diff mbox series

[v4,1/2] drm/msm/dp: Add support for determining the eDP/DP mode from DT

Message ID 20240324-x1e80100-display-refactor-connector-v4-1-e0ebaea66a78@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series drm/msm/dp: Rework the eDP/DP modes and add support for X1E80100 | expand

Commit Message

Abel Vesa March 24, 2024, 6:56 p.m. UTC
Instead of relying on different compatibles for eDP and DP, lookup
the panel node in devicetree to figure out the connector type and
then pass on that information to the PHY. External DP doesn't have
a panel described in DT, therefore, assume it's eDP if panel node
is present.

Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

Comments

Dmitry Baryshkov March 24, 2024, 9:24 p.m. UTC | #1
On Sun, 24 Mar 2024 at 20:57, Abel Vesa <abel.vesa@linaro.org> wrote:
>
> Instead of relying on different compatibles for eDP and DP, lookup
> the panel node in devicetree to figure out the connector type and
> then pass on that information to the PHY. External DP doesn't have
> a panel described in DT, therefore, assume it's eDP if panel node
> is present.
>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  drivers/gpu/drm/msm/dp/dp_display.c | 29 ++++++++++++++++++++++++++++-
>  1 file changed, 28 insertions(+), 1 deletion(-)


Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Bjorn Andersson March 26, 2024, 7:14 p.m. UTC | #2
On Sun, Mar 24, 2024 at 08:56:51PM +0200, Abel Vesa wrote:
> Instead of relying on different compatibles for eDP and DP, lookup
> the panel node in devicetree to figure out the connector type and
> then pass on that information to the PHY. External DP doesn't have
> a panel described in DT, therefore, assume it's eDP if panel node
> is present.
> 

Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>

Regards,
Bjorn

> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  drivers/gpu/drm/msm/dp/dp_display.c | 29 ++++++++++++++++++++++++++++-
>  1 file changed, 28 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
> index c4cb82af5c2f..9169a739cc54 100644
> --- a/drivers/gpu/drm/msm/dp/dp_display.c
> +++ b/drivers/gpu/drm/msm/dp/dp_display.c
> @@ -726,6 +726,14 @@ static int dp_init_sub_modules(struct dp_display_private *dp)
>  	if (IS_ERR(phy))
>  		return PTR_ERR(phy);
>  
> +	rc = phy_set_mode_ext(phy, PHY_MODE_DP,
> +			      dp->dp_display.is_edp ? PHY_SUBMODE_EDP : PHY_SUBMODE_DP);
> +	if (rc) {
> +		DRM_ERROR("failed to set phy submode, rc = %d\n", rc);
> +		dp->catalog = NULL;
> +		goto error;
> +	}
> +
>  	dp->catalog = dp_catalog_get(dev);
>  	if (IS_ERR(dp->catalog)) {
>  		rc = PTR_ERR(dp->catalog);
> @@ -1241,6 +1249,25 @@ static int dp_auxbus_done_probe(struct drm_dp_aux *aux)
>  	return dp_display_probe_tail(aux->dev);
>  }
>  
> +static int dp_display_get_connector_type(struct platform_device *pdev,
> +					 const struct msm_dp_desc *desc)
> +{
> +	struct device_node *node = pdev->dev.of_node;
> +	struct device_node *aux_bus = of_get_child_by_name(node, "aux-bus");
> +	struct device_node *panel = of_get_child_by_name(aux_bus, "panel");
> +	int connector_type;
> +
> +	if (panel)
> +		connector_type = DRM_MODE_CONNECTOR_eDP;
> +	else
> +		connector_type = DRM_MODE_SUBCONNECTOR_DisplayPort;
> +
> +	of_node_put(panel);
> +	of_node_put(aux_bus);
> +
> +	return connector_type;
> +}
> +
>  static int dp_display_probe(struct platform_device *pdev)
>  {
>  	int rc = 0;
> @@ -1263,7 +1290,7 @@ static int dp_display_probe(struct platform_device *pdev)
>  	dp->dp_display.pdev = pdev;
>  	dp->name = "drm_dp";
>  	dp->id = desc->id;
> -	dp->dp_display.connector_type = desc->connector_type;
> +	dp->dp_display.connector_type = dp_display_get_connector_type(pdev, desc);
>  	dp->wide_bus_supported = desc->wide_bus_supported;
>  	dp->dp_display.is_edp =
>  		(dp->dp_display.connector_type == DRM_MODE_CONNECTOR_eDP);
> 
> -- 
> 2.34.1
>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index c4cb82af5c2f..9169a739cc54 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -726,6 +726,14 @@  static int dp_init_sub_modules(struct dp_display_private *dp)
 	if (IS_ERR(phy))
 		return PTR_ERR(phy);
 
+	rc = phy_set_mode_ext(phy, PHY_MODE_DP,
+			      dp->dp_display.is_edp ? PHY_SUBMODE_EDP : PHY_SUBMODE_DP);
+	if (rc) {
+		DRM_ERROR("failed to set phy submode, rc = %d\n", rc);
+		dp->catalog = NULL;
+		goto error;
+	}
+
 	dp->catalog = dp_catalog_get(dev);
 	if (IS_ERR(dp->catalog)) {
 		rc = PTR_ERR(dp->catalog);
@@ -1241,6 +1249,25 @@  static int dp_auxbus_done_probe(struct drm_dp_aux *aux)
 	return dp_display_probe_tail(aux->dev);
 }
 
+static int dp_display_get_connector_type(struct platform_device *pdev,
+					 const struct msm_dp_desc *desc)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct device_node *aux_bus = of_get_child_by_name(node, "aux-bus");
+	struct device_node *panel = of_get_child_by_name(aux_bus, "panel");
+	int connector_type;
+
+	if (panel)
+		connector_type = DRM_MODE_CONNECTOR_eDP;
+	else
+		connector_type = DRM_MODE_SUBCONNECTOR_DisplayPort;
+
+	of_node_put(panel);
+	of_node_put(aux_bus);
+
+	return connector_type;
+}
+
 static int dp_display_probe(struct platform_device *pdev)
 {
 	int rc = 0;
@@ -1263,7 +1290,7 @@  static int dp_display_probe(struct platform_device *pdev)
 	dp->dp_display.pdev = pdev;
 	dp->name = "drm_dp";
 	dp->id = desc->id;
-	dp->dp_display.connector_type = desc->connector_type;
+	dp->dp_display.connector_type = dp_display_get_connector_type(pdev, desc);
 	dp->wide_bus_supported = desc->wide_bus_supported;
 	dp->dp_display.is_edp =
 		(dp->dp_display.connector_type == DRM_MODE_CONNECTOR_eDP);