| Message ID | 20240730220401.3649-2-wsa+renesas@sang-engineering.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | i2c: don't use ',' after delimiters | expand |
Hi Wolfram, On Wed, Jul 31, 2024 at 12:01:59AM GMT, Wolfram Sang wrote: > Delimiters are meant to be last, no need for a ',' there. Remove a > superfluous newline in the ali1535 driver while here. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > > @Andi: These changes are super trivial so I put them into one patch. Let > me know if you prefer broken out patches. I think it is better if it > goes through your tree, but I can also take if you prefer. It's OK... I will leave it for a few days more and then merge it. Thanks, Andi
On Wed, 2024-07-31 at 00:01 +0200, Wolfram Sang wrote: > Delimiters are meant to be last, no need for a ',' there. Remove a > superfluous newline in the ali1535 driver while here. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> > --- > > @Andi: These changes are super trivial so I put them into one patch. Let > me know if you prefer broken out patches. I think it is better if it > goes through your tree, but I can also take if you prefer. > > drivers/i2c/busses/i2c-ali1535.c | 3 +-- > drivers/i2c/busses/i2c-amd-mp2-plat.c | 2 +- > drivers/i2c/busses/i2c-aspeed.c | 2 +- Thanks for the cleanup. For the Aspeed portion: Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Hi Wolfram, On Wed, Jul 31, 2024 at 12:01:59AM GMT, Wolfram Sang wrote: > Delimiters are meant to be last, no need for a ',' there. Remove a > superfluous newline in the ali1535 driver while here. > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> pushed into i2c/i2c-host. Thanks, Andi
On Wed, 31 Jul 2024 00:01:59 +0200, Wolfram Sang wrote: > Delimiters are meant to be last, no need for a ',' there. Remove a > superfluous newline in the ali1535 driver while here. Thanks for the cleanup. Reviewed-by: Jean Delvare <jdelvare@suse.de>
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 9d7b4efe26ad..544c94e86b89 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -479,9 +479,8 @@ static struct i2c_adapter ali1535_adapter = { static const struct pci_device_id ali1535_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, - { }, + { } }; - MODULE_DEVICE_TABLE(pci, ali1535_ids); static int ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id) diff --git a/drivers/i2c/busses/i2c-amd-mp2-plat.c b/drivers/i2c/busses/i2c-amd-mp2-plat.c index d3ac1c77a509..6f0ef587e76d 100644 --- a/drivers/i2c/busses/i2c-amd-mp2-plat.c +++ b/drivers/i2c/busses/i2c-amd-mp2-plat.c @@ -340,7 +340,7 @@ static void i2c_amd_remove(struct platform_device *pdev) static const struct acpi_device_id i2c_amd_acpi_match[] = { { "AMDI0011" }, - { }, + { } }; MODULE_DEVICE_TABLE(acpi, i2c_amd_acpi_match); diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c index ce8c4846b7fa..f411576a024c 100644 --- a/drivers/i2c/busses/i2c-aspeed.c +++ b/drivers/i2c/busses/i2c-aspeed.c @@ -991,7 +991,7 @@ static const struct of_device_id aspeed_i2c_bus_of_table[] = { .compatible = "aspeed,ast2600-i2c-bus", .data = aspeed_i2c_25xx_get_clk_reg_val, }, - { }, + { } }; MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table); diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c index 3e6b80e59b90..3dc5a46698fc 100644 --- a/drivers/i2c/busses/i2c-digicolor.c +++ b/drivers/i2c/busses/i2c-digicolor.c @@ -357,7 +357,7 @@ static void dc_i2c_remove(struct platform_device *pdev) static const struct of_device_id dc_i2c_match[] = { { .compatible = "cnxt,cx92755-i2c" }, - { }, + { } }; MODULE_DEVICE_TABLE(of, dc_i2c_match); diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c index 0197786892a2..976d43f73f38 100644 --- a/drivers/i2c/busses/i2c-imx-lpi2c.c +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c @@ -559,7 +559,7 @@ static const struct i2c_algorithm lpi2c_imx_algo = { static const struct of_device_id lpi2c_imx_of_match[] = { { .compatible = "fsl,imx7ulp-lpi2c" }, - { }, + { } }; MODULE_DEVICE_TABLE(of, lpi2c_imx_of_match); diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 35a3f0a64986..1d9ad25c89ae 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1261,7 +1261,7 @@ static const struct of_device_id omap_i2c_of_match[] = { .compatible = "ti,omap2420-i2c", .data = &omap2420_pdata, }, - { }, + { } }; MODULE_DEVICE_TABLE(of, omap_i2c_of_match); #endif diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index 4e32d57ae0bf..febbd9950d8f 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -146,7 +146,7 @@ static const struct dmi_system_id piix4_dmi_ibm[] = { .ident = "IBM", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, }, - { }, + { } }; /* diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index f448505d5468..1dafadda73af 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -721,7 +721,7 @@ static void i2c_pnx_remove(struct platform_device *pdev) #ifdef CONFIG_OF static const struct of_device_id i2c_pnx_of_match[] = { { .compatible = "nxp,pnx-i2c" }, - { }, + { } }; MODULE_DEVICE_TABLE(of, i2c_pnx_of_match); #endif diff --git a/drivers/i2c/busses/i2c-pxa-pci.c b/drivers/i2c/busses/i2c-pxa-pci.c index 6b3c6a733368..af2094720a4d 100644 --- a/drivers/i2c/busses/i2c-pxa-pci.c +++ b/drivers/i2c/busses/i2c-pxa-pci.c @@ -135,7 +135,7 @@ static int ce4100_i2c_probe(struct pci_dev *dev, static const struct pci_device_id ce4100_i2c_devices[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2e68)}, - { }, + { } }; static struct pci_driver ce4100_i2c_driver = { diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index 031175113dd4..4d76e71cdd4b 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -218,7 +218,7 @@ static const struct platform_device_id i2c_pxa_id_table[] = { { "ce4100-i2c", REGS_CE4100 }, { "pxa910-i2c", REGS_PXA910 }, { "armada-3700-i2c", REGS_A3700 }, - { }, + { } }; MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table); diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c index 0a8b95ce35f7..e435dcbac688 100644 --- a/drivers/i2c/busses/i2c-qcom-geni.c +++ b/drivers/i2c/busses/i2c-qcom-geni.c @@ -721,7 +721,7 @@ static const struct i2c_algorithm geni_i2c_algo = { static const struct acpi_device_id geni_i2c_acpi_match[] = { { "QCOM0220"}, { "QCOM0411" }, - { }, + { } }; MODULE_DEVICE_TABLE(acpi, geni_i2c_acpi_match); #endif diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 4a2c745751a2..d480162a4d39 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -1648,7 +1648,7 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup) static const struct acpi_device_id qup_i2c_acpi_match[] = { { "QCOM8010"}, - { }, + { } }; MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match); diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 01419c738cfc..7698d9d59744 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -130,7 +130,7 @@ static const struct platform_device_id s3c24xx_driver_ids[] = { }, { .name = "s3c2440-hdmiphy-i2c", .driver_data = QUIRK_S3C2440 | QUIRK_HDMIPHY | QUIRK_NO_GPIO, - }, { }, + }, { } }; MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids); diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c index b63f75e44296..6cf57e32119c 100644 --- a/drivers/i2c/i2c-core-base.c +++ b/drivers/i2c/i2c-core-base.c @@ -1068,7 +1068,7 @@ EXPORT_SYMBOL(i2c_find_device_by_fwnode); static const struct i2c_device_id dummy_id[] = { { "dummy", }, { "smbus_host_notify", }, - { }, + { } }; static int dummy_probe(struct i2c_client *client)
Delimiters are meant to be last, no need for a ',' there. Remove a superfluous newline in the ali1535 driver while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> --- @Andi: These changes are super trivial so I put them into one patch. Let me know if you prefer broken out patches. I think it is better if it goes through your tree, but I can also take if you prefer. drivers/i2c/busses/i2c-ali1535.c | 3 +-- drivers/i2c/busses/i2c-amd-mp2-plat.c | 2 +- drivers/i2c/busses/i2c-aspeed.c | 2 +- drivers/i2c/busses/i2c-digicolor.c | 2 +- drivers/i2c/busses/i2c-imx-lpi2c.c | 2 +- drivers/i2c/busses/i2c-omap.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 2 +- drivers/i2c/busses/i2c-pnx.c | 2 +- drivers/i2c/busses/i2c-pxa-pci.c | 2 +- drivers/i2c/busses/i2c-pxa.c | 2 +- drivers/i2c/busses/i2c-qcom-geni.c | 2 +- drivers/i2c/busses/i2c-qup.c | 2 +- drivers/i2c/busses/i2c-s3c2410.c | 2 +- drivers/i2c/i2c-core-base.c | 2 +- 14 files changed, 14 insertions(+), 15 deletions(-)