| Message ID | 20240420044901.884098-9-quic_kriskura@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | Add multiport support for DWC3 controllers | expand |
On Sat, Apr 20, 2024, Krishna Kurapati wrote: > DWC3 Qcom wrapper currently supports only wakeup configuration > for single port controllers. Read speed of each port connected > to the controller and enable wakeup for each of them accordingly. > > Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> > Reviewed-by: Johan Hovold <johan+linaro@kernel.org> > Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com> > --- > drivers/usb/dwc3/dwc3-qcom.c | 71 +++++++++++++++++++++--------------- > 1 file changed, 41 insertions(+), 30 deletions(-) > > diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c > index 5ddb694dd8e7..b6f13bb14e2c 100644 > --- a/drivers/usb/dwc3/dwc3-qcom.c > +++ b/drivers/usb/dwc3/dwc3-qcom.c > @@ -60,6 +60,7 @@ struct dwc3_qcom_port { > int dp_hs_phy_irq; > int dm_hs_phy_irq; > int ss_phy_irq; > + enum usb_device_speed usb2_speed; > }; > > struct dwc3_qcom { > @@ -71,7 +72,6 @@ struct dwc3_qcom { > struct reset_control *resets; > struct dwc3_qcom_port ports[DWC3_QCOM_MAX_PORTS]; > u8 num_ports; > - enum usb_device_speed usb2_speed; > > struct extcon_dev *edev; > struct extcon_dev *host_edev; > @@ -310,7 +310,7 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) > return dwc->xhci; > } > > -static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom) > +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, int port_index) > { > struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); > struct usb_device *udev; > @@ -321,14 +321,8 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom) > */ > hcd = platform_get_drvdata(dwc->xhci); > > - /* > - * It is possible to query the speed of all children of > - * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code > - * currently supports only 1 port per controller. So > - * this is sufficient. > - */ > #ifdef CONFIG_USB > - udev = usb_hub_find_child(hcd->self.root_hub, 1); > + udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1); > #else > udev = NULL; > #endif > @@ -359,26 +353,26 @@ static void dwc3_qcom_disable_wakeup_irq(int irq) > disable_irq_nosync(irq); > } > > -static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) > +static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port) > { > - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq); > + dwc3_qcom_disable_wakeup_irq(port->qusb2_phy_irq); > > - if (qcom->usb2_speed == USB_SPEED_LOW) { > - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq); > - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || > - (qcom->usb2_speed == USB_SPEED_FULL)) { > - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq); > + if (port->usb2_speed == USB_SPEED_LOW) { > + dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq); > + } else if ((port->usb2_speed == USB_SPEED_HIGH) || > + (port->usb2_speed == USB_SPEED_FULL)) { > + dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq); > } else { > - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq); > - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq); > + dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq); > + dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq); > } > > - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq); > + dwc3_qcom_disable_wakeup_irq(port->ss_phy_irq); > } > > -static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) > +static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port) > { > - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0); > + dwc3_qcom_enable_wakeup_irq(port->qusb2_phy_irq, 0); > > /* > * Configure DP/DM line interrupts based on the USB2 device attached to > @@ -389,21 +383,37 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) > * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario. > */ > > - if (qcom->usb2_speed == USB_SPEED_LOW) { > - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq, > + if (port->usb2_speed == USB_SPEED_LOW) { > + dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq, > IRQ_TYPE_EDGE_FALLING); > - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || > - (qcom->usb2_speed == USB_SPEED_FULL)) { > - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq, > + } else if ((port->usb2_speed == USB_SPEED_HIGH) || > + (port->usb2_speed == USB_SPEED_FULL)) { > + dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq, > IRQ_TYPE_EDGE_FALLING); > } else { > - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq, > + dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq, > IRQ_TYPE_EDGE_RISING); > - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq, > + dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq, > IRQ_TYPE_EDGE_RISING); > } > > - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0); > + dwc3_qcom_enable_wakeup_irq(port->ss_phy_irq, 0); > +} > + > +static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) > +{ > + int i; > + > + for (i = 0; i < qcom->num_ports; i++) > + dwc3_qcom_disable_port_interrupts(&qcom->ports[i]); > +} > + > +static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) > +{ > + int i; > + > + for (i = 0; i < qcom->num_ports; i++) > + dwc3_qcom_enable_port_interrupts(&qcom->ports[i]); > } > > static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) > @@ -430,7 +440,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) > * freezable workqueue. > */ > if (dwc3_qcom_is_host(qcom) && wakeup) { > - qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom); > + for (i = 0; i < qcom->num_ports; i++) > + qcom->ports[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i); > dwc3_qcom_enable_interrupts(qcom); > } > > -- > 2.34.1 > Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Thanks, Thinh
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c index 5ddb694dd8e7..b6f13bb14e2c 100644 --- a/drivers/usb/dwc3/dwc3-qcom.c +++ b/drivers/usb/dwc3/dwc3-qcom.c @@ -60,6 +60,7 @@ struct dwc3_qcom_port { int dp_hs_phy_irq; int dm_hs_phy_irq; int ss_phy_irq; + enum usb_device_speed usb2_speed; }; struct dwc3_qcom { @@ -71,7 +72,6 @@ struct dwc3_qcom { struct reset_control *resets; struct dwc3_qcom_port ports[DWC3_QCOM_MAX_PORTS]; u8 num_ports; - enum usb_device_speed usb2_speed; struct extcon_dev *edev; struct extcon_dev *host_edev; @@ -310,7 +310,7 @@ static bool dwc3_qcom_is_host(struct dwc3_qcom *qcom) return dwc->xhci; } -static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom) +static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom, int port_index) { struct dwc3 *dwc = platform_get_drvdata(qcom->dwc3); struct usb_device *udev; @@ -321,14 +321,8 @@ static enum usb_device_speed dwc3_qcom_read_usb2_speed(struct dwc3_qcom *qcom) */ hcd = platform_get_drvdata(dwc->xhci); - /* - * It is possible to query the speed of all children of - * USB2.0 root hub via usb_hub_for_each_child(). DWC3 code - * currently supports only 1 port per controller. So - * this is sufficient. - */ #ifdef CONFIG_USB - udev = usb_hub_find_child(hcd->self.root_hub, 1); + udev = usb_hub_find_child(hcd->self.root_hub, port_index + 1); #else udev = NULL; #endif @@ -359,26 +353,26 @@ static void dwc3_qcom_disable_wakeup_irq(int irq) disable_irq_nosync(irq); } -static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) +static void dwc3_qcom_disable_port_interrupts(struct dwc3_qcom_port *port) { - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq); + dwc3_qcom_disable_wakeup_irq(port->qusb2_phy_irq); - if (qcom->usb2_speed == USB_SPEED_LOW) { - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq); - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || - (qcom->usb2_speed == USB_SPEED_FULL)) { - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq); + if (port->usb2_speed == USB_SPEED_LOW) { + dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq); + } else if ((port->usb2_speed == USB_SPEED_HIGH) || + (port->usb2_speed == USB_SPEED_FULL)) { + dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq); } else { - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq); - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(port->dp_hs_phy_irq); + dwc3_qcom_disable_wakeup_irq(port->dm_hs_phy_irq); } - dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq); + dwc3_qcom_disable_wakeup_irq(port->ss_phy_irq); } -static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) +static void dwc3_qcom_enable_port_interrupts(struct dwc3_qcom_port *port) { - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0); + dwc3_qcom_enable_wakeup_irq(port->qusb2_phy_irq, 0); /* * Configure DP/DM line interrupts based on the USB2 device attached to @@ -389,21 +383,37 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) * DP and DM lines as rising edge to detect HS/HS/LS device connect scenario. */ - if (qcom->usb2_speed == USB_SPEED_LOW) { - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq, + if (port->usb2_speed == USB_SPEED_LOW) { + dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq, IRQ_TYPE_EDGE_FALLING); - } else if ((qcom->usb2_speed == USB_SPEED_HIGH) || - (qcom->usb2_speed == USB_SPEED_FULL)) { - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq, + } else if ((port->usb2_speed == USB_SPEED_HIGH) || + (port->usb2_speed == USB_SPEED_FULL)) { + dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq, IRQ_TYPE_EDGE_FALLING); } else { - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq, + dwc3_qcom_enable_wakeup_irq(port->dp_hs_phy_irq, IRQ_TYPE_EDGE_RISING); - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq, + dwc3_qcom_enable_wakeup_irq(port->dm_hs_phy_irq, IRQ_TYPE_EDGE_RISING); } - dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0); + dwc3_qcom_enable_wakeup_irq(port->ss_phy_irq, 0); +} + +static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom) +{ + int i; + + for (i = 0; i < qcom->num_ports; i++) + dwc3_qcom_disable_port_interrupts(&qcom->ports[i]); +} + +static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom) +{ + int i; + + for (i = 0; i < qcom->num_ports; i++) + dwc3_qcom_enable_port_interrupts(&qcom->ports[i]); } static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) @@ -430,7 +440,8 @@ static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup) * freezable workqueue. */ if (dwc3_qcom_is_host(qcom) && wakeup) { - qcom->usb2_speed = dwc3_qcom_read_usb2_speed(qcom); + for (i = 0; i < qcom->num_ports; i++) + qcom->ports[i].usb2_speed = dwc3_qcom_read_usb2_speed(qcom, i); dwc3_qcom_enable_interrupts(qcom); }