diff mbox series

[09/22] dt-bindings: thermal: qcom-spmi-adc-tm-hc: reference thermal-sensor schema

Message ID 20240614-dt-bindings-thermal-allof-v1-9-30b25a6ae24e@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series dt-bindings: thermal: few cleanups | expand

Commit Message

Krzysztof Kozlowski June 14, 2024, 9:46 a.m. UTC
Device is a thermal sensor and it requires '#thermal-sensor-cells', so
reference the thermal-sensor.yaml to simplify it and bring the
common definition of '#thermal-sensor-cells' property.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml          | 8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

Comments

Dmitry Baryshkov June 14, 2024, 10:35 a.m. UTC | #1
On Fri, Jun 14, 2024 at 11:46:08AM GMT, Krzysztof Kozlowski wrote:
> Device is a thermal sensor and it requires '#thermal-sensor-cells', so
> reference the thermal-sensor.yaml to simplify it and bring the
> common definition of '#thermal-sensor-cells' property.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml          | 8 +++-----
>  1 file changed, 3 insertions(+), 5 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
index 7541e27704ca..bfad8130a042 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm-hc.yaml
@@ -8,6 +8,8 @@  title: Qualcomm's SPMI PMIC ADC HC Thermal Monitoring
 maintainers:
   - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
 
+$ref: thermal-sensor.yaml#
+
 properties:
   compatible:
     const: qcom,spmi-adc-tm-hc
@@ -20,9 +22,6 @@  properties:
 
   "#thermal-sensor-cells":
     const: 1
-    description:
-      Number of cells required to uniquely identify the thermal sensors. Since
-      we have multiple sensors this is set to 1
 
   "#address-cells":
     const: 1
@@ -106,9 +105,8 @@  required:
   - interrupts
   - "#address-cells"
   - "#size-cells"
-  - "#thermal-sensor-cells"
 
-additionalProperties: false
+unevaluatedProperties: false
 
 examples:
   - |