| Message ID | 20240626104002.420535-2-quic_varada@quicinc.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Enable CPR for IPQ9574 | expand |
On Wed, Jun 26, 2024 at 04:09:54PM GMT, Varadarajan Narayanan wrote: > cpr3 code assumes that 'acc_desc' is available for SoCs > implementing CPR version 4 or less. However, IPQ9574 SoC > implements CPRv4 without ACC. This causes NULL pointer accesses > resulting in crashes. Hence, check is 'acc_desc' is populated > before using it. > > Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> > --- > drivers/pmdomain/qcom/cpr3.c | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c > index c7790a71e74f..c28028be50d8 100644 > --- a/drivers/pmdomain/qcom/cpr3.c > +++ b/drivers/pmdomain/qcom/cpr3.c > @@ -2399,12 +2399,12 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain, > if (ret) > goto exit; > > - if (acc_desc->config) > + if (acc_desc && acc_desc->config) > regmap_multi_reg_write(drv->tcsr, acc_desc->config, > acc_desc->num_regs_per_fuse); > > /* Enable ACC if required */ > - if (acc_desc->enable_mask) > + if (acc_desc && acc_desc->enable_mask) > regmap_update_bits(drv->tcsr, acc_desc->enable_reg, > acc_desc->enable_mask, > acc_desc->enable_mask); > @@ -2676,7 +2676,7 @@ static int cpr_probe(struct platform_device *pdev) > desc = data->cpr_desc; > > /* CPRh disallows MEM-ACC access from the HLOS */ > - if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPRH) > + if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPR4) > return -EINVAL; > > drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); > @@ -2703,7 +2703,7 @@ static int cpr_probe(struct platform_device *pdev) > > mutex_init(&drv->lock); > > - if (desc->cpr_type < CTRL_TYPE_CPRH) { > + if (desc->cpr_type < CTRL_TYPE_CPR4) { This is incorrect. This disables ACC usage for CPR4, while GFX CPR on MSM8998 (which is CPR4) seems to use ACC. > np = of_parse_phandle(dev->of_node, "qcom,acc", 0); > if (!np) > return -ENODEV; > -- > 2.34.1 >
diff --git a/drivers/pmdomain/qcom/cpr3.c b/drivers/pmdomain/qcom/cpr3.c index c7790a71e74f..c28028be50d8 100644 --- a/drivers/pmdomain/qcom/cpr3.c +++ b/drivers/pmdomain/qcom/cpr3.c @@ -2399,12 +2399,12 @@ static int cpr_pd_attach_dev(struct generic_pm_domain *domain, if (ret) goto exit; - if (acc_desc->config) + if (acc_desc && acc_desc->config) regmap_multi_reg_write(drv->tcsr, acc_desc->config, acc_desc->num_regs_per_fuse); /* Enable ACC if required */ - if (acc_desc->enable_mask) + if (acc_desc && acc_desc->enable_mask) regmap_update_bits(drv->tcsr, acc_desc->enable_reg, acc_desc->enable_mask, acc_desc->enable_mask); @@ -2676,7 +2676,7 @@ static int cpr_probe(struct platform_device *pdev) desc = data->cpr_desc; /* CPRh disallows MEM-ACC access from the HLOS */ - if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPRH) + if (!data->acc_desc && desc->cpr_type < CTRL_TYPE_CPR4) return -EINVAL; drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); @@ -2703,7 +2703,7 @@ static int cpr_probe(struct platform_device *pdev) mutex_init(&drv->lock); - if (desc->cpr_type < CTRL_TYPE_CPRH) { + if (desc->cpr_type < CTRL_TYPE_CPR4) { np = of_parse_phandle(dev->of_node, "qcom,acc", 0); if (!np) return -ENODEV;
cpr3 code assumes that 'acc_desc' is available for SoCs implementing CPR version 4 or less. However, IPQ9574 SoC implements CPRv4 without ACC. This causes NULL pointer accesses resulting in crashes. Hence, check is 'acc_desc' is populated before using it. Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com> --- drivers/pmdomain/qcom/cpr3.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)