@@ -24,6 +24,7 @@
#include <dt-bindings/power/qcom-rpmpd.h>
#include <dt-bindings/reset/qcom,sdm845-aoss.h>
#include <dt-bindings/reset/qcom,sdm845-pdc.h>
+#include <dt-bindings/soc/qcom,apr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,lpass.h>
#include <dt-bindings/thermal/thermal.h>
@@ -3762,6 +3763,75 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
label = "lpass";
qcom,remote-pid = <2>;
+ apr {
+ compatible = "qcom,apr-v2";
+ qcom,glink-channels = "apr_audio_svc";
+ qcom,domain = <APR_DOMAIN_ADSP>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ service@3 {
+ reg = <APR_SVC_ADSP_CORE>;
+ compatible = "qcom,q6core";
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+ };
+
+ q6afe: service@4 {
+ compatible = "qcom,q6afe";
+ reg = <APR_SVC_AFE>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6afedai: dais {
+ compatible = "qcom,q6afe-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ };
+
+ q6afecc: clock-controller {
+ compatible = "qcom,q6afe-clocks";
+ #clock-cells = <2>;
+ };
+ };
+
+ q6asm: service@7 {
+ compatible = "qcom,q6asm";
+ reg = <APR_SVC_ASM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6asmdai: dais {
+ compatible = "qcom,q6asm-dais";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #sound-dai-cells = <1>;
+ iommus = <&apps_smmu 0x1801 0x0>;
+
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+ };
+ };
+
+ q6adm: service@8 {
+ compatible = "qcom,q6adm";
+ reg = <APR_SVC_ADM>;
+ qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+ q6routing: routing {
+ compatible = "qcom,q6adm-routing";
+ #sound-dai-cells = <0>;
+ };
+ };
+ };
+
fastrpc {
compatible = "qcom,fastrpc";
qcom,glink-channels = "fastrpcglink-apps-dsp";
@@ -5991,6 +6061,9 @@ cpufreq_hw: cpufreq@18591000 {
};
};
+ sound: sound {
+ };
+
thermal_zones: thermal-zones {
cpu0-thermal {
polling-delay-passive = <250>;
Add the different services found on APR on some devices with SC7280 SoC. Additionally add an empty sound node in the root node as is seen on other SoC dtsi files so device dt's can easily use that. Signed-off-by: Luca Weiss <luca.weiss@fairphone.com> --- arch/arm64/boot/dts/qcom/sc7280.dtsi | 73 ++++++++++++++++++++++++++++++++++++ 1 file changed, 73 insertions(+)