diff mbox series

[v5,02/11] scsi: ufs: qcom: Perform read back after writing REG_UFS_SYS1CLK_1US

Message ID 20240329-ufs-reset-ensure-effect-before-delay-v5-2-181252004586@redhat.com (mailing list archive)
State Not Applicable
Headers show
Series scsi: ufs: Remove overzealous memory barriers | expand

Commit Message

Andrew Halaney March 29, 2024, 8:46 p.m. UTC
Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
that write has gone through to the device.

mb() ensure that the write completes, but completion doesn't mean that
it isn't stored in a buffer somewhere. The recommendation for
ensuring this bit has taken effect on the device is to perform a read
back to force it to make it all the way to the device. This is
documented in device-io.rst and a talk by Will Deacon on this can
be seen over here:

    https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678

Let's do that to ensure the bit hits the device. Because the mb()'s
purpose wasn't to add extra ordering (on top of the ordering guaranteed
by writel()/readl()), it can safely be removed.

Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
Reviewed-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
---
 drivers/ufs/host/ufs-qcom.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Manivannan Sadhasivam April 2, 2024, 4:45 a.m. UTC | #1
On Fri, Mar 29, 2024 at 03:46:44PM -0500, Andrew Halaney wrote:
> Currently after writing to REG_UFS_SYS1CLK_1US a mb() is used to ensure
> that write has gone through to the device.
> 
> mb() ensure that the write completes, but completion doesn't mean that
> it isn't stored in a buffer somewhere. The recommendation for
> ensuring this bit has taken effect on the device is to perform a read
> back to force it to make it all the way to the device. This is
> documented in device-io.rst and a talk by Will Deacon on this can
> be seen over here:
> 
>     https://youtu.be/i6DayghhA8Q?si=MiyxB5cKJXSaoc01&t=1678
> 
> Let's do that to ensure the bit hits the device. Because the mb()'s
> purpose wasn't to add extra ordering (on top of the ordering guaranteed
> by writel()/readl()), it can safely be removed.
> 
> Fixes: f06fcc7155dc ("scsi: ufs-qcom: add QUniPro hardware support and power optimizations")
> Reviewed-by: Can Guo <quic_cang@quicinc.com>
> Signed-off-by: Andrew Halaney <ahalaney@redhat.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
>  drivers/ufs/host/ufs-qcom.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
> index 06859e17b67b..804dc8153e7b 100644
> --- a/drivers/ufs/host/ufs-qcom.c
> +++ b/drivers/ufs/host/ufs-qcom.c
> @@ -501,7 +501,7 @@ static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
>  		 * make sure above write gets applied before we return from
>  		 * this function.
>  		 */
> -		mb();
> +		ufshcd_readl(hba, REG_UFS_SYS1CLK_1US);
>  	}
>  
>  	return 0;
> 
> -- 
> 2.44.0
> 
>
diff mbox series

Patch

diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c
index 06859e17b67b..804dc8153e7b 100644
--- a/drivers/ufs/host/ufs-qcom.c
+++ b/drivers/ufs/host/ufs-qcom.c
@@ -501,7 +501,7 @@  static int ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear,
 		 * make sure above write gets applied before we return from
 		 * this function.
 		 */
-		mb();
+		ufshcd_readl(hba, REG_UFS_SYS1CLK_1US);
 	}
 
 	return 0;