diff mbox series

[4/6] arm64: dts: qcom: qcs6490-rb3gen2: Enable IMX577 camera sensor

Message ID 20240629-camss_first_post_linux_next-v1-4-bc798edabc3a@quicinc.com (mailing list archive)
State New
Headers show
Series media: qcom: camss: Add sc7280 support | expand

Commit Message

Vikram Sharma June 28, 2024, 6:32 p.m. UTC
Enable IMX577 camera sensor for qcs6490-rb3gen2.

Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 67 ++++++++++++++++++++++++++++
 1 file changed, 67 insertions(+)

Comments

Bryan O'Donoghue June 29, 2024, 11:22 a.m. UTC | #1
On 28/06/2024 19:32, Vikram Sharma wrote:
> Enable IMX577 camera sensor for qcs6490-rb3gen2.
> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
>   arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 67 ++++++++++++++++++++++++++++
>   1 file changed, 67 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index c4cde4328e3d..237231600dca 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts

I believe the rb3gen2 can be sold with and without the camera mezzanine 
[1], so the approach we have taken for a similar situation on rb5 was to 
have a separate mezzanine dts which includes the baseboard and extends it.


arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
arch/arm64/boot/dts/qcom/qrb5165-rb5-vision-mezzanine.dts

Please replicate that model here.

[1] https://www.thundercomm.com/product/qualcomm-rb3-gen-2/#versions

> @@ -513,6 +513,73 @@ vreg_bob_3p296: bob {
>   	};
>   };
>   
> +&camcc {
> +	status = "okay";
> +};
> +
> +&camss {
> +	status = "disabled";

once you move this into its own dts the camera should be enabled by 
default for that .dtb

> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* The port index denotes CSIPHY id i.e. csiphy2 */
> +		port@3 {
> +			reg = <3>;

copy/past splat from the rb5

port@3 means csiphy3

> +			csiphy3_ep: endpoint {
> +				clock-lanes = <7>;
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&imx412_ep>;
> +			};
> +		};
> +	};
> +};
> +
> +&cci0 {
> +	status = "okay";
> +};

You're enabling cci0 here but not the sensor for it - presumably a 
monochrome sensor attached to one of the other CSIPHYs.

Zap cci0 here until you add that other sensor.

> +
> +&cci1 {
> +	status = "okay";
> +};
> +
> +&cci1_i2c1 {
> +	camera@1a {
> +		/*
> +		 * rb3gen2 ships with an imx577. qcom treats imx412
> +		 * and imx577 the same way. Absent better data do the same here.
> +		 */
> +		compatible = "sony,imx412";
> +		reg = <0x1a>;

The commit log says imx577 but the comapt string says imx412.

Choose which one and maintain the namespace. Its an imx577 right ? 
Upstream kernel has the relevant compat string

Commit: 1251663220d9 ("media: i2c: imx412: Add new compatible strings")

You can just cherry-pick that commit to your kernel and then the 
upstream dts and downstream dts will be compatible.


> +
> +		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
> +		pinctrl-names = "default", "suspend";
> +		pinctrl-0 = <&cam2_default>;
> +		pinctrl-1 = <&cam2_suspend>;
> +
> +		clocks = <&camcc CAM_CC_MCLK3_CLK>,
> +				 <&camcc CAM_CC_MCLK2_CLK>;
> +		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>,
> +				 <&camcc CAM_CC_MCLK2_CLK>;

This looks funny - why do you have MCLK2 ?

One final thing, you appear to be missing some power rails here no ?

e.g. rb5

         vdda-phy-supply = <&vreg_l5a_0p88>;
         vdda-pll-supply = <&vreg_l9a_1p2>;

---
bod
Krzysztof Kozlowski July 1, 2024, 9 a.m. UTC | #2
On 28/06/2024 20:32, Vikram Sharma wrote:
> Enable IMX577 camera sensor for qcs6490-rb3gen2.
> 
> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts | 67 ++++++++++++++++++++++++++++
>  1 file changed, 67 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> index c4cde4328e3d..237231600dca 100644
> --- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
> @@ -513,6 +513,73 @@ vreg_bob_3p296: bob {
>  	};
>  };
>  
> +&camcc {
> +	status = "okay";
> +};
> +
> +&camss {
> +	status = "disabled";
> +	ports {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		/* The port index denotes CSIPHY id i.e. csiphy2 */
> +		port@3 {
> +			reg = <3>;
> +			csiphy3_ep: endpoint {
> +				clock-lanes = <7>;
> +				data-lanes = <0 1 2 3>;
> +				remote-endpoint = <&imx412_ep>;
> +			};
> +		};
> +	};
> +};
> +
> +&cci0 {
> +	status = "okay";
> +};
> +
> +&cci1 {
> +	status = "okay";
> +};
> +
> +&cci1_i2c1 {
> +	camera@1a {
> +		/*
> +		 * rb3gen2 ships with an imx577. qcom treats imx412
> +		 * and imx577 the same way. Absent better data do the same here.

NAK, how qcom treats incorrect code, is not an correct argument.

Use correct compatibles and correct bindings.

> +		 */
> +		compatible = "sony,imx412";
> +		reg = <0x1a>;
> +
> +		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
> +		pinctrl-names = "default", "suspend";
> +		pinctrl-0 = <&cam2_default>;
> +		pinctrl-1 = <&cam2_suspend>;
> +
> +		clocks = <&camcc CAM_CC_MCLK3_CLK>,
> +				 <&camcc CAM_CC_MCLK2_CLK>;
> +		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>,
> +				 <&camcc CAM_CC_MCLK2_CLK>;
> +		assigned-clock-rates = <24000000>,
> +							   <24000000>;
> +
> +		dovdd-supply  = <&vreg_l18b_1p8>;
> +		/* avdd-supply = <&vdc_5v>;
> +		 * dvdd-supply = <&vdc_5v>;

What's this?



Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index c4cde4328e3d..237231600dca 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -513,6 +513,73 @@  vreg_bob_3p296: bob {
 	};
 };
 
+&camcc {
+	status = "okay";
+};
+
+&camss {
+	status = "disabled";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* The port index denotes CSIPHY id i.e. csiphy2 */
+		port@3 {
+			reg = <3>;
+			csiphy3_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx412_ep>;
+			};
+		};
+	};
+};
+
+&cci0 {
+	status = "okay";
+};
+
+&cci1 {
+	status = "okay";
+};
+
+&cci1_i2c1 {
+	camera@1a {
+		/*
+		 * rb3gen2 ships with an imx577. qcom treats imx412
+		 * and imx577 the same way. Absent better data do the same here.
+		 */
+		compatible = "sony,imx412";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default", "suspend";
+		pinctrl-0 = <&cam2_default>;
+		pinctrl-1 = <&cam2_suspend>;
+
+		clocks = <&camcc CAM_CC_MCLK3_CLK>,
+				 <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK3_CLK>,
+				 <&camcc CAM_CC_MCLK2_CLK>;
+		assigned-clock-rates = <24000000>,
+							   <24000000>;
+
+		dovdd-supply  = <&vreg_l18b_1p8>;
+		/* avdd-supply = <&vdc_5v>;
+		 * dvdd-supply = <&vdc_5v>;
+		 */
+
+		port {
+			imx412_ep: endpoint {
+				clock-lanes = <7>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy3_ep>;
+			};
+		};
+	};
+};
+
 &gcc {
 	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
 			   <GCC_MSS_CFG_AHB_CLK>,