diff mbox series

[06/13] mfd: pm8008: rename irq chip

Message ID 20240506150830.23709-7-johan+linaro@kernel.org (mailing list archive)
State Not Applicable
Headers show
Series arm64: dts: qcom: sc8280xp-x13s: enable pm8008 camera pmic | expand

Commit Message

Johan Hovold May 6, 2024, 3:08 p.m. UTC 
Drop the redundant "irq" suffix from the irq chip name.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 drivers/mfd/qcom-pm8008.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Bryan O'Donoghue May 8, 2024, 5:38 p.m. UTC | #1 
On 06/05/2024 16:08, Johan Hovold wrote:
> Drop the redundant "irq" suffix from the irq chip name.
> 
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---
>   drivers/mfd/qcom-pm8008.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
> index f1c68b3da1b6..a04bae52a49a 100644
> --- a/drivers/mfd/qcom-pm8008.c
> +++ b/drivers/mfd/qcom-pm8008.c
> @@ -132,7 +132,7 @@ static int pm8008_set_type_config(unsigned int **buf, unsigned int type,
>   }
>   
>   static const struct regmap_irq_chip pm8008_irq_chip = {
> -	.name			= "pm8008_irq",
> +	.name			= "pm8008",
>   	.main_status		= I2C_INTR_STATUS_BASE,
>   	.num_main_regs		= 1,
>   	.irqs			= pm8008_irqs,

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Stephen Boyd May 8, 2024, 10:04 p.m. UTC | #2 
Quoting Johan Hovold (2024-05-06 08:08:23)
> Drop the redundant "irq" suffix from the irq chip name.
>
> Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
> ---

Reviewed-by: Stephen Boyd <swboyd@chromium.org>
diff mbox series

Patch

diff --git a/drivers/mfd/qcom-pm8008.c b/drivers/mfd/qcom-pm8008.c
index f1c68b3da1b6..a04bae52a49a 100644
--- a/drivers/mfd/qcom-pm8008.c
+++ b/drivers/mfd/qcom-pm8008.c
@@ -132,7 +132,7 @@  static int pm8008_set_type_config(unsigned int **buf, unsigned int type,
 }
 
 static const struct regmap_irq_chip pm8008_irq_chip = {
-	.name			= "pm8008_irq",
+	.name			= "pm8008",
 	.main_status		= I2C_INTR_STATUS_BASE,
 	.num_main_regs		= 1,
 	.irqs			= pm8008_irqs,