diff mbox series

[4/4] arm64: dts: qcom: Add Motorola Moto G 2015 (osprey)

Message ID 20240405-msm8916-moto-init-v1-4-502b58176d34@trvn.ru (mailing list archive)
State New
Headers show
Series Introduce msm8916 based Motorola devices | expand

Commit Message

Nikita Travkin April 5, 2024, 2:06 p.m. UTC 
From: Martijn Braam <martijn@brixit.nl>

Motorola Moto G 2015 is an msm8916 based smartphone.

Supported features:

- eMMC and SD;
- Buttons;
- Touchscreen;
- USB;
- Fuel Gauge;
- Sound.

Signed-off-by: Martijn Braam <martijn@brixit.nl>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
[Nikita: Use common dtsi]
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
---
 arch/arm64/boot/dts/qcom/Makefile                  |   1 +
 .../boot/dts/qcom/msm8916-motorola-osprey.dts      | 105 +++++++++++++++++++++
 2 files changed, 106 insertions(+)

Comments

Konrad Dybcio April 9, 2024, 9:46 a.m. UTC | #1 
On 4/5/24 16:06, Nikita Travkin wrote:
> From: Martijn Braam <martijn@brixit.nl>
> 
> Motorola Moto G 2015 is an msm8916 based smartphone.
> 
> Supported features:
> 
> - eMMC and SD;
> - Buttons;
> - Touchscreen;
> - USB;
> - Fuel Gauge;
> - Sound.
> 
> Signed-off-by: Martijn Braam <martijn@brixit.nl>
> Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
> [Nikita: Use common dtsi]
> Signed-off-by: Nikita Travkin <nikita@trvn.ru>
> ---

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index acf3ee316fba..ff23afb1b0db 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -32,6 +32,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-huawei-g7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8150.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-longcheer-l8910.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-motorola-harpia.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-motorola-osprey.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-motorola-surnia.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-mtp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-samsung-a3u-eur.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts
new file mode 100644
index 000000000000..ec5589fc69bd
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8916-motorola-osprey.dts
@@ -0,0 +1,105 @@ 
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "msm8916-motorola-common.dtsi"
+
+/ {
+	model = "Motorola Moto G 2015";
+	compatible = "motorola,osprey", "qcom,msm8916";
+	chassis-type = "handset";
+
+	reg_touch_vdda: regulator-touch-vdda {
+		compatible = "regulator-fixed";
+		regulator-name = "touch_vdda";
+		gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-0 = <&touch_vdda_default>;
+		pinctrl-names = "default";
+		startup-delay-us = <300>;
+		vin-supply = <&pm8916_l16>;
+	};
+};
+
+&blsp_i2c1 {
+	status = "okay";
+
+	battery@36 {
+		compatible = "maxim,max17050";
+		reg = <0x36>;
+
+		interrupts-extended = <&tlmm 49 IRQ_TYPE_EDGE_FALLING>;
+
+		pinctrl-0 = <&battery_alert_default>;
+		pinctrl-names = "default";
+
+		maxim,rsns-microohm = <10000>;
+		maxim,over-heat-temp = <600>;
+		maxim,cold-temp = <(-200)>;
+		maxim,dead-volt = <3200>;
+		maxim,over-volt = <4500>;
+
+	};
+};
+
+&blsp_i2c6 {
+	/* magnetometer@c */
+};
+
+&pm8916_codec {
+	qcom,micbias1-ext-cap;
+	qcom,micbias2-ext-cap;
+};
+
+&sdhc_2 {
+	pinctrl-0 = <&sdc2_default &sdc2_cd_default>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_cd_default>;
+	pinctrl-names = "default", "sleep";
+
+	cd-gpios = <&tlmm 25 GPIO_ACTIVE_LOW>;
+};
+
+&sound {
+	audio-routing =
+		"AMIC1", "MIC BIAS External1",
+		"AMIC3", "MIC BIAS External1";
+};
+
+&touchscreen {
+	interrupts-extended = <&tlmm 21 IRQ_TYPE_EDGE_FALLING>;
+
+	vdd-supply = <&reg_touch_vdda>;
+
+	pinctrl-0 = <&ts_int_default>;
+	pinctrl-names = "default";
+};
+
+&tlmm {
+	battery_alert_default: battery-alert-default-state {
+		pins = "gpio49";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	sdc2_cd_default: sdc2-cd-default-state {
+		pins = "gpio25";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	ts_int_default: ts-int-default-state {
+		pins = "gpio21";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	touch_vdda_default: touch-vdda-default-state {
+		pins = "gpio114";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};