Message ID | 20240731-dwc_pmu_fix-v1-1-ca47d153e5b2@quicinc.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | perf/dwc_pcie: Fix registration issue in multi PCIe controller instances | expand |
On 2024/7/31 12:23, Krishna chaitanya chundru wrote: > When there are multiple of instances of PCIe controllers, registration > to perf driver fails with this error. > sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0' > CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty > Hardware name: Qualcomm SA8775P Ride (DT) > Call trace: > dump_backtrace.part.8+0x98/0xf0 > show_stack+0x14/0x1c > dump_stack_lvl+0x74/0x88 > dump_stack+0x14/0x1c > sysfs_warn_dup+0x60/0x78 > sysfs_create_dir_ns+0xe8/0x100 > kobject_add_internal+0x94/0x224 > kobject_add+0xa8/0x118 > device_add+0x298/0x7b4 > platform_device_add+0x1a0/0x228 > platform_device_register_full+0x11c/0x148 > dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu] > dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu] > do_one_initcall+0x58/0x1c0 > do_init_module+0x58/0x208 > load_module+0x1804/0x188c > __do_sys_init_module+0x18c/0x1f0 > __arm64_sys_init_module+0x14/0x1c > invoke_syscall+0x40/0xf8 > el0_svc_common.constprop.1+0x70/0xf4 > do_el0_svc+0x18/0x20 > el0_svc+0x28/0xb0 > el0t_64_sync_handler+0x9c/0xc0 > el0t_64_sync+0x160/0x164 > kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST, > don't try to register things with the same name in the same directory. > > This is because of having same bdf value for devices under two different > controllers. > > Update the logic to use sbdf which is a unique number in case of > multi instance also. > > Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver") Did you run into this on a QCOM platform with Patch 4/4 since there's multiple PCIe domains? > Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> > --- > drivers/perf/dwc_pcie_pmu.c | 16 ++++++++-------- > 1 file changed, 8 insertions(+), 8 deletions(-) > > diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c > index c5e328f23841..c115348b8d53 100644 > --- a/drivers/perf/dwc_pcie_pmu.c > +++ b/drivers/perf/dwc_pcie_pmu.c > @@ -556,10 +556,10 @@ static int dwc_pcie_register_dev(struct pci_dev *pdev) > { > struct platform_device *plat_dev; > struct dwc_pcie_dev_info *dev_info; > - u32 bdf; > + u32 sbdf; > > - bdf = PCI_DEVID(pdev->bus->number, pdev->devfn); > - plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf, > + sbdf = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn); > + plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", sbdf, > pdev, sizeof(*pdev)); > > if (IS_ERR(plat_dev)) > @@ -611,15 +611,15 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) > struct pci_dev *pdev = plat_dev->dev.platform_data; > struct dwc_pcie_pmu *pcie_pmu; > char *name; > - u32 bdf, val; > + u32 sbdf, val; > u16 vsec; > int ret; > > vsec = pci_find_vsec_capability(pdev, pdev->vendor, > DWC_PCIE_VSEC_RAS_DES_ID); > pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val); > - bdf = PCI_DEVID(pdev->bus->number, pdev->devfn); > - name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf); > + sbdf = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn); sbdf is also registerd as the id of the platform device in platform_device_register_data() above, can we use it directly here without encoding it again? Thanks. > + name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", sbdf); > if (!name) > return -ENOMEM; > > @@ -650,7 +650,7 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) > ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state, > &pcie_pmu->cpuhp_node); > if (ret) { > - pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf); > + pci_err(pdev, "Error %d registering hotplug @%x\n", ret, sbdf); > return ret; > } > > @@ -663,7 +663,7 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) > > ret = perf_pmu_register(&pcie_pmu->pmu, name, -1); > if (ret) { > - pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf); > + pci_err(pdev, "Error %d registering PMU @%x\n", ret, sbdf); > return ret; > } > ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu, >
On 8/15/2024 7:10 PM, Yicong Yang wrote: > On 2024/7/31 12:23, Krishna chaitanya chundru wrote: >> When there are multiple of instances of PCIe controllers, registration >> to perf driver fails with this error. >> sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0' >> CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty >> Hardware name: Qualcomm SA8775P Ride (DT) >> Call trace: >> dump_backtrace.part.8+0x98/0xf0 >> show_stack+0x14/0x1c >> dump_stack_lvl+0x74/0x88 >> dump_stack+0x14/0x1c >> sysfs_warn_dup+0x60/0x78 >> sysfs_create_dir_ns+0xe8/0x100 >> kobject_add_internal+0x94/0x224 >> kobject_add+0xa8/0x118 >> device_add+0x298/0x7b4 >> platform_device_add+0x1a0/0x228 >> platform_device_register_full+0x11c/0x148 >> dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu] >> dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu] >> do_one_initcall+0x58/0x1c0 >> do_init_module+0x58/0x208 >> load_module+0x1804/0x188c >> __do_sys_init_module+0x18c/0x1f0 >> __arm64_sys_init_module+0x14/0x1c >> invoke_syscall+0x40/0xf8 >> el0_svc_common.constprop.1+0x70/0xf4 >> do_el0_svc+0x18/0x20 >> el0_svc+0x28/0xb0 >> el0t_64_sync_handler+0x9c/0xc0 >> el0t_64_sync+0x160/0x164 >> kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST, >> don't try to register things with the same name in the same directory. >> >> This is because of having same bdf value for devices under two different >> controllers. >> >> Update the logic to use sbdf which is a unique number in case of >> multi instance also. >> >> Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver") > > Did you run into this on a QCOM platform with Patch 4/4 since there's > multiple PCIe domains? > Yes we ran this in QCOM platform where it has multiple PCIe instances. >> Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> >> --- >> drivers/perf/dwc_pcie_pmu.c | 16 ++++++++-------- >> 1 file changed, 8 insertions(+), 8 deletions(-) >> >> diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c >> index c5e328f23841..c115348b8d53 100644 >> --- a/drivers/perf/dwc_pcie_pmu.c >> +++ b/drivers/perf/dwc_pcie_pmu.c >> @@ -556,10 +556,10 @@ static int dwc_pcie_register_dev(struct pci_dev *pdev) >> { >> struct platform_device *plat_dev; >> struct dwc_pcie_dev_info *dev_info; >> - u32 bdf; >> + u32 sbdf; >> >> - bdf = PCI_DEVID(pdev->bus->number, pdev->devfn); >> - plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf, >> + sbdf = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn); >> + plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", sbdf, >> pdev, sizeof(*pdev)); >> >> if (IS_ERR(plat_dev)) >> @@ -611,15 +611,15 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) >> struct pci_dev *pdev = plat_dev->dev.platform_data; >> struct dwc_pcie_pmu *pcie_pmu; >> char *name; >> - u32 bdf, val; >> + u32 sbdf, val; >> u16 vsec; >> int ret; >> >> vsec = pci_find_vsec_capability(pdev, pdev->vendor, >> DWC_PCIE_VSEC_RAS_DES_ID); >> pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val); >> - bdf = PCI_DEVID(pdev->bus->number, pdev->devfn); >> - name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf); >> + sbdf = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn); > > sbdf is also registerd as the id of the platform device in platform_device_register_data() above, > can we use it directly here without encoding it again? > > Thanks. > ack. - Krishna chaitanya. >> + name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", sbdf); >> if (!name) >> return -ENOMEM; >> >> @@ -650,7 +650,7 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) >> ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state, >> &pcie_pmu->cpuhp_node); >> if (ret) { >> - pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf); >> + pci_err(pdev, "Error %d registering hotplug @%x\n", ret, sbdf); >> return ret; >> } >> >> @@ -663,7 +663,7 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) >> >> ret = perf_pmu_register(&pcie_pmu->pmu, name, -1); >> if (ret) { >> - pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf); >> + pci_err(pdev, "Error %d registering PMU @%x\n", ret, sbdf); >> return ret; >> } >> ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu, >>
diff --git a/drivers/perf/dwc_pcie_pmu.c b/drivers/perf/dwc_pcie_pmu.c index c5e328f23841..c115348b8d53 100644 --- a/drivers/perf/dwc_pcie_pmu.c +++ b/drivers/perf/dwc_pcie_pmu.c @@ -556,10 +556,10 @@ static int dwc_pcie_register_dev(struct pci_dev *pdev) { struct platform_device *plat_dev; struct dwc_pcie_dev_info *dev_info; - u32 bdf; + u32 sbdf; - bdf = PCI_DEVID(pdev->bus->number, pdev->devfn); - plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", bdf, + sbdf = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn); + plat_dev = platform_device_register_data(NULL, "dwc_pcie_pmu", sbdf, pdev, sizeof(*pdev)); if (IS_ERR(plat_dev)) @@ -611,15 +611,15 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) struct pci_dev *pdev = plat_dev->dev.platform_data; struct dwc_pcie_pmu *pcie_pmu; char *name; - u32 bdf, val; + u32 sbdf, val; u16 vsec; int ret; vsec = pci_find_vsec_capability(pdev, pdev->vendor, DWC_PCIE_VSEC_RAS_DES_ID); pci_read_config_dword(pdev, vsec + PCI_VNDR_HEADER, &val); - bdf = PCI_DEVID(pdev->bus->number, pdev->devfn); - name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", bdf); + sbdf = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn); + name = devm_kasprintf(&plat_dev->dev, GFP_KERNEL, "dwc_rootport_%x", sbdf); if (!name) return -ENOMEM; @@ -650,7 +650,7 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) ret = cpuhp_state_add_instance(dwc_pcie_pmu_hp_state, &pcie_pmu->cpuhp_node); if (ret) { - pci_err(pdev, "Error %d registering hotplug @%x\n", ret, bdf); + pci_err(pdev, "Error %d registering hotplug @%x\n", ret, sbdf); return ret; } @@ -663,7 +663,7 @@ static int dwc_pcie_pmu_probe(struct platform_device *plat_dev) ret = perf_pmu_register(&pcie_pmu->pmu, name, -1); if (ret) { - pci_err(pdev, "Error %d registering PMU @%x\n", ret, bdf); + pci_err(pdev, "Error %d registering PMU @%x\n", ret, sbdf); return ret; } ret = devm_add_action_or_reset(&plat_dev->dev, dwc_pcie_unregister_pmu,
When there are multiple of instances of PCIe controllers, registration to perf driver fails with this error. sysfs: cannot create duplicate filename '/devices/platform/dwc_pcie_pmu.0' CPU: 0 PID: 166 Comm: modprobe Not tainted 6.10.0-rc2-next-20240607-dirty Hardware name: Qualcomm SA8775P Ride (DT) Call trace: dump_backtrace.part.8+0x98/0xf0 show_stack+0x14/0x1c dump_stack_lvl+0x74/0x88 dump_stack+0x14/0x1c sysfs_warn_dup+0x60/0x78 sysfs_create_dir_ns+0xe8/0x100 kobject_add_internal+0x94/0x224 kobject_add+0xa8/0x118 device_add+0x298/0x7b4 platform_device_add+0x1a0/0x228 platform_device_register_full+0x11c/0x148 dwc_pcie_register_dev+0x74/0xf0 [dwc_pcie_pmu] dwc_pcie_pmu_init+0x7c/0x1000 [dwc_pcie_pmu] do_one_initcall+0x58/0x1c0 do_init_module+0x58/0x208 load_module+0x1804/0x188c __do_sys_init_module+0x18c/0x1f0 __arm64_sys_init_module+0x14/0x1c invoke_syscall+0x40/0xf8 el0_svc_common.constprop.1+0x70/0xf4 do_el0_svc+0x18/0x20 el0_svc+0x28/0xb0 el0t_64_sync_handler+0x9c/0xc0 el0t_64_sync+0x160/0x164 kobject: kobject_add_internal failed for dwc_pcie_pmu.0 with -EEXIST, don't try to register things with the same name in the same directory. This is because of having same bdf value for devices under two different controllers. Update the logic to use sbdf which is a unique number in case of multi instance also. Fixes: af9597adc2f1 ("drivers/perf: add DesignWare PCIe PMU driver") Signed-off-by: Krishna chaitanya chundru <quic_krichai@quicinc.com> --- drivers/perf/dwc_pcie_pmu.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)