diff mbox series

[v3,03/41] iio: accel: msa311: make use of regmap_clear_bits()

Message ID 20240617-review-v3-3-88d1338c4cca@baylibre.com (mailing list archive)
State Not Applicable
Headers show
Series iio: simplify with regmap_set_bits(), regmap_clear_bits() | expand

Commit Message

Trevor Gamblin June 17, 2024, 1:49 p.m. UTC 
Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
---
 drivers/iio/accel/msa311.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/iio/accel/msa311.c b/drivers/iio/accel/msa311.c
index b8ddbfd98f11..4cdbf5424a53 100644
--- a/drivers/iio/accel/msa311.c
+++ b/drivers/iio/accel/msa311.c
@@ -1034,10 +1034,10 @@  static int msa311_chip_init(struct msa311_priv *msa311)
 				     "failed to unmap map0/map1 interrupts\n");
 
 	/* Disable all axes by default */
-	err = regmap_update_bits(msa311->regs, MSA311_ODR_REG,
-				 MSA311_GENMASK(F_X_AXIS_DIS) |
-				 MSA311_GENMASK(F_Y_AXIS_DIS) |
-				 MSA311_GENMASK(F_Z_AXIS_DIS), 0);
+	err = regmap_clear_bits(msa311->regs, MSA311_ODR_REG,
+				MSA311_GENMASK(F_X_AXIS_DIS) |
+				MSA311_GENMASK(F_Y_AXIS_DIS) |
+				MSA311_GENMASK(F_Z_AXIS_DIS));
 	if (err)
 		return dev_err_probe(dev, err, "can't enable all axes\n");