From patchwork Thu May 30 13:57:42 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Alexander Reimelt X-Patchwork-Id: 13680455 Received: from mout01.posteo.de (mout01.posteo.de [185.67.36.65]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id A0B6A186E40 for ; Thu, 30 May 2024 14:00:00 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.67.36.65 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1717077602; cv=none; b=kQnFeQWsHFicKO4gmfEOwHf7zv4nfIdI+cbNWH4yFvitC9gCsOxy9iYyMtOZDgY6fN7GXA/Cd/bXpD3Ki7fpg8FRQRl3u81bWI+ZiZw7c/1IV+n9Tpj2Qox0HkKH46JTkXiSMrZ7XWAn7/GvqcuBDKgiV3BBBMDXUpC5bWmuo0k= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1717077602; c=relaxed/simple; bh=Nu+pWteWMgH/QEwoWCbIFqPC/H4vkxZKSBzcueZdV10=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=YdlUq9fEuqBEzTHU22j8bqi5EifLJywosMQ1jL2ZAbsD38hXd9/kUrcda8LmIKVdqRjO/88/7SwZ6ZUrsAelLGfi1m92I/r/hf4il2gqQxa2v+LX+egSxT0lq4MM2/LnrDKJEKz8HmCEmzrnRB2UcCS0ixK1WZiHd5kwcDkZFlI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=posteo.de; spf=pass smtp.mailfrom=posteo.de; dkim=pass (2048-bit key) header.d=posteo.de header.i=@posteo.de header.b=pa02Lxj+; arc=none smtp.client-ip=185.67.36.65 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=posteo.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=posteo.de Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=posteo.de header.i=@posteo.de header.b="pa02Lxj+" Received: from submission (posteo.de [185.67.36.169]) by mout01.posteo.de (Postfix) with ESMTPS id 8C6C324002B for ; Thu, 30 May 2024 15:59:52 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=posteo.de; s=2017; t=1717077592; bh=Nu+pWteWMgH/QEwoWCbIFqPC/H4vkxZKSBzcueZdV10=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version: Content-Transfer-Encoding:Autocrypt:OpenPGP:From; b=pa02Lxj+yzDjgdn1wmtFu9GJP6CKpjDMXU2HJfqMtU2yhEieXy4K+vF3Ohh2Sxb2K +cC0v2krsqfYMYyvGvHisOKi1IlhpaXskYSWdpa/LFGDRFXRvN3bRHrY6zofl2sDQ6 isG5avjVWLgwgbmQHlrOgjm52B6nHAeJDtsm+qxmVZJgs1V0EHKACzh0WG+bAJdvvT 4ZA/m+4E4YzHOljIxSn7cS9exKWXIN5k1OUaW4cAJNiAbnTUjCy1rqNXRAqcEr6963 +jOLqtaz4zXudjKWkjrOZXPlJxoH9v645xt56ETPsXa/U9U963HbrF/IG6SnsxD0MG Bpo9E8RPZc44A== Received: from customer (localhost [127.0.0.1]) by submission (posteo.de) with ESMTPSA id 4Vqntv2gpxz9rxS; Thu, 30 May 2024 15:59:51 +0200 (CEST) From: Alexander Reimelt To: andersson@kernel.org, petr.vorel@gmail.com, konrad.dybcio@linaro.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/2] arm64: dts: qcom: msm8992-lg-h815: Initial support for LG G4 (H815) Date: Thu, 30 May 2024 13:57:42 +0000 Message-ID: <20240530135922.23326-3-alexander.reimelt@posteo.de> In-Reply-To: <20240530135922.23326-1-alexander.reimelt@posteo.de> References: <20240403104415.30636-1-alexander.reimelt@posteo.de> <20240530135922.23326-1-alexander.reimelt@posteo.de> Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Autocrypt: addr=alexander.reimelt@posteo.de; keydata=xjMEZg0fSRYJKwYBBAHaRw8BAQdAIcaNTdj3NWDe5HQPCUs6oYyQygAJWP9LCzhr+C7RwMrNG2Fs ZXhhbmRlci5yZWltZWx0QHBvc3Rlby5kZcKZBBMWCgBBFiEEM+Wy6sI/mP5S0zIFHqi3OKk8uRIF AmYNH0kCGwMFCQWjo9cFCwkIBwICIgIGFQoJCAsCBBYCAwECHgcCF4AACgkQHqi3OKk8uRJ8ogD9 EVg4zgfmC2SqXCgms6LETAzVX4CrAS8yMhyd7Md921cA/R8lhm9B96RYgA7MvFPFJb1T6JFY75Jg QLXrtIE5llwHzjgEZg0fSRIKKwYBBAGXVQEFAQEHQBGDuxZLOTvppxyM4G18fSR6xzT0xkkPOia7 Bh6L1vAAAwEIB8J+BBgWCgAmFiEEM+Wy6sI/mP5S0zIFHqi3OKk8uRIFAmYNH0kCGwwFCQWjo9cA CgkQHqi3OKk8uRIa1wD8CZDdCAKXstgXY96eeSSP7MecEF5TBdmWOiVgjlEIpoEA/RnGuDaj06B1 F51wyGAjYXSmn5qFoNHu3yXyLUkFz1ME OpenPGP: url=https://posteo.de/keys/alexander.reimelt@posteo.de.asc To make it easier for downstream projects and avoid duplication of work. Makes the device bootable and enables all buttons, hall sensor, eMMC and SD-Card. Signed-off-by: Alexander Reimelt --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts | 234 +++++++++++++++++++ 2 files changed, 235 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 7d40ec5e7d21..5b7f8741006f 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -62,6 +62,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-h815.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8994-huawei-angler-rev-101.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts new file mode 100644 index 000000000000..5f55abec82aa --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts @@ -0,0 +1,234 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +/* + * MSM8992 LG G4 (h815) device tree. + * + * Copyright (c) 2024, Alexander Reimelt + */ + +/dts-v1/; + +#include "msm8992.dtsi" +#include "pm8994.dtsi" +#include "pmi8994.dtsi" +#include + +/* different mapping */ +/delete-node/ &cont_splash_mem; + +/* disabled downstream */ +/delete-node/ &dfps_data_mem; + +/ { + model = "LG G4 (H815)"; + compatible = "lg,h815", "qcom,msm8992"; + chassis-type = "handset"; + + qcom,msm-id = <251 0>; + qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>; + qcom,board-id = <0xb64 0>; + + /* psci is broken */ + /delete-node/ psci; + + chosen {}; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + spin-table@6000000 { + reg = <0 0x6000000 0 0x1000>; + no-map; + }; + + ramoops@ff00000 { + compatible = "ramoops"; + reg = <0x0 0xff00000 0x0 0x100000>; + console-size = <0x20000>; + pmsg-size = <0x20000>; + record-size = <0x10000>; + ecc-size = <0x10>; + }; + + cont_splash_mem: fb@3400000 { + compatible = "framebuffer"; + reg = <0 0x3400000 0 0xc00000>; + no-map; + }; + + crash_fb_mem: crash-fb@4000000 { + reg = <0 0x4000000 0 0xc00000>; + no-map; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&hall_sensor_default>; + pinctrl-names = "default"; + + label = "Hall Effect Sensor"; + + event-hall-sensor { + gpios = <&tlmm 75 GPIO_ACTIVE_LOW>; + label = "hall effect sensor"; + linux,input-type = ; + linux,code = ; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-vol-up { + label = "volume up"; + gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <15>; + }; + }; +}; + +&CPU0 { + enable-method = "spin-table"; +}; + +&CPU1 { + enable-method = "spin-table"; +}; + +&CPU2 { + enable-method = "spin-table"; +}; + +&CPU3 { + enable-method = "spin-table"; +}; + +&CPU4 { + enable-method = "spin-table"; +}; + +&CPU5 { + enable-method = "spin-table"; +}; + +&pm8994_resin { + linux,code = ; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8994-regulators"; + + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pmi8994_s1>; + vdd_l2_26_28-supply = <&pm8994_s3>; + vdd_l3_11-supply = <&pm8994_s3>; + vdd_l4_27_31-supply = <&pm8994_s3>; + vdd_l5_7-supply = <&pm8994_s5>; + vdd_l6_12_32-supply = <&pm8994_s5>; + vdd_l8_16_30-supply = <&vph_pwr>; + vdd_l9_10_18_22-supply = <&pmi8994_bby>; + vdd_l13_19_23_24-supply = <&pmi8994_bby>; + vdd_l14_15-supply = <&pm8994_s5>; + vdd_l17_29-supply = <&pmi8994_bby>; + vdd_l20_21-supply = <&pmi8994_bby>; + vdd_l25-supply = <&pm8994_s5>; + vdd_lvs1_2-supply = <&pm8994_s4>; + + pm8994_s3: s3 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + /* sdhc1 vqmmc and bcm */ + pm8994_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-system-load = <325000>; + regulator-allow-set-load; + }; + + pm8994_s5: s5 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + /* sdhc2 vqmmc */ + pm8994_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <22000>; + regulator-allow-set-load; + }; + + /* sdhc1 vmmc */ + pm8994_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <570000>; + regulator-allow-set-load; + }; + + /* sdhc2 vmmc */ + pm8994_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <800000>; + regulator-allow-set-load; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pmi8994-regulators"; + + vdd_s1-supply = <&vph_pwr>; + vdd_bst_byp-supply = <&vph_pwr>; + + pmi8994_s1: s1 { + regulator-min-microvolt = <1025000>; + regulator-max-microvolt = <1025000>; + }; + + /* S2 & S3 - VDD_GFX */ + + pmi8994_bby: boost-bypass { + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3600000>; + }; + }; +}; + +&sdhc1 { + mmc-hs400-1_8v; + vmmc-supply = <&pm8994_l20>; + vqmmc-supply = <&pm8994_s4>; + non-removable; + status = "okay"; +}; + +&sdhc2 { + vmmc-supply = <&pm8994_l21>; + vqmmc-supply = <&pm8994_l13>; + cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&tlmm { + hall_sensor_default: hall-sensor-default-state { + pins = "gpio75"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; +};