| Message ID | 20240612183031.219906-2-quic_sibis@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | firmware: arm_scmi: vendors: Qualcomm Vendor Protocol | expand |
On Thu, Jun 13, 2024 at 12:00:28AM +0530, Sibi Sankar wrote: > Document the SCMI QCOM Vendor protocol v1.0 bindings and the various memory > buses that can be monitored and scaled by memory latency governor hosted > on it. > > Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> > --- > > v1: > * Add missing bindings for the protocol. [Konrad/Dmitry] > * Use alternate bindings. [Dmitry/Konrad] > > .../bindings/firmware/arm,scmi.yaml | 21 ++ > .../bindings/soc/qcom/qcom,scmi-memlat.yaml | 243 ++++++++++++++++++ > include/dt-bindings/soc/qcom,scmi-vendor.h | 22 ++ > 3 files changed, 286 insertions(+) > create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml > create mode 100644 include/dt-bindings/soc/qcom,scmi-vendor.h > > diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml > index 7de2c29606e5..21e4da53d02c 100644 > --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml > +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml > @@ -278,6 +278,27 @@ properties: > required: > - reg > > + protocol@80: > + $ref: '#/$defs/protocol-node' > + unevaluatedProperties: false > + > + properties: > + reg: > + const: 0x80 > + > + memlat-dvfs: I don't see the purpose of this container node. > + type: object > + additionalProperties: false > + description: > + The list of all memory buses that can be monitored and scaled by the > + memory latency governor running on the SCMI controller. > + > + patternProperties: > + '^memory-[0-9]$': > + type: object > + $ref: /schemas/soc/qcom/qcom,scmi-memlat.yaml# This schema needs to be at the level of the protocol node. See the i.MX SCMI pinctrl patches for more details on what it should look like. > + unevaluatedProperties: false > + > additionalProperties: false > > $defs: > diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml > new file mode 100644 > index 000000000000..c6e3d163c4a3 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml > @@ -0,0 +1,243 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/qcom/qcom,scmi-memlat.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm SCMI Memory Bus nodes > + > +maintainers: > + - Sibi Sankar <quic_sibis@quicinc.com> > + > +description: | Doesn't need '|' if no formatting. > + This binding describes the various memory buses that can be monitored and scaled > + by memory latency governor running on the CPU Control Processor (SCMI controller). > + > +properties: > + qcom,memory-type: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [0, 1, 2] > + description: Needs a '|' if you want your formatting preserved. > + Memory Bus Identifier > + 0 = QCOM_MEM_TYPE_DDR > + 1 = QCOM_MEM_TYPE_LLCC > + 2 = QCOM_MEM_TYPE_DDR_QOS > + > + freq-table-hz: > + items: > + items: > + - description: Minimum frequency of the memory bus in Hz > + - description: Maximum frequency of the memory bus in Hz > + > +patternProperties: > + '^monitor-[0-9]$': > + type: object > + unevaluatedProperties: false > + description: > + The list of all monitors detecting the memory latency bound workloads using > + various counters. > + > + properties: > + qcom,compute-type: > + description: > + Monitors of type compute perform bus dvfs based on a rudimentary CPU > + frequency to memory frequency map. > + type: boolean > + > + qcom,ipm-ceil: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Monitors having this property perform bus dvfs based on the same > + rudimentary table but the scaling is performed only if the calculated > + IPM (Instruction Per Misses) exceeds the given ceiling. > + > + qcom,cpulist: > + $ref: /schemas/types.yaml#/definitions/phandle-array > + description: > + List of phandles to the CPUs nodes whose frequency and IPM are to be > + monitored. We have a standard property for this: cpus > + > + operating-points-v2: true > + opp-table: > + type: object > + > + required: > + - qcom,cpulist > + - operating-points-v2 > + - opp-table > + > + allOf: > + - if: > + properties: > + qcom,compute-type: false > + then: > + required: > + - qcom,ipm-ceil > + > + - if: > + properties: > + qcom,ipm-ceil: false > + then: > + required: > + - qcom,compute-type Isn't all this just: oneOf: - required: [ qcom,compute-type ] - required: [ qcom,ipm-ceil ] > + > +required: > + - qcom,memory-type > + - freq-table-hz > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/soc/qcom,scmi-vendor.h> > + > + firmware { > + scmi { > + compatible = "arm,scmi"; > + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; > + mbox-names = "tx", "rx"; > + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; > + > + #address-cells = <1>; > + #size-cells = <0>; > + > + protocol@80 { > + reg = <0x80>; > + > + memlat-dvfs { > + memory-0 { > + qcom,memory-type = <QCOM_MEM_TYPE_DDR>; > + freq-table-hz = /bits/ 64 <200000000 4224000000>; > + > + monitor-0 { > + qcom,ipm-ceil = <20000000>; > + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 > + &CPU8 &CPU9 &CPU10 &CPU11>; > + operating-points-v2 = <&memory0_monitor0_opp_table>; > + > + memory0_monitor0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-999000000 { > + opp-hz = /bits/ 64 <999000000 547000000>; > + }; > + > + opp-1440000000 { > + opp-hz = /bits/ 64 <1440000000 768000000>; > + }; > + > + opp-1671000000 { > + opp-hz = /bits/ 64 <1671000000 1555000000>; > + }; > + > + opp-2189000000 { > + opp-hz = /bits/ 64 <2189000000 2092000000>; > + }; > + > + opp-2516000000 { > + opp-hz = /bits/ 64 <2516000000 3187000000>; > + }; > + > + opp-3860000000 { > + opp-hz = /bits/ 64 <3860000000 4224000000>; > + }; > + }; > + }; > + > + monitor-1 { > + qcom,compute-type; > + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 > + &CPU8 &CPU9 &CPU10 &CPU11>; > + operating-points-v2 = <&memory0_monitor1_opp_table>; > + > + memory0_monitor1_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-1440000000 { > + opp-hz = /bits/ 64 <1440000000 200000000>; > + }; > + > + opp-2189000000 { > + opp-hz = /bits/ 64 <2189000000 768000000>; > + }; > + > + opp-2516000000 { > + opp-hz = /bits/ 64 <2516000000 1555000000>; > + }; > + > + opp-3860000000 { > + opp-hz = /bits/ 64 <3860000000 4224000000>; > + }; > + }; > + }; > + }; > + > + memory-1 { > + qcom,memory-type = <QCOM_MEM_TYPE_LLCC>; > + freq-table-hz = /bits/ 64 <300000000 1067000000>; > + > + monitor-0 { > + qcom,ipm-ceil = <20000000>; > + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 > + &CPU8 &CPU9 &CPU10 &CPU11>; > + operating-points-v2 = <&memory1_monitor0_opp_table>; > + > + memory1_monitor0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-999000000 { > + opp-hz = /bits/ 64 <999000000 300000000>; > + }; > + > + opp-1440000000 { > + opp-hz = /bits/ 64 <1440000000 466000000>; > + }; > + > + opp-1671000000 { > + opp-hz = /bits/ 64 <1671000000 600000000>; > + }; > + > + opp-2189000000 { > + opp-hz = /bits/ 64 <2189000000 806000000>; > + }; > + > + opp-2516000000 { > + opp-hz = /bits/ 64 <2516000000 933000000>; > + }; > + > + opp-3860000000 { > + opp-hz = /bits/ 64 <3860000000 1066000000>; > + }; > + }; > + }; > + }; > + > + memory-2 { > + qcom,memory-type = <QCOM_MEM_TYPE_DDR_QOS>; > + freq-table-hz = /bits/ 64 <QCOM_DDR_LEVEL_AUTO QCOM_DDR_LEVEL_PERF>; > + > + monitor-0 { > + qcom,ipm-ceil = <20000000>; > + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 > + &CPU8 &CPU9 &CPU10 &CPU11>; > + operating-points-v2 = <&memory2_monitor0_opp_table>; > + > + memory2_monitor0_opp_table: opp-table { > + compatible = "operating-points-v2"; > + > + opp-2189000000 { > + opp-hz = /bits/ 64 <2189000000>; > + opp-level = <QCOM_DDR_LEVEL_AUTO>; > + }; > + > + opp-3860000000 { > + opp-hz = /bits/ 64 <3860000000>; > + opp-level = <QCOM_DDR_LEVEL_PERF>; > + }; > + }; > + }; > + }; > + }; > + }; > + }; > + }; > diff --git a/include/dt-bindings/soc/qcom,scmi-vendor.h b/include/dt-bindings/soc/qcom,scmi-vendor.h > new file mode 100644 > index 000000000000..7ae8d8d5623b > --- /dev/null > +++ b/include/dt-bindings/soc/qcom,scmi-vendor.h > @@ -0,0 +1,22 @@ > +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ > +/* > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > +#ifndef __DT_BINDINGS_QCOM_SCMI_VENDOR_H > +#define __DT_BINDINGS_QCOM_SCMI_VENDOR > + > +/* Memory IDs */ > +#define QCOM_MEM_TYPE_DDR 0x0 > +#define QCOM_MEM_TYPE_LLCC 0x1 > +#define QCOM_MEM_TYPE_DDR_QOS 0x2 > + > +/* > + * QCOM_MEM_TYPE_DDR_QOS supports the following states. > + * > + * %QCOM_DDR_LEVEL_AUTO: DDR operates with LPM enabled > + * %QCOM_DDR_LEVEL_PERF: DDR operates with LPM disabled > + */ > +#define QCOM_DDR_LEVEL_AUTO 0x0 > +#define QCOM_DDR_LEVEL_PERF 0x1 > + > +#endif /* __DT_BINDINGS_QCOM_SCMI_VENDOR_H */ > -- > 2.34.1 >
On 6/14/24 01:06, Rob Herring wrote: > On Thu, Jun 13, 2024 at 12:00:28AM +0530, Sibi Sankar wrote: >> Document the SCMI QCOM Vendor protocol v1.0 bindings and the various memory >> buses that can be monitored and scaled by memory latency governor hosted >> on it. >> Hey Rob, Thanks for taking time to review the series :) >> Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> >> --- >> >> v1: >> * Add missing bindings for the protocol. [Konrad/Dmitry] >> * Use alternate bindings. [Dmitry/Konrad] >> >> .../bindings/firmware/arm,scmi.yaml | 21 ++ >> .../bindings/soc/qcom/qcom,scmi-memlat.yaml | 243 ++++++++++++++++++ >> include/dt-bindings/soc/qcom,scmi-vendor.h | 22 ++ >> 3 files changed, 286 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml >> create mode 100644 include/dt-bindings/soc/qcom,scmi-vendor.h >> >> diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml >> index 7de2c29606e5..21e4da53d02c 100644 >> --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml >> +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml >> @@ -278,6 +278,27 @@ properties: >> required: >> - reg >> >> + protocol@80: >> + $ref: '#/$defs/protocol-node' >> + unevaluatedProperties: false >> + >> + properties: >> + reg: >> + const: 0x80 >> + >> + memlat-dvfs: > > I don't see the purpose of this container node. Thanks, looks like I took a shortcut to show that the memory nodes are logically placed with this abstraction. I'll should be able to get it removed and achieve the same functionality. > >> + type: object >> + additionalProperties: false >> + description: >> + The list of all memory buses that can be monitored and scaled by the >> + memory latency governor running on the SCMI controller. >> + >> + patternProperties: >> + '^memory-[0-9]$': >> + type: object >> + $ref: /schemas/soc/qcom/qcom,scmi-memlat.yaml# > > This schema needs to be at the level of the protocol node. See the i.MX > SCMI pinctrl patches for more details on what it should look like. Thanks will take a look at that. > >> + unevaluatedProperties: false >> + >> additionalProperties: false >> >> $defs: >> diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml >> new file mode 100644 >> index 000000000000..c6e3d163c4a3 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml >> @@ -0,0 +1,243 @@ >> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) >> +%YAML 1.2 >> +--- >> +$id: http://devicetree.org/schemas/soc/qcom/qcom,scmi-memlat.yaml# >> +$schema: http://devicetree.org/meta-schemas/core.yaml# >> + >> +title: Qualcomm SCMI Memory Bus nodes >> + >> +maintainers: >> + - Sibi Sankar <quic_sibis@quicinc.com> >> + >> +description: | > > Doesn't need '|' if no formatting. ack > >> + This binding describes the various memory buses that can be monitored and scaled >> + by memory latency governor running on the CPU Control Processor (SCMI controller). >> + >> +properties: >> + qcom,memory-type: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + enum: [0, 1, 2] >> + description: > > Needs a '|' if you want your formatting preserved. ack > >> + Memory Bus Identifier >> + 0 = QCOM_MEM_TYPE_DDR >> + 1 = QCOM_MEM_TYPE_LLCC >> + 2 = QCOM_MEM_TYPE_DDR_QOS >> + >> + freq-table-hz: >> + items: >> + items: >> + - description: Minimum frequency of the memory bus in Hz >> + - description: Maximum frequency of the memory bus in Hz >> + >> +patternProperties: >> + '^monitor-[0-9]$': >> + type: object >> + unevaluatedProperties: false >> + description: >> + The list of all monitors detecting the memory latency bound workloads using >> + various counters. >> + >> + properties: >> + qcom,compute-type: >> + description: >> + Monitors of type compute perform bus dvfs based on a rudimentary CPU >> + frequency to memory frequency map. >> + type: boolean >> + >> + qcom,ipm-ceil: >> + $ref: /schemas/types.yaml#/definitions/uint32 >> + description: >> + Monitors having this property perform bus dvfs based on the same >> + rudimentary table but the scaling is performed only if the calculated >> + IPM (Instruction Per Misses) exceeds the given ceiling. >> + >> + qcom,cpulist: >> + $ref: /schemas/types.yaml#/definitions/phandle-array >> + description: >> + List of phandles to the CPUs nodes whose frequency and IPM are to be >> + monitored. > > We have a standard property for this: cpus will use ^^ in the next re-spin > >> + >> + operating-points-v2: true >> + opp-table: >> + type: object >> + >> + required: >> + - qcom,cpulist >> + - operating-points-v2 >> + - opp-table >> + > >> + allOf: >> + - if: >> + properties: >> + qcom,compute-type: false >> + then: >> + required: >> + - qcom,ipm-ceil >> + >> + - if: >> + properties: >> + qcom,ipm-ceil: false >> + then: >> + required: >> + - qcom,compute-type > > Isn't all this just: > > oneOf: > - required: [ qcom,compute-type ] > - required: [ qcom,ipm-ceil ] ack, will use ^^ in the next re-spin. -Sibi > > >> + >> +required: >> + - qcom,memory-type >> + - freq-table-hz >> + >> +additionalProperties: false >> + >> +examples: >> + - | >> + #include <dt-bindings/soc/qcom,scmi-vendor.h> >> + >> + firmware { >> + scmi { >> + compatible = "arm,scmi"; >> + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; >> + mbox-names = "tx", "rx"; >> + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; >> + >> + #address-cells = <1>; >> + #size-cells = <0>; >> + >> + protocol@80 { >> + reg = <0x80>; >> + >> + memlat-dvfs { >> + memory-0 { >> + qcom,memory-type = <QCOM_MEM_TYPE_DDR>; >> + freq-table-hz = /bits/ 64 <200000000 4224000000>; >> + >> + monitor-0 { >> + qcom,ipm-ceil = <20000000>; >> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 >> + &CPU8 &CPU9 &CPU10 &CPU11>; >> + operating-points-v2 = <&memory0_monitor0_opp_table>; >> + >> + memory0_monitor0_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-999000000 { >> + opp-hz = /bits/ 64 <999000000 547000000>; >> + }; >> + >> + opp-1440000000 { >> + opp-hz = /bits/ 64 <1440000000 768000000>; >> + }; >> + >> + opp-1671000000 { >> + opp-hz = /bits/ 64 <1671000000 1555000000>; >> + }; >> + >> + opp-2189000000 { >> + opp-hz = /bits/ 64 <2189000000 2092000000>; >> + }; >> + >> + opp-2516000000 { >> + opp-hz = /bits/ 64 <2516000000 3187000000>; >> + }; >> + >> + opp-3860000000 { >> + opp-hz = /bits/ 64 <3860000000 4224000000>; >> + }; >> + }; >> + }; >> + >> + monitor-1 { >> + qcom,compute-type; >> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 >> + &CPU8 &CPU9 &CPU10 &CPU11>; >> + operating-points-v2 = <&memory0_monitor1_opp_table>; >> + >> + memory0_monitor1_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-1440000000 { >> + opp-hz = /bits/ 64 <1440000000 200000000>; >> + }; >> + >> + opp-2189000000 { >> + opp-hz = /bits/ 64 <2189000000 768000000>; >> + }; >> + >> + opp-2516000000 { >> + opp-hz = /bits/ 64 <2516000000 1555000000>; >> + }; >> + >> + opp-3860000000 { >> + opp-hz = /bits/ 64 <3860000000 4224000000>; >> + }; >> + }; >> + }; >> + }; >> + >> + memory-1 { >> + qcom,memory-type = <QCOM_MEM_TYPE_LLCC>; >> + freq-table-hz = /bits/ 64 <300000000 1067000000>; >> + >> + monitor-0 { >> + qcom,ipm-ceil = <20000000>; >> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 >> + &CPU8 &CPU9 &CPU10 &CPU11>; >> + operating-points-v2 = <&memory1_monitor0_opp_table>; >> + >> + memory1_monitor0_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-999000000 { >> + opp-hz = /bits/ 64 <999000000 300000000>; >> + }; >> + >> + opp-1440000000 { >> + opp-hz = /bits/ 64 <1440000000 466000000>; >> + }; >> + >> + opp-1671000000 { >> + opp-hz = /bits/ 64 <1671000000 600000000>; >> + }; >> + >> + opp-2189000000 { >> + opp-hz = /bits/ 64 <2189000000 806000000>; >> + }; >> + >> + opp-2516000000 { >> + opp-hz = /bits/ 64 <2516000000 933000000>; >> + }; >> + >> + opp-3860000000 { >> + opp-hz = /bits/ 64 <3860000000 1066000000>; >> + }; >> + }; >> + }; >> + }; >> + >> + memory-2 { >> + qcom,memory-type = <QCOM_MEM_TYPE_DDR_QOS>; >> + freq-table-hz = /bits/ 64 <QCOM_DDR_LEVEL_AUTO QCOM_DDR_LEVEL_PERF>; >> + >> + monitor-0 { >> + qcom,ipm-ceil = <20000000>; >> + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 >> + &CPU8 &CPU9 &CPU10 &CPU11>; >> + operating-points-v2 = <&memory2_monitor0_opp_table>; >> + >> + memory2_monitor0_opp_table: opp-table { >> + compatible = "operating-points-v2"; >> + >> + opp-2189000000 { >> + opp-hz = /bits/ 64 <2189000000>; >> + opp-level = <QCOM_DDR_LEVEL_AUTO>; >> + }; >> + >> + opp-3860000000 { >> + opp-hz = /bits/ 64 <3860000000>; >> + opp-level = <QCOM_DDR_LEVEL_PERF>; >> + }; >> + }; >> + }; >> + }; >> + }; >> + }; >> + }; >> + }; >> diff --git a/include/dt-bindings/soc/qcom,scmi-vendor.h b/include/dt-bindings/soc/qcom,scmi-vendor.h >> new file mode 100644 >> index 000000000000..7ae8d8d5623b >> --- /dev/null >> +++ b/include/dt-bindings/soc/qcom,scmi-vendor.h >> @@ -0,0 +1,22 @@ >> +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ >> +/* >> + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. >> + */ >> +#ifndef __DT_BINDINGS_QCOM_SCMI_VENDOR_H >> +#define __DT_BINDINGS_QCOM_SCMI_VENDOR >> + >> +/* Memory IDs */ >> +#define QCOM_MEM_TYPE_DDR 0x0 >> +#define QCOM_MEM_TYPE_LLCC 0x1 >> +#define QCOM_MEM_TYPE_DDR_QOS 0x2 >> + >> +/* >> + * QCOM_MEM_TYPE_DDR_QOS supports the following states. >> + * >> + * %QCOM_DDR_LEVEL_AUTO: DDR operates with LPM enabled >> + * %QCOM_DDR_LEVEL_PERF: DDR operates with LPM disabled >> + */ >> +#define QCOM_DDR_LEVEL_AUTO 0x0 >> +#define QCOM_DDR_LEVEL_PERF 0x1 >> + >> +#endif /* __DT_BINDINGS_QCOM_SCMI_VENDOR_H */ >> -- >> 2.34.1 >>
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 7de2c29606e5..21e4da53d02c 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -278,6 +278,27 @@ properties: required: - reg + protocol@80: + $ref: '#/$defs/protocol-node' + unevaluatedProperties: false + + properties: + reg: + const: 0x80 + + memlat-dvfs: + type: object + additionalProperties: false + description: + The list of all memory buses that can be monitored and scaled by the + memory latency governor running on the SCMI controller. + + patternProperties: + '^memory-[0-9]$': + type: object + $ref: /schemas/soc/qcom/qcom,scmi-memlat.yaml# + unevaluatedProperties: false + additionalProperties: false $defs: diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml new file mode 100644 index 000000000000..c6e3d163c4a3 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml @@ -0,0 +1,243 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,scmi-memlat.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SCMI Memory Bus nodes + +maintainers: + - Sibi Sankar <quic_sibis@quicinc.com> + +description: | + This binding describes the various memory buses that can be monitored and scaled + by memory latency governor running on the CPU Control Processor (SCMI controller). + +properties: + qcom,memory-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + Memory Bus Identifier + 0 = QCOM_MEM_TYPE_DDR + 1 = QCOM_MEM_TYPE_LLCC + 2 = QCOM_MEM_TYPE_DDR_QOS + + freq-table-hz: + items: + items: + - description: Minimum frequency of the memory bus in Hz + - description: Maximum frequency of the memory bus in Hz + +patternProperties: + '^monitor-[0-9]$': + type: object + unevaluatedProperties: false + description: + The list of all monitors detecting the memory latency bound workloads using + various counters. + + properties: + qcom,compute-type: + description: + Monitors of type compute perform bus dvfs based on a rudimentary CPU + frequency to memory frequency map. + type: boolean + + qcom,ipm-ceil: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Monitors having this property perform bus dvfs based on the same + rudimentary table but the scaling is performed only if the calculated + IPM (Instruction Per Misses) exceeds the given ceiling. + + qcom,cpulist: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandles to the CPUs nodes whose frequency and IPM are to be + monitored. + + operating-points-v2: true + opp-table: + type: object + + required: + - qcom,cpulist + - operating-points-v2 + - opp-table + + allOf: + - if: + properties: + qcom,compute-type: false + then: + required: + - qcom,ipm-ceil + + - if: + properties: + qcom,ipm-ceil: false + then: + required: + - qcom,compute-type + +required: + - qcom,memory-type + - freq-table-hz + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/qcom,scmi-vendor.h> + + firmware { + scmi { + compatible = "arm,scmi"; + mboxes = <&cpucp_mbox 0>, <&cpucp_mbox 2>; + mbox-names = "tx", "rx"; + shmem = <&cpu_scp_lpri0>, <&cpu_scp_lpri1>; + + #address-cells = <1>; + #size-cells = <0>; + + protocol@80 { + reg = <0x80>; + + memlat-dvfs { + memory-0 { + qcom,memory-type = <QCOM_MEM_TYPE_DDR>; + freq-table-hz = /bits/ 64 <200000000 4224000000>; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory0_monitor0_opp_table>; + + memory0_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-999000000 { + opp-hz = /bits/ 64 <999000000 547000000>; + }; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 768000000>; + }; + + opp-1671000000 { + opp-hz = /bits/ 64 <1671000000 1555000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 2092000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 3187000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 4224000000>; + }; + }; + }; + + monitor-1 { + qcom,compute-type; + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory0_monitor1_opp_table>; + + memory0_monitor1_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 200000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 768000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 1555000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 4224000000>; + }; + }; + }; + }; + + memory-1 { + qcom,memory-type = <QCOM_MEM_TYPE_LLCC>; + freq-table-hz = /bits/ 64 <300000000 1067000000>; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory1_monitor0_opp_table>; + + memory1_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-999000000 { + opp-hz = /bits/ 64 <999000000 300000000>; + }; + + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000 466000000>; + }; + + opp-1671000000 { + opp-hz = /bits/ 64 <1671000000 600000000>; + }; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000 806000000>; + }; + + opp-2516000000 { + opp-hz = /bits/ 64 <2516000000 933000000>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000 1066000000>; + }; + }; + }; + }; + + memory-2 { + qcom,memory-type = <QCOM_MEM_TYPE_DDR_QOS>; + freq-table-hz = /bits/ 64 <QCOM_DDR_LEVEL_AUTO QCOM_DDR_LEVEL_PERF>; + + monitor-0 { + qcom,ipm-ceil = <20000000>; + qcom,cpulist = <&CPU0 &CPU1 &CPU2 &CPU3 &CPU4 &CPU5 &CPU6 &CPU7 + &CPU8 &CPU9 &CPU10 &CPU11>; + operating-points-v2 = <&memory2_monitor0_opp_table>; + + memory2_monitor0_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-2189000000 { + opp-hz = /bits/ 64 <2189000000>; + opp-level = <QCOM_DDR_LEVEL_AUTO>; + }; + + opp-3860000000 { + opp-hz = /bits/ 64 <3860000000>; + opp-level = <QCOM_DDR_LEVEL_PERF>; + }; + }; + }; + }; + }; + }; + }; + }; diff --git a/include/dt-bindings/soc/qcom,scmi-vendor.h b/include/dt-bindings/soc/qcom,scmi-vendor.h new file mode 100644 index 000000000000..7ae8d8d5623b --- /dev/null +++ b/include/dt-bindings/soc/qcom,scmi-vendor.h @@ -0,0 +1,22 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. + */ +#ifndef __DT_BINDINGS_QCOM_SCMI_VENDOR_H +#define __DT_BINDINGS_QCOM_SCMI_VENDOR + +/* Memory IDs */ +#define QCOM_MEM_TYPE_DDR 0x0 +#define QCOM_MEM_TYPE_LLCC 0x1 +#define QCOM_MEM_TYPE_DDR_QOS 0x2 + +/* + * QCOM_MEM_TYPE_DDR_QOS supports the following states. + * + * %QCOM_DDR_LEVEL_AUTO: DDR operates with LPM enabled + * %QCOM_DDR_LEVEL_PERF: DDR operates with LPM disabled + */ +#define QCOM_DDR_LEVEL_AUTO 0x0 +#define QCOM_DDR_LEVEL_PERF 0x1 + +#endif /* __DT_BINDINGS_QCOM_SCMI_VENDOR_H */
Document the SCMI QCOM Vendor protocol v1.0 bindings and the various memory buses that can be monitored and scaled by memory latency governor hosted on it. Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com> --- v1: * Add missing bindings for the protocol. [Konrad/Dmitry] * Use alternate bindings. [Dmitry/Konrad] .../bindings/firmware/arm,scmi.yaml | 21 ++ .../bindings/soc/qcom/qcom,scmi-memlat.yaml | 243 ++++++++++++++++++ include/dt-bindings/soc/qcom,scmi-vendor.h | 22 ++ 3 files changed, 286 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,scmi-memlat.yaml create mode 100644 include/dt-bindings/soc/qcom,scmi-vendor.h