold-voltage = <4350000>; > + qcom,auto-recharge-threshold-voltage = <4280000>; > + qcom,minimum-input-voltage = <4200000>; > + > + status = "okay"; > +}; > + > +&synaptics_touchscreen { > + vio-supply = <&pm8941_s3>; > +}; > >
On 3/10/24 12:41, Luca Weiss wrote: > Add the dts for the Xperia Z3 smartphone which is based on Sony's > shinano platform, so at the moment there's little device-specific dts to > add on top of the common parts. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- modulo missing makfile, this looks good
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts new file mode 100644 index 000000000000..1ed6e1cc21d5 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi" + +/ { + model = "Sony Xperia Z3"; + compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + gpio-keys { + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; +}; + +&gpio_keys_pin_a { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <3000000>; + qcom,fast-charge-current-limit = <2150000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4280000>; + qcom,minimum-input-voltage = <4200000>; + + status = "okay"; +}; + +&synaptics_touchscreen { + vio-supply = <&pm8941_s3>; +};
Add the dts for the Xperia Z3 smartphone which is based on Sony's shinano platform, so at the moment there's little device-specific dts to add on top of the common parts. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- .../qcom-msm8974pro-sony-xperia-shinano-leo.dts | 44 ++++++++++++++++++++++ 1 file changed, 44 insertions(+)