| Message ID | 20240722-qx1050-feature-expansion-v1-1-c4d486435b96@riseup.net (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | F(x)tec Pro1X feature expansion | expand |
On 22.07.2024 9:10 AM, Dang Huynh wrote: > The Pro1X has a flip keyboard and a single-state camera button. > > Signed-off-by: Dang Huynh <danct12@riseup.net> > --- > arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 33 +++++++++++++++++++++++-- > 1 file changed, 31 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > index 4a30024aa48f..5b7dd54be6b6 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > @@ -34,9 +34,24 @@ framebuffer0: framebuffer@5c000000 { > > gpio-keys { > compatible = "gpio-keys"; > - > - pinctrl-0 = <&vol_up_n>; > pinctrl-names = "default"; > + pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>; Please don't reorder these looks good otherwise Konrad
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 4a30024aa48f..5b7dd54be6b6 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -34,9 +34,24 @@ framebuffer0: framebuffer@5c000000 { gpio-keys { compatible = "gpio-keys"; - - pinctrl-0 = <&vol_up_n>; pinctrl-names = "default"; + pinctrl-0 = <&hall_sensor_n>, <&key_camera_n>, <&vol_up_n>; + + hall-switch { + label = "Hall Switch"; + linux,input-type = <EV_SW>; + linux,code = <SW_KEYPAD_SLIDE>; + gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>; + debounce-interval = <90>; + wakeup-source; + }; + + key-camera { + label = "Camera Button"; + linux,code = <KEY_CAMERA>; + gpios = <&tlmm 18 GPIO_ACTIVE_LOW>; + debounce-interval = <15>; + }; key-volume-up { label = "Volume Up"; @@ -212,6 +227,20 @@ &sleep_clk { &tlmm { gpio-reserved-ranges = <0 4>, <14 4>; + + hall_sensor_n: hall-sensor-n { + pins = "gpio96"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + key_camera_n: key-camera-n { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; }; &ufs_mem_hc {
The Pro1X has a flip keyboard and a single-state camera button. Signed-off-by: Dang Huynh <danct12@riseup.net> --- arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 33 +++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-)