diff mbox series

[v0,2/2] arm64: dts: qcom: ipq5332: Fix interrupt trigger type for usb

Message ID 20240711065615.2720367-2-quic_varada@quicinc.com (mailing list archive)
State Accepted
Commit 60a76f7826b88ebf7697a56fdcd9596b23c2b616
Headers show
Series [v0,1/2] dt-bindings: usb: qcom,dwc3: Add minItems for interrupt info | expand

Commit Message

Varadarajan Narayanan July 11, 2024, 6:56 a.m. UTC
Trigger type is incorrectly specified as IRQ_TYPE_EDGE_BOTH
instead of IRQ_TYPE_LEVEL_HIGH. This trigger type is not
supported for SPIs and results in probe failure with -EINVAL.

Fixes: 927173bf8a0e ("arm64: dts: qcom: Add missing interrupts for qcs404/ipq5332")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 7a39e66d51f1..ff8ad1036ac7 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -322,8 +322,8 @@  usb: usb@8af8800 {
 			reg = <0x08af8800 0x400>;
 
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 53 IRQ_TYPE_EDGE_BOTH>,
-				     <GIC_SPI 52 IRQ_TYPE_EDGE_BOTH>;
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "pwr_event",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";