| Message ID | 20240629-camss_first_post_linux_next-v1-5-bc798edabc3a@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | media: qcom: camss: Add sc7280 support | expand |
On Freitag, 28. Juni 2024 20:32:39 MESZ Vikram Sharma wrote: > This change enables IMX577 sensor driver for qcm6490. > > Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com> > Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> > --- > drivers/i2c/busses/i2c-qcom-cci.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c > index 414882c57d7f..10e6df566ae3 100644 > --- a/drivers/i2c/busses/i2c-qcom-cci.c > +++ b/drivers/i2c/busses/i2c-qcom-cci.c > @@ -817,6 +817,7 @@ static const struct of_device_id cci_dt_match[] = { > * Do not add any new ones unless they introduce a new config > */ > { .compatible = "qcom,msm8916-cci", .data = &cci_v1_data}, > + { .compatible = "qcom,sc7280-cci", .data = &cci_v2_data}, Please read the comment above qcom,msm8916-cci. And sc7280.dtsi already uses compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; So qcom,msm8996-cci with the same match data (cci_v2_data) gets used, so just drop this patch. Regards Luca > { .compatible = "qcom,sdm845-cci", .data = &cci_v2_data}, > { .compatible = "qcom,sm8250-cci", .data = &cci_v2_data}, > { .compatible = "qcom,sm8450-cci", .data = &cci_v2_data}, > >
On 28/06/2024 20:32, Vikram Sharma wrote: > This change enables IMX577 sensor driver for qcm6490. > > Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com> > Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> > --- > drivers/i2c/busses/i2c-qcom-cci.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c > index 414882c57d7f..10e6df566ae3 100644 > --- a/drivers/i2c/busses/i2c-qcom-cci.c > +++ b/drivers/i2c/busses/i2c-qcom-cci.c > @@ -817,6 +817,7 @@ static const struct of_device_id cci_dt_match[] = { > * Do not add any new ones unless they introduce a new config > */ > { .compatible = "qcom,msm8916-cci", .data = &cci_v1_data}, > + { .compatible = "qcom,sc7280-cci", .data = &cci_v2_data}, NAK, ridiculous. Best regards, Krzysztof
On 29/06/2024 10:22, Luca Weiss wrote: > On Freitag, 28. Juni 2024 20:32:39 MESZ Vikram Sharma wrote: >> This change enables IMX577 sensor driver for qcm6490. >> >> Signed-off-by: Hariram Purushothaman <quic_hariramp@quicinc.com> >> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com> >> --- >> drivers/i2c/busses/i2c-qcom-cci.c | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c >> index 414882c57d7f..10e6df566ae3 100644 >> --- a/drivers/i2c/busses/i2c-qcom-cci.c >> +++ b/drivers/i2c/busses/i2c-qcom-cci.c >> @@ -817,6 +817,7 @@ static const struct of_device_id cci_dt_match[] = { >> * Do not add any new ones unless they introduce a new config >> */ >> { .compatible = "qcom,msm8916-cci", .data = &cci_v1_data}, >> + { .compatible = "qcom,sc7280-cci", .data = &cci_v2_data}, > > Please read the comment above qcom,msm8916-cci. > > And sc7280.dtsi already uses > > compatible = "qcom,sc7280-cci", "qcom,msm8996-cci"; > > So qcom,msm8996-cci with the same match data (cci_v2_data) gets used, so > just drop this patch. > I think we put quite obvious comment, yet it is ignored. Any ideas how to change the comment so people will read it? Best regards, Krzysztof
diff --git a/drivers/i2c/busses/i2c-qcom-cci.c b/drivers/i2c/busses/i2c-qcom-cci.c index 414882c57d7f..10e6df566ae3 100644 --- a/drivers/i2c/busses/i2c-qcom-cci.c +++ b/drivers/i2c/busses/i2c-qcom-cci.c @@ -817,6 +817,7 @@ static const struct of_device_id cci_dt_match[] = { * Do not add any new ones unless they introduce a new config */ { .compatible = "qcom,msm8916-cci", .data = &cci_v1_data}, + { .compatible = "qcom,sc7280-cci", .data = &cci_v2_data}, { .compatible = "qcom,sdm845-cci", .data = &cci_v2_data}, { .compatible = "qcom,sm8250-cci", .data = &cci_v2_data}, { .compatible = "qcom,sm8450-cci", .data = &cci_v2_data},