diff mbox series

[2/3] arm64: dts: qcom: qdu1000-idp: enable USB nodes

Message ID 20240311120859.18489-3-quic_kbajaj@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add devicetree support of USB for QDU/QRU1000 | expand

Commit Message

Komal Bajaj March 11, 2024, 12:08 p.m. UTC
Enable both USB controllers and associated hsphy and qmp phy nodes
on QDU1000 IDP.

Co-developed-by: Amrit Anand <quic_amrianan@quicinc.com>
Signed-off-by: Amrit Anand <quic_amrianan@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

--
2.42.0

Comments

Dmitry Baryshkov March 11, 2024, 12:14 p.m. UTC | #1
On Mon, 11 Mar 2024 at 14:10, Komal Bajaj <quic_kbajaj@quicinc.com> wrote:
>
> Enable both USB controllers and associated hsphy and qmp phy nodes
> on QDU1000 IDP.
>
> Co-developed-by: Amrit Anand <quic_amrianan@quicinc.com>
> Signed-off-by: Amrit Anand <quic_amrianan@quicinc.com>
> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> index 89b84fb0f70a..126bc71afd90 100644
> --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
> @@ -500,3 +500,27 @@ &tlmm {
>  &uart7 {
>         status = "okay";
>  };
> +
> +&usb_1 {
> +       status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +       dr_mode = "peripheral";

Are these ports really peripheral-only?

> +       maximum-speed = "high-speed";
> +};
> +
> +&usb_1_hsphy {
> +       vdda-pll-supply = <&vreg_l8a_0p91>;
> +       vdda18-supply = <&vreg_l14a_1p8>;
> +       vdda33-supply = <&vreg_l2a_2p3>;
> +
> +       status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> +       vdda-phy-supply = <&vreg_l8a_0p91>;
> +       vdda-pll-supply = <&vreg_l3a_1p2>;
> +
> +       status = "okay";
> +};
> --
> 2.42.0
>
>
Konrad Dybcio March 12, 2024, 12:04 a.m. UTC | #2
On 3/11/24 13:14, Dmitry Baryshkov wrote:
> On Mon, 11 Mar 2024 at 14:10, Komal Bajaj <quic_kbajaj@quicinc.com> wrote:
>>
>> Enable both USB controllers and associated hsphy and qmp phy nodes
>> on QDU1000 IDP.
>>
>> Co-developed-by: Amrit Anand <quic_amrianan@quicinc.com>
>> Signed-off-by: Amrit Anand <quic_amrianan@quicinc.com>
>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 24 ++++++++++++++++++++++++
>>   1 file changed, 24 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> index 89b84fb0f70a..126bc71afd90 100644
>> --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>> @@ -500,3 +500,27 @@ &tlmm {
>>   &uart7 {
>>          status = "okay";
>>   };
>> +
>> +&usb_1 {
>> +       status = "okay";
>> +};
>> +
>> +&usb_1_dwc3 {
>> +       dr_mode = "peripheral";
> 
> Are these ports really peripheral-only?
> 
>> +       maximum-speed = "high-speed";

More importantly, are these ports really HS-only?

Konrad
Komal Bajaj March 19, 2024, 8:34 a.m. UTC | #3
On 3/12/2024 5:34 AM, Konrad Dybcio wrote:
> 
> 
> On 3/11/24 13:14, Dmitry Baryshkov wrote:
>> On Mon, 11 Mar 2024 at 14:10, Komal Bajaj <quic_kbajaj@quicinc.com> 
>> wrote:
>>>
>>> Enable both USB controllers and associated hsphy and qmp phy nodes
>>> on QDU1000 IDP.
>>>
>>> Co-developed-by: Amrit Anand <quic_amrianan@quicinc.com>
>>> Signed-off-by: Amrit Anand <quic_amrianan@quicinc.com>
>>> Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
>>> ---
>>>   arch/arm64/boot/dts/qcom/qdu1000-idp.dts | 24 ++++++++++++++++++++++++
>>>   1 file changed, 24 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts 
>>> b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> index 89b84fb0f70a..126bc71afd90 100644
>>> --- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> +++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
>>> @@ -500,3 +500,27 @@ &tlmm {
>>>   &uart7 {
>>>          status = "okay";
>>>   };
>>> +
>>> +&usb_1 {
>>> +       status = "okay";
>>> +};
>>> +
>>> +&usb_1_dwc3 {
>>> +       dr_mode = "peripheral";
>>
>> Are these ports really peripheral-only?

This was done for testing. Will add the usb-role-switch role.

>>
>>> +       maximum-speed = "high-speed";
> 
> More importantly, are these ports really HS-only?

Apologies for this, added it for testing purpose only, forgot to remove it.
Will remove it.

Thanks
Komal

> 
> Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
index 89b84fb0f70a..126bc71afd90 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qdu1000-idp.dts
@@ -500,3 +500,27 @@  &tlmm {
 &uart7 {
 	status = "okay";
 };
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l8a_0p91>;
+	vdda18-supply = <&vreg_l14a_1p8>;
+	vdda33-supply = <&vreg_l2a_2p3>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l8a_0p91>;
+	vdda-pll-supply = <&vreg_l3a_1p2>;
+
+	status = "okay";
+};