diff mbox series

[v2,6/7] arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset

Message ID 20240507144821.12275-7-johan+linaro@kernel.org (mailing list archive)
State Accepted
Commit 9c8488b0f257a82962de3ef6e5981cf01a40486e
Headers show
Series HID/arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on | expand

Commit Message

Johan Hovold May 7, 2024, 2:48 p.m. UTC
The touch controller reset line is currently not described by the
devicetree except in the pin configuration which is used to deassert
reset.

As the reset line has an external pull up to an always-on rail there is
no need to drive the pin high so just leave it configured as an input
and disable the internal pull down.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 41215567b3ae..372b35fb844f 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -977,8 +977,7 @@  int-n-pins {
 		reset-n-pins {
 			pins = "gpio99";
 			function = "gpio";
-			output-high;
-			drive-strength = <16>;
+			bias-disable;
 		};
 	};