diff mbox series

[v2] arm64: dts: qcom: qcm6490-rb3: Enable gpi-dma and qup node

Message ID 20240424054602.5731-1-quic_vdadhani@quicinc.com (mailing list archive)
State Queued
Headers show
Series [v2] arm64: dts: qcom: qcm6490-rb3: Enable gpi-dma and qup node | expand

Commit Message

Viken Dadhaniya April 24, 2024, 5:46 a.m. UTC
Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
buses usecase on RB3gen2.

Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
---

v1 -> v2:
- Move gpi node to correct place.
- Update commit log.
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Comments

Dmitry Baryshkov April 24, 2024, 7:42 a.m. UTC | #1
On Wed, 24 Apr 2024 at 08:46, Viken Dadhaniya <quic_vdadhani@quicinc.com> wrote:
>
> Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
> buses usecase on RB3gen2.
>
> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
> ---
>
> v1 -> v2:
> - Move gpi node to correct place.
> - Update commit log.
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 12 ++++++++++++
>  1 file changed, 12 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Bjorn Andersson May 27, 2024, 3 a.m. UTC | #2
On Wed, 24 Apr 2024 11:16:02 +0530, Viken Dadhaniya wrote:
> Enable gpi-dma0, gpi-dma1 and qupv3_id_1 nodes for
> buses usecase on RB3gen2.
> 
> 

Applied, thanks!

[1/1] arm64: dts: qcom: qcm6490-rb3: Enable gpi-dma and qup node
      commit: fbc7a70b2c1b03eab1ba4a0d611867a2de23d142

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index a085ff5b5fb2..577bf8560d1e 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -530,6 +530,14 @@ 
 			   <GCC_WPSS_RSCP_CLK>;
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
 &i2c1 {
 	status = "okay";
 
@@ -606,6 +614,10 @@ 
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/qcs6490/adsp.mbn";
 	status = "okay";