diff mbox series

[v23,17/32] ALSA: usb-audio: Do not allow USB offload path if PCM device is in use

Message ID 20240610235808.22173-18-quic_wcheng@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Introduce QC USB SND audio offloading support | expand

Commit Message

Wesley Cheng June 10, 2024, 11:57 p.m. UTC
Add proper checks and updates to the USB substream once receiving a USB QMI
stream enable request.  If the substream is already in use from the non
offload path, reject the stream enable request.  In addition, update the
USB substream opened parameter when enabling the offload path, so the
non offload path can be blocked.

Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
---
 sound/usb/qcom/qc_audio_offload.c | 15 ++++++++++++++-
 1 file changed, 14 insertions(+), 1 deletion(-)

Comments

Amadeusz Sławiński June 12, 2024, 2:57 p.m. UTC | #1
On 6/11/2024 1:57 AM, Wesley Cheng wrote:
> Add proper checks and updates to the USB substream once receiving a USB QMI
> stream enable request.  If the substream is already in use from the non
> offload path, reject the stream enable request.  In addition, update the
> USB substream opened parameter when enabling the offload path, so the
> non offload path can be blocked.
> 
> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
> ---
>   sound/usb/qcom/qc_audio_offload.c | 15 ++++++++++++++-
>   1 file changed, 14 insertions(+), 1 deletion(-)

Patch title is missing qcom part and it clearly touches QCOM code.
ALSA: usb-audio: qcom:
diff mbox series

Patch

diff --git a/sound/usb/qcom/qc_audio_offload.c b/sound/usb/qcom/qc_audio_offload.c
index eda16d6df0d7..648b97aeae1d 100644
--- a/sound/usb/qcom/qc_audio_offload.c
+++ b/sound/usb/qcom/qc_audio_offload.c
@@ -1460,12 +1460,17 @@  static void handle_uaudio_stream_req(struct qmi_handle *handle,
 		goto response;
 	}
 
+	mutex_lock(&chip->mutex);
 	if (req_msg->enable) {
-		if (info_idx < 0 || chip->system_suspend) {
+		if (info_idx < 0 || chip->system_suspend || subs->opened) {
 			ret = -EBUSY;
+			mutex_unlock(&chip->mutex);
+
 			goto response;
 		}
+		subs->opened = 1;
 	}
+	mutex_unlock(&chip->mutex);
 
 	if (req_msg->service_interval_valid) {
 		ret = get_data_interval_from_si(subs,
@@ -1487,6 +1492,11 @@  static void handle_uaudio_stream_req(struct qmi_handle *handle,
 		if (!ret)
 			ret = prepare_qmi_response(subs, req_msg, &resp,
 					info_idx);
+		if (ret < 0) {
+			mutex_lock(&chip->mutex);
+			subs->opened = 0;
+			mutex_unlock(&chip->mutex);
+		}
 	} else {
 		info = &uadev[pcm_card_num].info[info_idx];
 		if (info->data_ep_pipe) {
@@ -1510,6 +1520,9 @@  static void handle_uaudio_stream_req(struct qmi_handle *handle,
 		}
 
 		disable_audio_stream(subs);
+		mutex_lock(&chip->mutex);
+		subs->opened = 0;
+		mutex_unlock(&chip->mutex);
 	}
 
 response: