diff mbox series

[03/11] drm/msm/dsi: correct programming sequence for SM8350 / SM8450

Message ID 20240804-sm8350-fixes-v1-3-1149dd8399fe@linaro.org (mailing list archive)
State Not Applicable
Headers show
Series arm64: qcom: set of fixes for SM8350 platform | expand

Commit Message

Dmitry Baryshkov Aug. 4, 2024, 5:40 a.m. UTC
According to the display-drivers, 5nm DSI PLL (v4.2, v4.3) have
different boundaries for pll_clock_inverters programming. Follow the
vendor code and use correct values.

Fixes: 2f9ae4e395ed ("drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 12 +++++++++++-
 1 file changed, 11 insertions(+), 1 deletion(-)

Comments

Abhinav Kumar Aug. 28, 2024, 8:33 p.m. UTC | #1
On 8/3/2024 10:40 PM, Dmitry Baryshkov wrote:
> According to the display-drivers, 5nm DSI PLL (v4.2, v4.3) have
> different boundaries for pll_clock_inverters programming. Follow the
> vendor code and use correct values.
> 
> Fixes: 2f9ae4e395ed ("drm/msm/dsi: add support for DSI-PHY on SM8350 and SM8450")
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c | 12 +++++++++++-
>   1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> index 3b59137ca674..031446c87dae 100644
> --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
> @@ -135,7 +135,7 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
>   			config->pll_clock_inverters = 0x00;
>   		else
>   			config->pll_clock_inverters = 0x40;
> -	} else {
> +	} else if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
>   		if (pll_freq <= 1000000000ULL)
>   			config->pll_clock_inverters = 0xa0;
>   		else if (pll_freq <= 2500000000ULL)
> @@ -144,6 +144,16 @@ static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
>   			config->pll_clock_inverters = 0x00;
>   		else
>   			config->pll_clock_inverters = 0x40;
> +	} else {
> +		/* 4.2, 4.3 */
> +		if (pll_freq <= 1000000000ULL)
> +			config->pll_clock_inverters = 0xa0;
> +		else if (pll_freq <= 2500000000ULL)
> +			config->pll_clock_inverters = 0x20;
> +		else if (pll_freq <= 3500000000ULL)
> +			config->pll_clock_inverters = 0x00;
> +		else
> +			config->pll_clock_inverters = 0x40;
>   	}


Sorry for the delay, my request for the docs was first rejected for some 
reason :)

Now I finally got access and this matches the docs

Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
index 3b59137ca674..031446c87dae 100644
--- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
+++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c
@@ -135,7 +135,7 @@  static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
 			config->pll_clock_inverters = 0x00;
 		else
 			config->pll_clock_inverters = 0x40;
-	} else {
+	} else if (pll->phy->cfg->quirks & DSI_PHY_7NM_QUIRK_V4_1) {
 		if (pll_freq <= 1000000000ULL)
 			config->pll_clock_inverters = 0xa0;
 		else if (pll_freq <= 2500000000ULL)
@@ -144,6 +144,16 @@  static void dsi_pll_calc_dec_frac(struct dsi_pll_7nm *pll, struct dsi_pll_config
 			config->pll_clock_inverters = 0x00;
 		else
 			config->pll_clock_inverters = 0x40;
+	} else {
+		/* 4.2, 4.3 */
+		if (pll_freq <= 1000000000ULL)
+			config->pll_clock_inverters = 0xa0;
+		else if (pll_freq <= 2500000000ULL)
+			config->pll_clock_inverters = 0x20;
+		else if (pll_freq <= 3500000000ULL)
+			config->pll_clock_inverters = 0x00;
+		else
+			config->pll_clock_inverters = 0x40;
 	}
 
 	config->decimal_div_start = dec;