| Message ID | 20240822054457.16314-1-quic_sachgupt@quicinc.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [V2] arm64: dts: qcom: Add SD Card node for qcm6490-idp | expand |
On Thu, Aug 22, 2024 at 11:14:57AM GMT, Sachin Gupta wrote: > Add SD Card node for Qualcomm qcm6490-idp Board. > > Signed-off-by: Sachin Gupta <quic_sachgupt@quicinc.com> It doesn't look like this patch was tested, see below... > --- > arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 27 ++++++++++++++++++++++++ > 1 file changed, 27 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > index a0668f767e4b..8cfbb42af6a3 100644 > --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts > @@ -641,6 +641,21 @@ > status = "okay"; > }; > > +&sdc2_clk { > + bias-disable; > + drive-strength = <16>; > +}; > + > +&sdc2_cmd { > + bias-pull-up; > + drive-strength = <10>; > +}; > + > +&sdc2_data { > + bias-pull-up; > + drive-strength = <10>; > +}; > + > &sdhc_1 { > non-removable; > no-sd; > @@ -652,6 +667,18 @@ > status = "okay"; > }; > > +&sdhc_2 { > + status = "okay"; > + > + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; > + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; Please point me to the sd_cd definition that is going to be used here? > + > + vmmc-supply = <&vreg_l9c_2p96>; > + vqmmc-supply = <&vreg_l6c_2p96>; > + > + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; > +}; > + > &tlmm { > gpio-reserved-ranges = <32 2>, /* ADSP */ > <48 4>; /* NFC */ > -- > 2.17.1 >
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts index a0668f767e4b..8cfbb42af6a3 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts @@ -641,6 +641,21 @@ status = "okay"; }; +&sdc2_clk { + bias-disable; + drive-strength = <16>; +}; + +&sdc2_cmd { + bias-pull-up; + drive-strength = <10>; +}; + +&sdc2_data { + bias-pull-up; + drive-strength = <10>; +}; + &sdhc_1 { non-removable; no-sd; @@ -652,6 +667,18 @@ status = "okay"; }; +&sdhc_2 { + status = "okay"; + + pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>; + pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>; + + vmmc-supply = <&vreg_l9c_2p96>; + vqmmc-supply = <&vreg_l6c_2p96>; + + cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>; +}; + &tlmm { gpio-reserved-ranges = <32 2>, /* ADSP */ <48 4>; /* NFC */
Add SD Card node for Qualcomm qcm6490-idp Board. Signed-off-by: Sachin Gupta <quic_sachgupt@quicinc.com> --- arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 27 ++++++++++++++++++++++++ 1 file changed, 27 insertions(+)