diff mbox series

[19/22] dt-bindings: i2c: document support for SA8255p

Message ID 20240828203721.2751904-20-quic_nkela@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series arm64: qcom: Introduce SA8255p Ride platform | expand

Commit Message

Nikunj Kela Aug. 28, 2024, 8:37 p.m. UTC
Add compatible representing i2c support on SA8255p.

Clocks and interconnects are being configured in Firmware VM
on SA8255p, therefore making them optional.

CC: Praveen Talari <quic_ptalari@quicinc.com>
Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
---
 .../bindings/i2c/qcom,i2c-geni-qcom.yaml      | 56 ++++++++++++-------
 1 file changed, 36 insertions(+), 20 deletions(-)

Comments

Krzysztof Kozlowski Aug. 29, 2024, 7:44 a.m. UTC | #1
On Wed, Aug 28, 2024 at 01:37:18PM -0700, Nikunj Kela wrote:
> Add compatible representing i2c support on SA8255p.
> 
> Clocks and interconnects are being configured in Firmware VM
> on SA8255p, therefore making them optional.
> 
> CC: Praveen Talari <quic_ptalari@quicinc.com>
> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com>
> ---
>  .../bindings/i2c/qcom,i2c-geni-qcom.yaml      | 56 ++++++++++++-------
>  1 file changed, 36 insertions(+), 20 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> index 9f66a3bb1f80..88f513fc5b08 100644
> --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> @@ -15,14 +15,13 @@ properties:
>      enum:
>        - qcom,geni-i2c
>        - qcom,geni-i2c-master-hub
> +      - qcom,sa8255p-geni-i2c

Same as in other patches, this does not make sense. What is the point of
generic compatibles?


>  
>    clocks:
> -    minItems: 1
> -    maxItems: 2

Nope.

> +    description: phandles for the clock providers

Useless description. This cannot be anything else than phandles for the
clock providers.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 9f66a3bb1f80..88f513fc5b08 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -15,14 +15,13 @@  properties:
     enum:
       - qcom,geni-i2c
       - qcom,geni-i2c-master-hub
+      - qcom,sa8255p-geni-i2c
 
   clocks:
-    minItems: 1
-    maxItems: 2
+    description: phandles for the clock providers
 
   clock-names:
-    minItems: 1
-    maxItems: 2
+    description: names for the clocks
 
   clock-frequency:
     default: 100000
@@ -36,12 +35,13 @@  properties:
       - const: rx
 
   interconnects:
-    minItems: 2
-    maxItems: 3
+    description: phandles of interconnect bw provider
 
   interconnect-names:
-    minItems: 2
-    maxItems: 3
+    items:
+      - const: qup-core
+      - const: qup-config
+      - const: qup-memory
 
   interrupts:
     maxItems: 1
@@ -69,8 +69,6 @@  properties:
 required:
   - compatible
   - interrupts
-  - clocks
-  - clock-names
   - reg
 
 allOf:
@@ -100,22 +98,28 @@  allOf:
           items:
             - const: qup-core
             - const: qup-config
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,sa8255p-geni-i2c
+    then:
+      required:
+        - power-domains
     else:
       properties:
         clocks:
-          maxItems: 1
-
+          minItems: 1
+          maxItems: 2
         clock-names:
-          const: se
-
+          minItems: 1
+          maxItems: 2
         interconnects:
-          minItems: 3
-
+          minItems: 2
+          maxItems: 3
         interconnect-names:
-          items:
-            - const: qup-core
-            - const: qup-config
-            - const: qup-memory
+          minItems: 2
+          maxItems: 3
 
 unevaluatedProperties: false
 
@@ -143,4 +147,16 @@  examples:
         power-domains = <&rpmhpd SC7180_CX>;
         required-opps = <&rpmhpd_opp_low_svs>;
     };
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c@a90000 {
+        compatible = "qcom,sa8255p-geni-i2c";
+        reg = <0xa90000 0x4000>;
+        interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+        power-domains = <&scmi9_pd 11>;
+    };
 ...