| Message ID | 20240314-shinano-common-v2-3-a0fce1c72c74@z3ntu.xyz (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 8d91a5a4a6f5aff714a14ac4a86931aa789655d8 |
| Headers | show |
| Series | Split sony-castor into shinano-common and add Sony Xperia Z3 | expand |
On 14.03.2024 19:56, Luca Weiss wrote: > Add the dts for the Xperia Z3 smartphone which is based on Sony's > shinano platform, so at the moment there's little device-specific dts to > add on top of the common parts. > > Signed-off-by: Luca Weiss <luca@z3ntu.xyz> > --- [...] > + > +&smbb { > + usb-charge-current-limit = <1500000>; > + qcom,fast-charge-safe-current = <3000000>; > + qcom,fast-charge-current-limit = <2150000>; > + qcom,fast-charge-safe-voltage = <4400000>; > + qcom,fast-charge-high-threshold-voltage = <4350000>; > + qcom,auto-recharge-threshold-voltage = <4280000>; > + qcom,minimum-input-voltage = <4200000>; I took a quick look and without going deep into downstream code, these values look sane, so Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Konrad
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index 9cc1e14e6cd0..92eca505a4ab 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -45,6 +45,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8974pro-oneplus-bacon.dtb \ qcom-msm8974pro-samsung-klte.dtb \ qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ + qcom-msm8974pro-sony-xperia-shinano-leo.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ qcom-sdx55-mtp.dtb \ qcom-sdx55-t55.dtb \ diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts new file mode 100644 index 000000000000..1ed6e1cc21d5 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-leo.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi" + +/ { + model = "Sony Xperia Z3"; + compatible = "sony,xperia-leo", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + gpio-keys { + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; +}; + +&gpio_keys_pin_a { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <3000000>; + qcom,fast-charge-current-limit = <2150000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4280000>; + qcom,minimum-input-voltage = <4200000>; + + status = "okay"; +}; + +&synaptics_touchscreen { + vio-supply = <&pm8941_s3>; +};
Add the dts for the Xperia Z3 smartphone which is based on Sony's shinano platform, so at the moment there's little device-specific dts to add on top of the common parts. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> --- arch/arm/boot/dts/qcom/Makefile | 1 + .../qcom-msm8974pro-sony-xperia-shinano-leo.dts | 44 ++++++++++++++++++++++ 2 files changed, 45 insertions(+)