diff mbox series

[v3,2/3] clk: qcom: add IPQ9574 interconnect clocks support

Message ID 20240326121312.1702701-3-quic_varada@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add interconnect driver for IPQ9574 SoC | expand

Commit Message

Varadarajan Narayanan March 26, 2024, 12:13 p.m. UTC
Unlike MSM platforms that manage NoC related clocks and scaling
from RPM, IPQ SoCs dont involve RPM in managing NoC related
clocks and there is no NoC scaling.

However, there is a requirement to enable some NoC interface
clocks for accessing the peripheral controllers present on
these NoCs. Though exposing these as normal clocks would work,
having a minimalistic interconnect driver to handle these clocks
would make it consistent with other Qualcomm platforms resulting
in common code paths. This is similar to msm8996-cbf's usage of
icc-clk framework.

Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
v3: Use indexed identifiers here to avoid confusion
    Fix error messages and move to common.c
v2: Move DTS to separate patch
    Update commit log
    Auto select CONFIG_INTERCONNECT & CONFIG_INTERCONNECT_CLK to fix build error
---
 drivers/clk/qcom/Kconfig       |  2 ++
 drivers/clk/qcom/common.c      | 30 ++++++++++++++++
 drivers/clk/qcom/common.h      |  2 ++
 drivers/clk/qcom/gcc-ipq9574.c | 64 +++++++++++++++++++++++++++++++++-
 4 files changed, 97 insertions(+), 1 deletion(-)

Comments

Dmitry Baryshkov March 26, 2024, 12:37 p.m. UTC | #1
On Tue, 26 Mar 2024 at 14:14, Varadarajan Narayanan
<quic_varada@quicinc.com> wrote:
>
> Unlike MSM platforms that manage NoC related clocks and scaling
> from RPM, IPQ SoCs dont involve RPM in managing NoC related
> clocks and there is no NoC scaling.
>
> However, there is a requirement to enable some NoC interface
> clocks for accessing the peripheral controllers present on
> these NoCs. Though exposing these as normal clocks would work,
> having a minimalistic interconnect driver to handle these clocks
> would make it consistent with other Qualcomm platforms resulting
> in common code paths. This is similar to msm8996-cbf's usage of
> icc-clk framework.
>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---
> v3: Use indexed identifiers here to avoid confusion
>     Fix error messages and move to common.c
> v2: Move DTS to separate patch
>     Update commit log
>     Auto select CONFIG_INTERCONNECT & CONFIG_INTERCONNECT_CLK to fix build error
> ---
>  drivers/clk/qcom/Kconfig       |  2 ++
>  drivers/clk/qcom/common.c      | 30 ++++++++++++++++
>  drivers/clk/qcom/common.h      |  2 ++
>  drivers/clk/qcom/gcc-ipq9574.c | 64 +++++++++++++++++++++++++++++++++-
>  4 files changed, 97 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
> index 8ab08e7b5b6c..af73a0b396eb 100644
> --- a/drivers/clk/qcom/Kconfig
> +++ b/drivers/clk/qcom/Kconfig
> @@ -243,6 +243,8 @@ config IPQ_GCC_8074
>
>  config IPQ_GCC_9574
>         tristate "IPQ9574 Global Clock Controller"
> +       select INTERCONNECT
> +       select INTERCONNECT_CLK
>         help
>           Support for global clock controller on ipq9574 devices.
>           Say Y if you want to use peripheral devices such as UART, SPI,
> diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
> index 75f09e6e057e..b18d38509de5 100644
> --- a/drivers/clk/qcom/common.c
> +++ b/drivers/clk/qcom/common.c
> @@ -8,6 +8,8 @@
>  #include <linux/regmap.h>
>  #include <linux/platform_device.h>
>  #include <linux/clk-provider.h>
> +#include <linux/interconnect-clk.h>
> +#include <linux/interconnect-provider.h>
>  #include <linux/reset-controller.h>
>  #include <linux/of.h>
>
> @@ -337,4 +339,32 @@ int qcom_cc_probe_by_index(struct platform_device *pdev, int index,
>  }
>  EXPORT_SYMBOL_GPL(qcom_cc_probe_by_index);
>
> +int qcom_cc_icc_register(struct device *dev, struct clk_regmap *clks[],
> +                        int *noc_clks, int count, unsigned int first_id)
> +{
> +       struct icc_provider *provider;
> +       struct icc_clk_data *icd;
> +       int i;
> +
> +       icd = devm_kcalloc(dev, count, sizeof(*icd), GFP_KERNEL);
> +       if (IS_ERR_OR_NULL(icd))

Can devm_kcalloc return ERR?

> +               return dev_err_probe(dev, PTR_ERR(icd),
> +                                    "malloc for clock data failed\n");

So, this becomes dev_err_prove(dev, 0, "..."). returning 0. Not the
expected result for the error case.

> +
> +       for (i = 0; i < count; i++) {
> +               icd[i].clk = clks[noc_clks[i]]->hw.clk;
> +               if (IS_ERR_OR_NULL(icd[i].clk))
> +                       return dev_err_probe(dev, -ENOENT,
> +                                            "%d clock not found\n", noc_clks[i]);

This is even better. Potential NULL pointer exception, then useless
ERR_OR_NULL  and finally API abuse.
Please use clk_hw_get_clk(), it is there for you.

> +               icd[i].name = clk_hw_get_name(&clks[noc_clks[i]]->hw);
> +       }
> +
> +       provider = icc_clk_register(dev, first_id, count, icd);
> +       if (IS_ERR_OR_NULL(provider))
> +               return dev_err_probe(dev, PTR_ERR(provider),
> +                                    "icc_clk_register failed\n");
> +
> +       return 0;
> +}
> +
>  MODULE_LICENSE("GPL v2");
> diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
> index 9c8f7b798d9f..4fce5e229fc1 100644
> --- a/drivers/clk/qcom/common.h
> +++ b/drivers/clk/qcom/common.h
> @@ -65,5 +65,7 @@ extern int qcom_cc_probe(struct platform_device *pdev,
>                          const struct qcom_cc_desc *desc);
>  extern int qcom_cc_probe_by_index(struct platform_device *pdev, int index,
>                                   const struct qcom_cc_desc *desc);
> +int qcom_cc_icc_register(struct device *dev, struct clk_regmap *clks[],
> +                        int *noc_clks, int count, unsigned int first_id);

Add this function to the qcom_cc_probe() call stream. Change it to
pass an array of clk_hw instead of passing indices.

>
>  #endif
> diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
> index 0a3f846695b8..c63c44b6740f 100644
> --- a/drivers/clk/qcom/gcc-ipq9574.c
> +++ b/drivers/clk/qcom/gcc-ipq9574.c
> @@ -12,6 +12,7 @@
>
>  #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
>  #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
> +#include <dt-bindings/interconnect/qcom,ipq9574.h>
>
>  #include "clk-alpha-pll.h"
>  #include "clk-branch.h"
> @@ -4301,6 +4302,56 @@ static const struct qcom_reset_map gcc_ipq9574_resets[] = {
>         [GCC_WCSS_Q6_TBU_BCR] = { 0x12054, 0 },
>  };
>
> +#define IPQ_APPS_ID                    9574    /* some unique value */
> +
> +enum {
> +       ICC_ANOC_PCIE0,
> +       ICC_SNOC_PCIE0,
> +       ICC_ANOC_PCIE1,
> +       ICC_SNOC_PCIE1,
> +       ICC_ANOC_PCIE2,
> +       ICC_SNOC_PCIE2,
> +       ICC_ANOC_PCIE3,
> +       ICC_SNOC_PCIE3,
> +       ICC_SNOC_USB,
> +       ICC_ANOC_USB_AXI,
> +       ICC_NSSNOC_NSSCC,
> +       ICC_NSSNOC_SNOC_0,
> +       ICC_NSSNOC_SNOC_1,
> +       ICC_NSSNOC_PCNOC_1,
> +       ICC_NSSNOC_QOSGEN_REF,
> +       ICC_NSSNOC_TIMEOUT_REF,
> +       ICC_NSSNOC_XO_DCD,
> +       ICC_NSSNOC_ATB,
> +       ICC_MEM_NOC_NSSNOC,
> +       ICC_NSSNOC_MEMNOC,
> +       ICC_NSSNOC_MEM_NOC_1,
> +};
> +
> +static int noc_clks[] = {
> +       [ICC_ANOC_PCIE0] = GCC_ANOC_PCIE0_1LANE_M_CLK,
> +       [ICC_SNOC_PCIE0] = GCC_SNOC_PCIE0_1LANE_S_CLK,
> +       [ICC_ANOC_PCIE1] = GCC_ANOC_PCIE1_1LANE_M_CLK,
> +       [ICC_SNOC_PCIE1] = GCC_SNOC_PCIE1_1LANE_S_CLK,
> +       [ICC_ANOC_PCIE2] = GCC_ANOC_PCIE2_2LANE_M_CLK,
> +       [ICC_SNOC_PCIE2] = GCC_SNOC_PCIE2_2LANE_S_CLK,
> +       [ICC_ANOC_PCIE3] = GCC_ANOC_PCIE3_2LANE_M_CLK,
> +       [ICC_SNOC_PCIE3] = GCC_SNOC_PCIE3_2LANE_S_CLK,
> +       [ICC_SNOC_USB] = GCC_SNOC_USB_CLK,
> +       [ICC_ANOC_USB_AXI] = GCC_ANOC_USB_AXI_CLK,
> +       [ICC_NSSNOC_NSSCC] = GCC_NSSNOC_NSSCC_CLK,
> +       [ICC_NSSNOC_SNOC_0] = GCC_NSSNOC_SNOC_CLK,
> +       [ICC_NSSNOC_SNOC_1] = GCC_NSSNOC_SNOC_1_CLK,
> +       [ICC_NSSNOC_PCNOC_1] = GCC_NSSNOC_PCNOC_1_CLK,
> +       [ICC_NSSNOC_QOSGEN_REF] = GCC_NSSNOC_QOSGEN_REF_CLK,
> +       [ICC_NSSNOC_TIMEOUT_REF] = GCC_NSSNOC_TIMEOUT_REF_CLK,
> +       [ICC_NSSNOC_XO_DCD] = GCC_NSSNOC_XO_DCD_CLK,
> +       [ICC_NSSNOC_ATB] = GCC_NSSNOC_ATB_CLK,
> +       [ICC_MEM_NOC_NSSNOC] = GCC_MEM_NOC_NSSNOC_CLK,
> +       [ICC_NSSNOC_MEMNOC] = GCC_NSSNOC_MEMNOC_CLK,
> +       [ICC_NSSNOC_MEM_NOC_1] = GCC_NSSNOC_MEM_NOC_1_CLK,
> +};
> +
>  static const struct of_device_id gcc_ipq9574_match_table[] = {
>         { .compatible = "qcom,ipq9574-gcc" },
>         { }
> @@ -4327,7 +4378,18 @@ static const struct qcom_cc_desc gcc_ipq9574_desc = {
>
>  static int gcc_ipq9574_probe(struct platform_device *pdev)
>  {
> -       return qcom_cc_probe(pdev, &gcc_ipq9574_desc);
> +       int ret;
> +
> +       ret = qcom_cc_probe(pdev, &gcc_ipq9574_desc);
> +       if (ret)
> +               return dev_err_probe(&pdev->dev, ret, "clock probe failed\n");
> +
> +       ret = qcom_cc_icc_register(&pdev->dev, gcc_ipq9574_clks, noc_clks,
> +                                  ARRAY_SIZE(noc_clks), IPQ_APPS_ID);
> +       if (ret)
> +               return dev_err_probe(&pdev->dev, ret, "interconnect register failed\n");

So, even if we had a useful message from the called function, it has
become overridden with the useless "failed" message. Please don't do
that.

> +
> +       return 0;
>  }
>
>  static struct platform_driver gcc_ipq9574_driver = {
> --
> 2.34.1
>
>
Varadarajan Narayanan March 27, 2024, 8:21 a.m. UTC | #2
Dmitry,

On Tue, Mar 26, 2024 at 02:37:20PM +0200, Dmitry Baryshkov wrote:
> On Tue, 26 Mar 2024 at 14:14, Varadarajan Narayanan
> <quic_varada@quicinc.com> wrote:
> >
> > Unlike MSM platforms that manage NoC related clocks and scaling
> > from RPM, IPQ SoCs dont involve RPM in managing NoC related
> > clocks and there is no NoC scaling.
> >
> > However, there is a requirement to enable some NoC interface
> > clocks for accessing the peripheral controllers present on
> > these NoCs. Though exposing these as normal clocks would work,
> > having a minimalistic interconnect driver to handle these clocks
> > would make it consistent with other Qualcomm platforms resulting
> > in common code paths. This is similar to msm8996-cbf's usage of
> > icc-clk framework.
> >
> > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>

Have posted the next version addressing your comments.
Please review.

Thanks
Varada
diff mbox series

Patch

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 8ab08e7b5b6c..af73a0b396eb 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -243,6 +243,8 @@  config IPQ_GCC_8074
 
 config IPQ_GCC_9574
 	tristate "IPQ9574 Global Clock Controller"
+	select INTERCONNECT
+	select INTERCONNECT_CLK
 	help
 	  Support for global clock controller on ipq9574 devices.
 	  Say Y if you want to use peripheral devices such as UART, SPI,
diff --git a/drivers/clk/qcom/common.c b/drivers/clk/qcom/common.c
index 75f09e6e057e..b18d38509de5 100644
--- a/drivers/clk/qcom/common.c
+++ b/drivers/clk/qcom/common.c
@@ -8,6 +8,8 @@ 
 #include <linux/regmap.h>
 #include <linux/platform_device.h>
 #include <linux/clk-provider.h>
+#include <linux/interconnect-clk.h>
+#include <linux/interconnect-provider.h>
 #include <linux/reset-controller.h>
 #include <linux/of.h>
 
@@ -337,4 +339,32 @@  int qcom_cc_probe_by_index(struct platform_device *pdev, int index,
 }
 EXPORT_SYMBOL_GPL(qcom_cc_probe_by_index);
 
+int qcom_cc_icc_register(struct device *dev, struct clk_regmap *clks[],
+			 int *noc_clks, int count, unsigned int first_id)
+{
+	struct icc_provider *provider;
+	struct icc_clk_data *icd;
+	int i;
+
+	icd = devm_kcalloc(dev, count, sizeof(*icd), GFP_KERNEL);
+	if (IS_ERR_OR_NULL(icd))
+		return dev_err_probe(dev, PTR_ERR(icd),
+				     "malloc for clock data failed\n");
+
+	for (i = 0; i < count; i++) {
+		icd[i].clk = clks[noc_clks[i]]->hw.clk;
+		if (IS_ERR_OR_NULL(icd[i].clk))
+			return dev_err_probe(dev, -ENOENT,
+					     "%d clock not found\n", noc_clks[i]);
+		icd[i].name = clk_hw_get_name(&clks[noc_clks[i]]->hw);
+	}
+
+	provider = icc_clk_register(dev, first_id, count, icd);
+	if (IS_ERR_OR_NULL(provider))
+		return dev_err_probe(dev, PTR_ERR(provider),
+				     "icc_clk_register failed\n");
+
+	return 0;
+}
+
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/clk/qcom/common.h b/drivers/clk/qcom/common.h
index 9c8f7b798d9f..4fce5e229fc1 100644
--- a/drivers/clk/qcom/common.h
+++ b/drivers/clk/qcom/common.h
@@ -65,5 +65,7 @@  extern int qcom_cc_probe(struct platform_device *pdev,
 			 const struct qcom_cc_desc *desc);
 extern int qcom_cc_probe_by_index(struct platform_device *pdev, int index,
 				  const struct qcom_cc_desc *desc);
+int qcom_cc_icc_register(struct device *dev, struct clk_regmap *clks[],
+			 int *noc_clks, int count, unsigned int first_id);
 
 #endif
diff --git a/drivers/clk/qcom/gcc-ipq9574.c b/drivers/clk/qcom/gcc-ipq9574.c
index 0a3f846695b8..c63c44b6740f 100644
--- a/drivers/clk/qcom/gcc-ipq9574.c
+++ b/drivers/clk/qcom/gcc-ipq9574.c
@@ -12,6 +12,7 @@ 
 
 #include <dt-bindings/clock/qcom,ipq9574-gcc.h>
 #include <dt-bindings/reset/qcom,ipq9574-gcc.h>
+#include <dt-bindings/interconnect/qcom,ipq9574.h>
 
 #include "clk-alpha-pll.h"
 #include "clk-branch.h"
@@ -4301,6 +4302,56 @@  static const struct qcom_reset_map gcc_ipq9574_resets[] = {
 	[GCC_WCSS_Q6_TBU_BCR] = { 0x12054, 0 },
 };
 
+#define IPQ_APPS_ID			9574	/* some unique value */
+
+enum {
+	ICC_ANOC_PCIE0,
+	ICC_SNOC_PCIE0,
+	ICC_ANOC_PCIE1,
+	ICC_SNOC_PCIE1,
+	ICC_ANOC_PCIE2,
+	ICC_SNOC_PCIE2,
+	ICC_ANOC_PCIE3,
+	ICC_SNOC_PCIE3,
+	ICC_SNOC_USB,
+	ICC_ANOC_USB_AXI,
+	ICC_NSSNOC_NSSCC,
+	ICC_NSSNOC_SNOC_0,
+	ICC_NSSNOC_SNOC_1,
+	ICC_NSSNOC_PCNOC_1,
+	ICC_NSSNOC_QOSGEN_REF,
+	ICC_NSSNOC_TIMEOUT_REF,
+	ICC_NSSNOC_XO_DCD,
+	ICC_NSSNOC_ATB,
+	ICC_MEM_NOC_NSSNOC,
+	ICC_NSSNOC_MEMNOC,
+	ICC_NSSNOC_MEM_NOC_1,
+};
+
+static int noc_clks[] = {
+	[ICC_ANOC_PCIE0] = GCC_ANOC_PCIE0_1LANE_M_CLK,
+	[ICC_SNOC_PCIE0] = GCC_SNOC_PCIE0_1LANE_S_CLK,
+	[ICC_ANOC_PCIE1] = GCC_ANOC_PCIE1_1LANE_M_CLK,
+	[ICC_SNOC_PCIE1] = GCC_SNOC_PCIE1_1LANE_S_CLK,
+	[ICC_ANOC_PCIE2] = GCC_ANOC_PCIE2_2LANE_M_CLK,
+	[ICC_SNOC_PCIE2] = GCC_SNOC_PCIE2_2LANE_S_CLK,
+	[ICC_ANOC_PCIE3] = GCC_ANOC_PCIE3_2LANE_M_CLK,
+	[ICC_SNOC_PCIE3] = GCC_SNOC_PCIE3_2LANE_S_CLK,
+	[ICC_SNOC_USB] = GCC_SNOC_USB_CLK,
+	[ICC_ANOC_USB_AXI] = GCC_ANOC_USB_AXI_CLK,
+	[ICC_NSSNOC_NSSCC] = GCC_NSSNOC_NSSCC_CLK,
+	[ICC_NSSNOC_SNOC_0] = GCC_NSSNOC_SNOC_CLK,
+	[ICC_NSSNOC_SNOC_1] = GCC_NSSNOC_SNOC_1_CLK,
+	[ICC_NSSNOC_PCNOC_1] = GCC_NSSNOC_PCNOC_1_CLK,
+	[ICC_NSSNOC_QOSGEN_REF] = GCC_NSSNOC_QOSGEN_REF_CLK,
+	[ICC_NSSNOC_TIMEOUT_REF] = GCC_NSSNOC_TIMEOUT_REF_CLK,
+	[ICC_NSSNOC_XO_DCD] = GCC_NSSNOC_XO_DCD_CLK,
+	[ICC_NSSNOC_ATB] = GCC_NSSNOC_ATB_CLK,
+	[ICC_MEM_NOC_NSSNOC] = GCC_MEM_NOC_NSSNOC_CLK,
+	[ICC_NSSNOC_MEMNOC] = GCC_NSSNOC_MEMNOC_CLK,
+	[ICC_NSSNOC_MEM_NOC_1] = GCC_NSSNOC_MEM_NOC_1_CLK,
+};
+
 static const struct of_device_id gcc_ipq9574_match_table[] = {
 	{ .compatible = "qcom,ipq9574-gcc" },
 	{ }
@@ -4327,7 +4378,18 @@  static const struct qcom_cc_desc gcc_ipq9574_desc = {
 
 static int gcc_ipq9574_probe(struct platform_device *pdev)
 {
-	return qcom_cc_probe(pdev, &gcc_ipq9574_desc);
+	int ret;
+
+	ret = qcom_cc_probe(pdev, &gcc_ipq9574_desc);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "clock probe failed\n");
+
+	ret = qcom_cc_icc_register(&pdev->dev, gcc_ipq9574_clks, noc_clks,
+				   ARRAY_SIZE(noc_clks), IPQ_APPS_ID);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "interconnect register failed\n");
+
+	return 0;
 }
 
 static struct platform_driver gcc_ipq9574_driver = {