@@ -2140,9 +2140,10 @@ static struct clk_rcg2 pcnoc_bfdcd_clk_src = {
static struct clk_branch gcc_crypto_axi_clk = {
.halt_reg = 0x16010,
+ .halt_check = BRANCH_HALT_VOTED,
.clkr = {
- .enable_reg = 0x16010,
- .enable_mask = BIT(0),
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(15),
.hw.init = &(const struct clk_init_data) {
.name = "gcc_crypto_axi_clk",
.parent_hws = (const struct clk_hw *[]) {
@@ -2156,9 +2157,10 @@ static struct clk_branch gcc_crypto_axi_clk = {
static struct clk_branch gcc_crypto_ahb_clk = {
.halt_reg = 0x16014,
+ .halt_check = BRANCH_HALT_VOTED,
.clkr = {
- .enable_reg = 0x16014,
- .enable_mask = BIT(0),
+ .enable_reg = 0xb004,
+ .enable_mask = BIT(16),
.hw.init = &(const struct clk_init_data) {
.name = "gcc_crypto_ahb_clk",
.parent_hws = (const struct clk_hw *[]) {
The crypto_ahb and crypto_axi clks are hardware voteable. This means that the halt bit isn't reliable because some other voter in the system, e.g. TrustZone, could be keeping the clk enabled when the kernel turns it off from clk_disable(). Make these clks use voting mode by changing the halt check to BRANCH_HALT_VOTED and toggle the voting bit in the voting register instead of directly controlling the branch by writing to the branch register. This fixes stuck clk warnings seen on ipq9574 and saves power by actually turning the clk off. Also changes the CRYPTO_AHB_CLK_ENA & CRYPTO_AXI_CLK_ENA offset to 0xb004 from 0x16014. Cc: stable@vger.kernel.org Fixes: f6b2bd9cb29a ("clk: qcom: gcc-ipq9574: Enable crypto clocks") Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com> --- Change in [v3] * Updated commit message Change in [v2] * Added Fixes tag and stable kernel tag * updated commit message about offset change drivers/clk/qcom/gcc-ipq9574.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)