diff mbox series

[v7,4/4] arm64: dts: qcom: aim300: add AIM300 AIoT

Message ID 20240424024508.3857602-5-quic_tengfan@quicinc.com (mailing list archive)
State Superseded
Headers show
Series arm64: qcom: add AIM300 AIoT board support | expand

Commit Message

Tengfei Fan April 24, 2024, 2:45 a.m. UTC
Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe,
I2C functions support.
Here is a diagram of AIM300 AIoT Carrie Board and SoM
 +--------------------------------------------------+
 |             AIM300 AIOT Carrier Board            |
 |                                                  |
 |           +-----------------+                    |
 |power----->| Fixed regulator |---------+          |
 |           +-----------------+         |          |
 |                                       |          |
 |                                       v VPH_PWR  |
 | +----------------------------------------------+ |
 | |                          AIM300 SOM |        | |
 | |                                     |VPH_PWR | |
 | |                                     v        | |
 | |   +-------+       +--------+     +------+    | |
 | |   | UFS   |       | QCS8550|     |PMIC  |    | |
 | |   +-------+       +--------+     +------+    | |
 | |                                              | |
 | +----------------------------------------------+ |
 |                                                  |
 |                    +----+          +------+      |
 |                    |USB |          | UART |      |
 |                    +----+          +------+      |
 +--------------------------------------------------+

Co-developed-by: Qiang Yu <quic_qianyu@quicinc.com>
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Co-developed-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 .../boot/dts/qcom/qcs8550-aim300-aiot.dts     | 343 ++++++++++++++++++
 2 files changed, 344 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts

Comments

Dmitry Baryshkov April 24, 2024, 11:50 p.m. UTC | #1
On Wed, 24 Apr 2024 at 05:46, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
>
> Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe,
> I2C functions support.
> Here is a diagram of AIM300 AIoT Carrie Board and SoM
>  +--------------------------------------------------+
>  |             AIM300 AIOT Carrier Board            |
>  |                                                  |
>  |           +-----------------+                    |
>  |power----->| Fixed regulator |---------+          |
>  |           +-----------------+         |          |
>  |                                       |          |
>  |                                       v VPH_PWR  |
>  | +----------------------------------------------+ |
>  | |                          AIM300 SOM |        | |
>  | |                                     |VPH_PWR | |
>  | |                                     v        | |
>  | |   +-------+       +--------+     +------+    | |
>  | |   | UFS   |       | QCS8550|     |PMIC  |    | |
>  | |   +-------+       +--------+     +------+    | |
>  | |                                              | |
>  | +----------------------------------------------+ |
>  |                                                  |
>  |                    +----+          +------+      |
>  |                    |USB |          | UART |      |
>  |                    +----+          +------+      |
>  +--------------------------------------------------+
>
> Co-developed-by: Qiang Yu <quic_qianyu@quicinc.com>
> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
> Co-developed-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile             |   1 +
>  .../boot/dts/qcom/qcs8550-aim300-aiot.dts     | 343 ++++++++++++++++++
>  2 files changed, 344 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index f63abb43e9fe..c46c10d85697 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_QCOM)       += qcm6490-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += qcs404-evb-1000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += qcs404-evb-4000.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += qcs6490-rb3gen2.dtb
> +dtb-$(CONFIG_ARCH_QCOM)        += qcs8550-aim300-aiot.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += qdu1000-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += qrb2210-rb1.dtb
>  dtb-$(CONFIG_ARCH_QCOM)        += qrb4210-rb2.dtb
> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
> new file mode 100644
> index 000000000000..146bf6ea9e6a
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
> @@ -0,0 +1,343 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/leds/common.h>
> +#include "qcs8550-aim300.dtsi"
> +#include "pm8010.dtsi"
> +#include "pmr735d_a.dtsi"
> +#include "pmr735d_b.dtsi"
> +
> +/ {
> +       model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT";
> +       compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550",
> +                    "qcom,sm8550";
> +
> +       aliases {
> +               serial0 = &uart7;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       gpio-keys {
> +               compatible = "gpio-keys";
> +
> +               pinctrl-0 = <&volume_up_n>;
> +               pinctrl-names = "default";
> +
> +               key-volume-up {
> +                       label = "Volume Up";
> +                       debounce-interval = <15>;
> +                       gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
> +                       linux,code = <KEY_VOLUMEUP>;
> +                       linux,can-disable;
> +                       wakeup-source;
> +               };
> +       };
> +
> +       pmic-glink {
> +               compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
> +               #address-cells = <1>;
> +               #size-cells = <0>;
> +               orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
> +
> +               connector@0 {
> +                       compatible = "usb-c-connector";
> +                       reg = <0>;
> +                       power-role = "dual";
> +                       data-role = "dual";
> +
> +                       ports {
> +                               #address-cells = <1>;
> +                               #size-cells = <0>;
> +
> +                               port@0 {
> +                                       reg = <0>;
> +
> +                                       pmic_glink_hs_in: endpoint {
> +                                               remote-endpoint = <&usb_1_dwc3_hs>;
> +                                       };
> +                               };
> +
> +                               port@1 {
> +                                       reg = <1>;
> +
> +                                       pmic_glink_ss_in: endpoint {
> +                                               remote-endpoint = <&redriver_ss_out>;
> +                                       };
> +                               };
> +
> +                               port@2 {
> +                                       reg = <2>;
> +
> +                                       pmic_glink_sbu: endpoint {
> +                                               remote-endpoint = <&fsa4480_sbu_mux>;
> +                                       };
> +                               };
> +                       };
> +               };
> +       };
> +
> +       vph_pwr: regulator-vph-pwr {
> +               compatible = "regulator-fixed";
> +               regulator-name = "vph_pwr";
> +               regulator-min-microvolt = <3700000>;
> +               regulator-max-microvolt = <3700000>;
> +
> +               regulator-always-on;
> +               regulator-boot-on;
> +       };
> +};
> +
> +&apps_rsc {
> +       regulators-0 {
> +               vdd-bob1-supply = <&vph_pwr>;
> +               vdd-bob2-supply = <&vph_pwr>;
> +       };
> +
> +       regulators-3 {
> +               vdd-s4-supply = <&vph_pwr>;
> +               vdd-s5-supply = <&vph_pwr>;
> +       };
> +
> +       regulators-4 {
> +               vdd-s4-supply = <&vph_pwr>;
> +       };
> +
> +       regulators-5 {
> +               vdd-s1-supply = <&vph_pwr>;
> +               vdd-s2-supply = <&vph_pwr>;
> +               vdd-s3-supply = <&vph_pwr>;
> +               vdd-s4-supply = <&vph_pwr>;
> +               vdd-s5-supply = <&vph_pwr>;
> +               vdd-s6-supply = <&vph_pwr>;
> +       };
> +};
> +
> +&i2c_hub_2 {
> +       status = "okay";
> +
> +       typec-mux@42 {
> +               compatible = "fcs,fsa4480";
> +               reg = <0x42>;
> +
> +               vcc-supply = <&vreg_bob1>;
> +
> +               mode-switch;
> +               orientation-switch;
> +
> +               port {
> +                       fsa4480_sbu_mux: endpoint {
> +                               remote-endpoint = <&pmic_glink_sbu>;
> +                       };
> +               };
> +       };
> +
> +       typec-retimer@1c {
> +               compatible = "onnn,nb7vpq904m";
> +               reg = <0x1c>;
> +
> +               vcc-supply = <&vreg_l15b_1p8>;
> +
> +               orientation-switch;
> +               retimer-switch;
> +
> +               ports {
> +                       #address-cells = <1>;
> +                       #size-cells = <0>;
> +
> +                       port@0 {
> +                               reg = <0>;
> +
> +                               redriver_ss_out: endpoint {
> +                                       remote-endpoint = <&pmic_glink_ss_in>;
> +                               };
> +                       };
> +
> +                       port@1 {
> +                               reg = <1>;
> +
> +                               redriver_ss_in: endpoint {
> +                                       data-lanes = <3 2 1 0>;
> +                                       remote-endpoint = <&usb_dp_qmpphy_out>;
> +                               };
> +                       };
> +               };
> +       };
> +};
> +
> +&mdss_dsi0 {
> +       status = "okay";
> +
> +       panel@0 {
> +               compatible = "visionox,vtdr6130";
> +               reg = <0>;
> +
> +               pinctrl-0 = <&dsi_active>, <&te_active>;
> +               pinctrl-1 = <&dsi_suspend>, <&te_suspend>;
> +               pinctrl-names = "default", "sleep";
> +
> +               reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
> +
> +               vci-supply = <&vreg_l13b_3p0>;
> +               vdd-supply = <&vreg_l11b_1p2>;
> +               vddio-supply = <&vreg_l12b_1p8>;
> +
> +               port {
> +                       panel0_in: endpoint {
> +                               remote-endpoint = <&mdss_dsi0_out>;
> +                       };
> +               };
> +       };
> +};
> +
> +&mdss_dsi0_out {
> +       remote-endpoint = <&panel0_in>;
> +       data-lanes = <0 1 2 3>;
> +};
> +
> +&mdss_dsi0_phy {
> +       status = "okay";
> +};
> +
> +&pcie0 {
> +       pinctrl-0 = <&pcie0_default_state>;
> +       pinctrl-names = "default";
> +
> +       status = "okay";
> +};
> +
> +&pcie0_phy {
> +       status = "okay";
> +};
> +
> +&pcie1 {
> +       pinctrl-0 = <&pcie1_default_state>;
> +       pinctrl-names = "default";
> +
> +       status = "okay";
> +};
> +
> +&pcie1_phy {
> +       status = "okay";
> +};
> +
> +&pm8550_gpios {
> +       volume_up_n: volume-up-n-state {
> +               pins = "gpio6";
> +               function = "normal";
> +               power-source = <1>;
> +               bias-pull-up;
> +               input-enable;
> +       };
> +};
> +
> +&pon_pwrkey {
> +       status = "okay";
> +};
> +
> +&pon_resin {
> +       linux,code = <KEY_VOLUMEDOWN>;
> +
> +       status = "okay";
> +};
> +
> +&qupv3_id_0 {
> +       status = "okay";
> +};
> +
> +&remoteproc_adsp {
> +       firmware-name = "qcom/qcs8550/adsp.mbn",
> +                       "qcom/qcs8550/adsp_dtbs.elf";
> +       status = "okay";
> +};
> +
> +&remoteproc_cdsp {
> +       firmware-name = "qcom/qcs8550/cdsp.mbn",
> +                       "qcom/qcs8550/cdsp_dtbs.elf";
> +       status = "okay";
> +};
> +
> +&swr1 {
> +       status = "okay";
> +};
> +
> +&swr2 {
> +       status = "okay";
> +};
> +
> +&tlmm {
> +       gpio-reserved-ranges = <32 8>;
> +
> +       dsi_active: dsi-active-state {
> +               pins = "gpio133";
> +               function = "gpio";
> +               drive-strength = <8>;
> +               bias-disable;
> +       };
> +
> +       dsi_suspend: dsi-suspend-state {
> +               pins = "gpio133";
> +               function = "gpio";
> +               drive-strength = <2>;
> +               bias-pull-down;
> +       };
> +
> +       te_active: te-active-state {
> +               pins = "gpio86";
> +               function = "mdp_vsync";
> +               drive-strength = <2>;
> +               bias-pull-down;
> +       };
> +
> +       te_suspend: te-suspend-state {
> +               pins = "gpio86";
> +               function = "mdp_vsync";
> +               drive-strength = <2>;
> +               bias-pull-down;
> +       };
> +};
> +
> +&uart7 {
> +       status = "okay";
> +};
> +
> +&usb_1 {
> +       status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> +       dr_mode = "otg";

OTG is default and can be dropped.

> +       usb-role-switch;

Please move to SoC dtsi and drop from board files.

> +};
> +
> +&usb_1_dwc3_hs {
> +       remote-endpoint = <&pmic_glink_hs_in>;
> +};
> +
> +&usb_1_dwc3_ss {
> +       remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;

This too.

> +};
> +
> +&usb_1_hsphy {
> +       status = "okay";
> +};
> +
> +&usb_dp_qmpphy {
> +       orientation-switch;

This too

> +
> +       status = "okay";
> +};
> +
> +&usb_dp_qmpphy_out {
> +       remote-endpoint = <&redriver_ss_in>;
> +};
> +
> +&usb_dp_qmpphy_usb_ss_in {
> +       remote-endpoint = <&usb_1_dwc3_ss>;

And this.

> +};
> --
> 2.25.1
>
Tengfei Fan April 25, 2024, 3:23 a.m. UTC | #2
On 4/25/2024 7:50 AM, Dmitry Baryshkov wrote:
> On Wed, 24 Apr 2024 at 05:46, Tengfei Fan <quic_tengfan@quicinc.com> wrote:
>>
>> Add AIM300 AIoT Carrier board DTS support, including usb, UART, PCIe,
>> I2C functions support.
>> Here is a diagram of AIM300 AIoT Carrie Board and SoM
>>   +--------------------------------------------------+
>>   |             AIM300 AIOT Carrier Board            |
>>   |                                                  |
>>   |           +-----------------+                    |
>>   |power----->| Fixed regulator |---------+          |
>>   |           +-----------------+         |          |
>>   |                                       |          |
>>   |                                       v VPH_PWR  |
>>   | +----------------------------------------------+ |
>>   | |                          AIM300 SOM |        | |
>>   | |                                     |VPH_PWR | |
>>   | |                                     v        | |
>>   | |   +-------+       +--------+     +------+    | |
>>   | |   | UFS   |       | QCS8550|     |PMIC  |    | |
>>   | |   +-------+       +--------+     +------+    | |
>>   | |                                              | |
>>   | +----------------------------------------------+ |
>>   |                                                  |
>>   |                    +----+          +------+      |
>>   |                    |USB |          | UART |      |
>>   |                    +----+          +------+      |
>>   +--------------------------------------------------+
>>
>> Co-developed-by: Qiang Yu <quic_qianyu@quicinc.com>
>> Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
>> Co-developed-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@quicinc.com>
>> Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
>> ---
>>   arch/arm64/boot/dts/qcom/Makefile             |   1 +
>>   .../boot/dts/qcom/qcs8550-aim300-aiot.dts     | 343 ++++++++++++++++++
>>   2 files changed, 344 insertions(+)
>>   create mode 100644 arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index f63abb43e9fe..c46c10d85697 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -96,6 +96,7 @@ dtb-$(CONFIG_ARCH_QCOM)       += qcm6490-idp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qcs404-evb-1000.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qcs404-evb-4000.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qcs6490-rb3gen2.dtb
>> +dtb-$(CONFIG_ARCH_QCOM)        += qcs8550-aim300-aiot.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qdu1000-idp.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qrb2210-rb1.dtb
>>   dtb-$(CONFIG_ARCH_QCOM)        += qrb4210-rb2.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
>> new file mode 100644
>> index 000000000000..146bf6ea9e6a
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
>> @@ -0,0 +1,343 @@
>> +// SPDX-License-Identifier: BSD-3-Clause
>> +/*
>> + * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/leds/common.h>
>> +#include "qcs8550-aim300.dtsi"
>> +#include "pm8010.dtsi"
>> +#include "pmr735d_a.dtsi"
>> +#include "pmr735d_b.dtsi"
>> +
>> +/ {
>> +       model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT";
>> +       compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550",
>> +                    "qcom,sm8550";
>> +
>> +       aliases {
>> +               serial0 = &uart7;
>> +       };
>> +
>> +       chosen {
>> +               stdout-path = "serial0:115200n8";
>> +       };
>> +
>> +       gpio-keys {
>> +               compatible = "gpio-keys";
>> +
>> +               pinctrl-0 = <&volume_up_n>;
>> +               pinctrl-names = "default";
>> +
>> +               key-volume-up {
>> +                       label = "Volume Up";
>> +                       debounce-interval = <15>;
>> +                       gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
>> +                       linux,code = <KEY_VOLUMEUP>;
>> +                       linux,can-disable;
>> +                       wakeup-source;
>> +               };
>> +       };
>> +
>> +       pmic-glink {
>> +               compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
>> +               #address-cells = <1>;
>> +               #size-cells = <0>;
>> +               orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
>> +
>> +               connector@0 {
>> +                       compatible = "usb-c-connector";
>> +                       reg = <0>;
>> +                       power-role = "dual";
>> +                       data-role = "dual";
>> +
>> +                       ports {
>> +                               #address-cells = <1>;
>> +                               #size-cells = <0>;
>> +
>> +                               port@0 {
>> +                                       reg = <0>;
>> +
>> +                                       pmic_glink_hs_in: endpoint {
>> +                                               remote-endpoint = <&usb_1_dwc3_hs>;
>> +                                       };
>> +                               };
>> +
>> +                               port@1 {
>> +                                       reg = <1>;
>> +
>> +                                       pmic_glink_ss_in: endpoint {
>> +                                               remote-endpoint = <&redriver_ss_out>;
>> +                                       };
>> +                               };
>> +
>> +                               port@2 {
>> +                                       reg = <2>;
>> +
>> +                                       pmic_glink_sbu: endpoint {
>> +                                               remote-endpoint = <&fsa4480_sbu_mux>;
>> +                                       };
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +
>> +       vph_pwr: regulator-vph-pwr {
>> +               compatible = "regulator-fixed";
>> +               regulator-name = "vph_pwr";
>> +               regulator-min-microvolt = <3700000>;
>> +               regulator-max-microvolt = <3700000>;
>> +
>> +               regulator-always-on;
>> +               regulator-boot-on;
>> +       };
>> +};
>> +
>> +&apps_rsc {
>> +       regulators-0 {
>> +               vdd-bob1-supply = <&vph_pwr>;
>> +               vdd-bob2-supply = <&vph_pwr>;
>> +       };
>> +
>> +       regulators-3 {
>> +               vdd-s4-supply = <&vph_pwr>;
>> +               vdd-s5-supply = <&vph_pwr>;
>> +       };
>> +
>> +       regulators-4 {
>> +               vdd-s4-supply = <&vph_pwr>;
>> +       };
>> +
>> +       regulators-5 {
>> +               vdd-s1-supply = <&vph_pwr>;
>> +               vdd-s2-supply = <&vph_pwr>;
>> +               vdd-s3-supply = <&vph_pwr>;
>> +               vdd-s4-supply = <&vph_pwr>;
>> +               vdd-s5-supply = <&vph_pwr>;
>> +               vdd-s6-supply = <&vph_pwr>;
>> +       };
>> +};
>> +
>> +&i2c_hub_2 {
>> +       status = "okay";
>> +
>> +       typec-mux@42 {
>> +               compatible = "fcs,fsa4480";
>> +               reg = <0x42>;
>> +
>> +               vcc-supply = <&vreg_bob1>;
>> +
>> +               mode-switch;
>> +               orientation-switch;
>> +
>> +               port {
>> +                       fsa4480_sbu_mux: endpoint {
>> +                               remote-endpoint = <&pmic_glink_sbu>;
>> +                       };
>> +               };
>> +       };
>> +
>> +       typec-retimer@1c {
>> +               compatible = "onnn,nb7vpq904m";
>> +               reg = <0x1c>;
>> +
>> +               vcc-supply = <&vreg_l15b_1p8>;
>> +
>> +               orientation-switch;
>> +               retimer-switch;
>> +
>> +               ports {
>> +                       #address-cells = <1>;
>> +                       #size-cells = <0>;
>> +
>> +                       port@0 {
>> +                               reg = <0>;
>> +
>> +                               redriver_ss_out: endpoint {
>> +                                       remote-endpoint = <&pmic_glink_ss_in>;
>> +                               };
>> +                       };
>> +
>> +                       port@1 {
>> +                               reg = <1>;
>> +
>> +                               redriver_ss_in: endpoint {
>> +                                       data-lanes = <3 2 1 0>;
>> +                                       remote-endpoint = <&usb_dp_qmpphy_out>;
>> +                               };
>> +                       };
>> +               };
>> +       };
>> +};
>> +
>> +&mdss_dsi0 {
>> +       status = "okay";
>> +
>> +       panel@0 {
>> +               compatible = "visionox,vtdr6130";
>> +               reg = <0>;
>> +
>> +               pinctrl-0 = <&dsi_active>, <&te_active>;
>> +               pinctrl-1 = <&dsi_suspend>, <&te_suspend>;
>> +               pinctrl-names = "default", "sleep";
>> +
>> +               reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
>> +
>> +               vci-supply = <&vreg_l13b_3p0>;
>> +               vdd-supply = <&vreg_l11b_1p2>;
>> +               vddio-supply = <&vreg_l12b_1p8>;
>> +
>> +               port {
>> +                       panel0_in: endpoint {
>> +                               remote-endpoint = <&mdss_dsi0_out>;
>> +                       };
>> +               };
>> +       };
>> +};
>> +
>> +&mdss_dsi0_out {
>> +       remote-endpoint = <&panel0_in>;
>> +       data-lanes = <0 1 2 3>;
>> +};
>> +
>> +&mdss_dsi0_phy {
>> +       status = "okay";
>> +};
>> +
>> +&pcie0 {
>> +       pinctrl-0 = <&pcie0_default_state>;
>> +       pinctrl-names = "default";
>> +
>> +       status = "okay";
>> +};
>> +
>> +&pcie0_phy {
>> +       status = "okay";
>> +};
>> +
>> +&pcie1 {
>> +       pinctrl-0 = <&pcie1_default_state>;
>> +       pinctrl-names = "default";
>> +
>> +       status = "okay";
>> +};
>> +
>> +&pcie1_phy {
>> +       status = "okay";
>> +};
>> +
>> +&pm8550_gpios {
>> +       volume_up_n: volume-up-n-state {
>> +               pins = "gpio6";
>> +               function = "normal";
>> +               power-source = <1>;
>> +               bias-pull-up;
>> +               input-enable;
>> +       };
>> +};
>> +
>> +&pon_pwrkey {
>> +       status = "okay";
>> +};
>> +
>> +&pon_resin {
>> +       linux,code = <KEY_VOLUMEDOWN>;
>> +
>> +       status = "okay";
>> +};
>> +
>> +&qupv3_id_0 {
>> +       status = "okay";
>> +};
>> +
>> +&remoteproc_adsp {
>> +       firmware-name = "qcom/qcs8550/adsp.mbn",
>> +                       "qcom/qcs8550/adsp_dtbs.elf";
>> +       status = "okay";
>> +};
>> +
>> +&remoteproc_cdsp {
>> +       firmware-name = "qcom/qcs8550/cdsp.mbn",
>> +                       "qcom/qcs8550/cdsp_dtbs.elf";
>> +       status = "okay";
>> +};
>> +
>> +&swr1 {
>> +       status = "okay";
>> +};
>> +
>> +&swr2 {
>> +       status = "okay";
>> +};
>> +
>> +&tlmm {
>> +       gpio-reserved-ranges = <32 8>;
>> +
>> +       dsi_active: dsi-active-state {
>> +               pins = "gpio133";
>> +               function = "gpio";
>> +               drive-strength = <8>;
>> +               bias-disable;
>> +       };
>> +
>> +       dsi_suspend: dsi-suspend-state {
>> +               pins = "gpio133";
>> +               function = "gpio";
>> +               drive-strength = <2>;
>> +               bias-pull-down;
>> +       };
>> +
>> +       te_active: te-active-state {
>> +               pins = "gpio86";
>> +               function = "mdp_vsync";
>> +               drive-strength = <2>;
>> +               bias-pull-down;
>> +       };
>> +
>> +       te_suspend: te-suspend-state {
>> +               pins = "gpio86";
>> +               function = "mdp_vsync";
>> +               drive-strength = <2>;
>> +               bias-pull-down;
>> +       };
>> +};
>> +
>> +&uart7 {
>> +       status = "okay";
>> +};
>> +
>> +&usb_1 {
>> +       status = "okay";
>> +};
>> +
>> +&usb_1_dwc3 {
>> +       dr_mode = "otg";
> 
> OTG is default and can be dropped.

OTG will be dropped.

> 
>> +       usb-role-switch;
> 
> Please move to SoC dtsi and drop from board files.

This will be moved to SoC dtsi.

> 
>> +};
>> +
>> +&usb_1_dwc3_hs {
>> +       remote-endpoint = <&pmic_glink_hs_in>;
>> +};
>> +
>> +&usb_1_dwc3_ss {
>> +       remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
> 
> This too.

This will be moved to SoC dtsi.

> 
>> +};
>> +
>> +&usb_1_hsphy {
>> +       status = "okay";
>> +};
>> +
>> +&usb_dp_qmpphy {
>> +       orientation-switch;
> 
> This too

This will be moved to SoC dtsi.

> 
>> +
>> +       status = "okay";
>> +};
>> +
>> +&usb_dp_qmpphy_out {
>> +       remote-endpoint = <&redriver_ss_in>;
>> +};
>> +
>> +&usb_dp_qmpphy_usb_ss_in {
>> +       remote-endpoint = <&usb_1_dwc3_ss>;
> 
> And this.

This will be moved to SoC dtsi.

> 
>> +};
>> --
>> 2.25.1
>>
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f63abb43e9fe..c46c10d85697 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -96,6 +96,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb2210-rb1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb4210-rb2.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
new file mode 100644
index 000000000000..146bf6ea9e6a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs8550-aim300-aiot.dts
@@ -0,0 +1,343 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023-2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "qcs8550-aim300.dtsi"
+#include "pm8010.dtsi"
+#include "pmr735d_a.dtsi"
+#include "pmr735d_b.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. QCS8550 AIM300 AIOT";
+	compatible = "qcom,qcs8550-aim300-aiot", "qcom,qcs8550-aim300", "qcom,qcs8550",
+		     "qcom,sm8550";
+
+	aliases {
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&volume_up_n>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			debounce-interval = <15>;
+			gpios = <&pm8550_gpios 6 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,sm8550-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 11 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&redriver_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+						remote-endpoint = <&fsa4480_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+	};
+
+	regulators-3 {
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+	};
+
+	regulators-4 {
+		vdd-s4-supply = <&vph_pwr>;
+	};
+
+	regulators-5 {
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+	};
+};
+
+&i2c_hub_2 {
+	status = "okay";
+
+	typec-mux@42 {
+		compatible = "fcs,fsa4480";
+		reg = <0x42>;
+
+		vcc-supply = <&vreg_bob1>;
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			fsa4480_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu>;
+			};
+		};
+	};
+
+	typec-retimer@1c {
+		compatible = "onnn,nb7vpq904m";
+		reg = <0x1c>;
+
+		vcc-supply = <&vreg_l15b_1p8>;
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				redriver_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				redriver_ss_in: endpoint {
+					data-lanes = <3 2 1 0>;
+					remote-endpoint = <&usb_dp_qmpphy_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dsi0 {
+	status = "okay";
+
+	panel@0 {
+		compatible = "visionox,vtdr6130";
+		reg = <0>;
+
+		pinctrl-0 = <&dsi_active>, <&te_active>;
+		pinctrl-1 = <&dsi_suspend>, <&te_suspend>;
+		pinctrl-names = "default", "sleep";
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+
+		vci-supply = <&vreg_l13b_3p0>;
+		vdd-supply = <&vreg_l11b_1p2>;
+		vddio-supply = <&vreg_l12b_1p8>;
+
+		port {
+			panel0_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	status = "okay";
+};
+
+&pcie1 {
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	status = "okay";
+};
+
+&pm8550_gpios {
+	volume_up_n: volume-up-n-state {
+		pins = "gpio6";
+		function = "normal";
+		power-source = <1>;
+		bias-pull-up;
+		input-enable;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8550/adsp.mbn",
+			"qcom/qcs8550/adsp_dtbs.elf";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8550/cdsp.mbn",
+			"qcom/qcs8550/cdsp_dtbs.elf";
+	status = "okay";
+};
+
+&swr1 {
+	status = "okay";
+};
+
+&swr2 {
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <32 8>;
+
+	dsi_active: dsi-active-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-disable;
+	};
+
+	dsi_suspend: dsi-suspend-state {
+		pins = "gpio133";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	te_active: te-active-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+
+	te_suspend: te-suspend-state {
+		pins = "gpio86";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_dwc3_ss {
+	remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+};
+
+&usb_1_hsphy {
+	status = "okay";
+};
+
+&usb_dp_qmpphy {
+	orientation-switch;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&redriver_ss_in>;
+};
+
+&usb_dp_qmpphy_usb_ss_in {
+	remote-endpoint = <&usb_1_dwc3_ss>;
+};