diff mbox series

[v3,09/13] arm64: dts: qcom: sa8775p: Add 'linux,pci-domain' to PCIe EP controller nodes

Message ID 20240731-pci-qcom-hotplug-v3-9-a1426afdee3b@linaro.org (mailing list archive)
State Superseded
Headers show
Series PCI: qcom: Enumerate endpoints based on Link up event in 'global_irq' interrupt | expand

Commit Message

Manivannan Sadhasivam via B4 Relay July 31, 2024, 10:50 a.m. UTC 
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

'linux,pci-domain' property provides the PCI domain number for the PCI
endpoint controllers in a SoC. If this property is not present, then an
unstable (across boots) unique number will be assigned.

Use this property to specify the domain number based on the actual hardware
instance of the PCI endpoint controllers in SA8775P SoC.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index 23f1b2e5e624..198b39abde97 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -4618,6 +4618,7 @@  pcie0_ep: pcie-ep@1c00000 {
 		phy-names = "pciephy";
 		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
 		num-lanes = <2>;
+		linux,pci-domain = <0>;
 
 		status = "disabled";
 	};
@@ -4775,6 +4776,7 @@  pcie1_ep: pcie-ep@1c10000 {
 		phy-names = "pciephy";
 		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
 		num-lanes = <4>;
+		linux,pci-domain = <1>;
 
 		status = "disabled";
 	};