diff mbox series

[v2,5/5] arm64: dts: qcom: sdx75-idp: enable MPSS remoteproc node

Message ID 20240617093428.3616194-6-quic_nainmeht@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add MPSS remoteproc support for SDX75 | expand

Commit Message

Naina Mehta June 17, 2024, 9:34 a.m. UTC 
Enable MPSS remoteproc node on sdx75-idp platform.

Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sdx75-idp.dts | 6 ++++++
 1 file changed, 6 insertions(+)

Comments

Dmitry Baryshkov June 17, 2024, 10:02 a.m. UTC | #1 
On Mon, Jun 17, 2024 at 03:04:28PM GMT, Naina Mehta wrote:
> Enable MPSS remoteproc node on sdx75-idp platform.
> 
> Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sdx75-idp.dts | 6 ++++++
>  1 file changed, 6 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
index fde16308c7e2..f1bbe7ab01ab 100644
--- a/arch/arm64/boot/dts/qcom/sdx75-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
@@ -282,6 +282,12 @@  &qupv3_id_0 {
 	status = "okay";
 };
 
+&remoteproc_mpss {
+	firmware-name = "qcom/sdx75/modem.mbn",
+			"qcom/sdx75/modem_dtb.mbn";
+	status = "okay";
+};
+
 &sdhc {
 	cd-gpios = <&tlmm 103 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_2v95_vdd>;