@@ -72,40 +72,24 @@ $defs:
description:
Specify the alternative function to be configured for the specified
pins.
- enum: [ gpio, atest_char, atest_char0, atest_char1, atest_char2,
- atest_char3, atest_usb0, atest_usb00, atest_usb01, atest_usb02,
- atest_usb03, audio_ref, cam_mclk, cci_async, cci_i2c,
- cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
- cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3, coex_uart1, cri_trng,
- cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, ddr_pxi1,
- dp0_hot, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, ibi_i3c,
- jitter_bist, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
- mdp_vsync3, mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws,
- mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0,
- mi2s_mclk1, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk,
- phase_flag0, phase_flag1, phase_flag10, phase_flag11,
- phase_flag12, phase_flag13, phase_flag14, phase_flag15,
- phase_flag16, phase_flag17, phase_flag18, phase_flag19,
- phase_flag2, phase_flag20, phase_flag21, phase_flag22,
- phase_flag23, phase_flag24, phase_flag25, phase_flag26,
- phase_flag27, phase_flag28, phase_flag29, phase_flag3,
- phase_flag30, phase_flag31, phase_flag4, phase_flag5,
- phase_flag6, phase_flag7, phase_flag8, phase_flag9,
- pll_bist, pll_clk, prng_rosc0, prng_rosc1, prng_rosc2,
- prng_rosc3, qdss_cti, qdss_gpio, qdss_gpio0, qdss_gpio1,
- qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14,
- qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5,
- qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, qlink0_enable,
- qlink0_request, qlink0_wmss, qlink1_enable, qlink1_request,
- qlink1_wmss, qlink2_enable, qlink2_request, qlink2_wmss,
- qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5,
- qup0_se6, qup0_se7, qup1_se0, qup1_se1, qup1_se2, qup1_se3,
- qup1_se4, qup1_se5, qup1_se6, sd_write, tb_trig, tgu_ch0,
- tgu_ch1, tgu_ch2, tgu_ch3, tmess_prng0, tmess_prng1,
- tmess_prng2, tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk,
- uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data,
- uim1_present, uim1_reset, usb0_hs, usb0_phy, vfr_0, vfr_1,
- vsense_trigger ]
+ enum: [ gpio, atest_char, atest_usb0, audio_ref_clk, cam_mclk,
+ cci_async_in0, cci_i2c, cci, cmu_rng, coex_uart1_rx,
+ coex_uart1_tx, cri_trng, dbg_out_clk, ddr_bist,
+ ddr_pxi0_test, ddr_pxi1_test, gcc_gp1_clk, gcc_gp2_clk,
+ gcc_gp3_clk, host2wlan_sol, ibi_i3c_qup0, ibi_i3c_qup1,
+ jitter_bist_ref, mdp_vsync0_out, mdp_vsync1_out,
+ mdp_vsync2_out, mdp_vsync3_out, mdp_vsync, nav,
+ pcie0_clk_req, phase_flag, pll_bist_sync, pll_clk_aux,
+ prng_rosc, qdss_cti_trig0, qdss_cti_trig1, qdss_gpio,
+ qlink0_enable, qlink0_request, qlink0_wmss_reset,
+ qup0_se0, qup0_se1, qup0_se2, qup0_se3, qup0_se4,
+ qup1_se0, qup1_se1, qup1_se2, qup1_se2_l2, qup1_se3,
+ qup1_se4, sd_write_protect, tb_trig_sdc1, tb_trig_sdc2,
+ tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
+ tgu_ch3_trigout, tmess_prng, tsense_pwm1_out,
+ tsense_pwm2_out, uim0, uim1, usb0_hs_ac, usb0_phy_ps,
+ vfr_0_mira, vfr_0_mirb, vfr_1, vsense_trigger_mirnat,
+ wlan1_adc_dtest0, wlan1_adc_dtest1 ]
required:
- pins
Some functions were consolidated in the SM4450 pinctrl driver, but they had not been updated in the binding file before the previous SM4450 pinctrl patch series was merged. Update functions in this binding file to match with SM4450 pinctrl driver. Some functions need to be consolidated and some functions need to be removed. The following functions are removed: - atest_char0, atest_char1, atest_char2, atest_char3 - atest_usb00, atest_usb01, atest_usb02, atest_usb03 - audio_ref - cci_async - cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4 - cmu_rng0, cmu_rng1, cmu_rng2, cmu_rng3 - coex_uart1 - cri_trng0, cri_trng1 - dbg_out - ddr_pxi0, ddr_pxi1 - dp0_hot - gcc_gp1, gcc_gp2, gcc_gp3 - ibi_i3c - jitter_bist - mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3 - mi2s0_data0, mi2s0_data1, mi2s0_sck, mi2s0_ws, mi2s2_data0, mi2s2_data1, mi2s2_sck, mi2s2_ws, mi2s_mclk0, mi2s_mclk1 - nav_gpio0, nav_gpio1, nav_gpio2 - phase_flag0, phase_flag1, phase_flag10, phase_flag11, phase_flag12, phase_flag13, phase_flag14, phase_flag15, phase_flag16, phase_flag17, phase_flag18, phase_flag19, phase_flag2, phase_flag20, phase_flag21, phase_flag22, phase_flag23, phase_flag24, phase_flag25, phase_flag26, phase_flag27, phase_flag28, phase_flag29, phase_flag3, phase_flag30, phase_flag31, phase_flag4, phase_flag5, phase_flag6, phase_flag7, phase_flag8, phase_flag9 - pll_bist, pll_clk - prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3 - qdss_gpio0, qdss_gpio1, qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, qdss_gpio14, qdss_gpio15, qdss_gpio2, qdss_gpio3, qdss_gpio4, qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9 - qlink0_wmss - qup0_se5, qup0_se6, qup0_se7, qup1_se5, qup1_se6 - sd_write - tb_trig - tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3 - tmess_prng0, tmess_prng1, tmess_prng2, tmess_prng3 - tsense_pwm1, tsense_pwm2 - uim0_clk, uim0_data, uim0_present, uim0_reset, uim1_clk, uim1_data, uim1_present, uim1_reset - usb0_hs, usb0_phy - vsense_trigger The following functions are added: - atest_char - atest_usb0 - audio_ref_clk - cci - cci_async_in0 - cmu_rng - coex_uart1_rx, coex_uart1_tx - dbg_out_clk - ddr_pxi0_test, ddr_pxi1_test - gcc_gp1_clk, gcc_gp2_clk, gcc_gp3_clk - ibi_i3c_qup0, ibi_i3c_qup1 - jitter_bist_ref - mdp_vsync - nav - phase_flag - pll_bist_sync, pll_clk_aux - prng_rosc - qlink0_wmss_reset - sd_write_protect - tb_trig_sdc1, tb_trig_sdc2 - tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout, tgu_ch3_trigout - tmess_prng - tsense_pwm1_out, tsense_pwm2_out - uim0, uim1 - usb0_hs_ac, usb0_phy_ps - vsense_trigger_mirnat - wlan1_adc_dtest0, wlan1_adc_dtest1 Fixes: 7bf8b78f86db ("dt-bindings: pinctrl: qcom: Add SM4450 pinctrl") Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com> --- .../bindings/pinctrl/qcom,sm4450-tlmm.yaml | 52 +++++++------------ 1 file changed, 18 insertions(+), 34 deletions(-)