diff mbox series

[v2,2/3] arm64: dts: qcom: x1e80100-crd: Add data-lanes and link-frequencies to DP3

Message ID 20240419-x1e80100-dts-fix-mdss-dp3-v2-2-10f4ed7a09b4@linaro.org (mailing list archive)
State Accepted
Headers show
Series arm64: dts: qcom: x1e80100: Fix the data-lanes and link-frequencies | expand

Commit Message

Abel Vesa April 19, 2024, 4:13 p.m. UTC
The data-lanes are a property of the out remote endpoint, so move them
from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
mdss_dp3_out and make sure to include all frequencies.

Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
---
 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

Comments

Dmitry Baryshkov April 19, 2024, 6:12 p.m. UTC | #1
On Fri, 19 Apr 2024 at 19:14, Abel Vesa <abel.vesa@linaro.org> wrote:
>
> The data-lanes are a property of the out remote endpoint, so move them
> from mdss_dp3 to the mdss_dp3_out. Also add the link-frequencies to
> mdss_dp3_out and make sure to include all frequencies.
>
> Fixes: d7e03cce0400 ("arm64: dts: qcom: x1e80100-crd: Enable more support")
> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index d4198fa204fd..c5c2895b37c7 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -599,8 +599,6 @@  &mdss_dp3 {
 	compatible = "qcom,x1e80100-dp";
 	/delete-property/ #sound-dai-cells;
 
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
 
 	aux-bus {
@@ -620,6 +618,9 @@  ports {
 		port@1 {
 			reg = <1>;
 			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
 				remote-endpoint = <&edp_panel_in>;
 			};
 		};