diff mbox series

[v3,35/41] iio: pressure: bmp280-core: make use of regmap_clear_bits()

Message ID 20240617-review-v3-35-88d1338c4cca@baylibre.com (mailing list archive)
State Not Applicable
Headers show
Series iio: simplify with regmap_set_bits(), regmap_clear_bits() | expand

Commit Message

Trevor Gamblin June 17, 2024, 1:50 p.m. UTC 
Instead of using regmap_update_bits() and passing val = 0, use
regmap_clear_bits().

Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
---
 drivers/iio/pressure/bmp280-core.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Vasileios Amoiridis June 17, 2024, 11:22 p.m. UTC | #1 
For the bmp280-core.c part, in Patch 35/41:

Tested-By: Vasileios Amoiridis <vassilisamir@gmail.com>
Linus Walleij June 18, 2024, 11:12 a.m. UTC | #2 
On Mon, Jun 17, 2024 at 3:51 PM Trevor Gamblin <tgamblin@baylibre.com> wrote:

> Instead of using regmap_update_bits() and passing val = 0, use
> regmap_clear_bits().
>
> Suggested-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
> Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>

Yours,
Linus Walleij
diff mbox series

Patch

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 09f53d987c7d..ef7f546839e4 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -1566,8 +1566,8 @@  static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
 			goto exit;
 
 		/* Disable programming mode bit */
-		ret = regmap_update_bits(data->regmap, BMP580_REG_NVM_ADDR,
-					 BMP580_NVM_PROG_EN, 0);
+		ret = regmap_clear_bits(data->regmap, BMP580_REG_NVM_ADDR,
+					BMP580_NVM_PROG_EN);
 		if (ret) {
 			dev_err(data->dev, "error resetting nvm write\n");
 			goto exit;