diff mbox series

[17/21] drm/msm/dpu: Adjust writeback phys encoder setup for CWB

Message ID 20240829-concurrent-wb-v1-17-502b16ae2ebb@quicinc.com (mailing list archive)
State Not Applicable
Headers show
Series drm/msm/dpu: Add Concurrent Writeback Support for DPU 10.x+ | expand

Commit Message

Jessica Zhang Aug. 29, 2024, 8:48 p.m. UTC 
Adjust QoS remapper, OT limit, and CDP parameters to account for
concurrent writeback

Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

Comments

Dmitry Baryshkov Aug. 30, 2024, 5:30 p.m. UTC | #1 
On Thu, Aug 29, 2024 at 01:48:38PM GMT, Jessica Zhang wrote:
> Adjust QoS remapper, OT limit, and CDP parameters to account for
> concurrent writeback
> 
> Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
> ---
>  drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
index 6d93e6ae442d..56b5e44132da 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_wb.c
@@ -68,7 +68,7 @@  static void dpu_encoder_phys_wb_set_ot_limit(
 	ot_params.num = hw_wb->idx - WB_0;
 	ot_params.width = phys_enc->cached_mode.hdisplay;
 	ot_params.height = phys_enc->cached_mode.vdisplay;
-	ot_params.is_wfd = true;
+	ot_params.is_wfd = !dpu_encoder_in_clone_mode(phys_enc->parent);
 	ot_params.frame_rate = drm_mode_vrefresh(&phys_enc->cached_mode);
 	ot_params.vbif_idx = hw_wb->caps->vbif_idx;
 	ot_params.rd = false;
@@ -111,7 +111,7 @@  static void dpu_encoder_phys_wb_set_qos_remap(
 	qos_params.vbif_idx = hw_wb->caps->vbif_idx;
 	qos_params.xin_id = hw_wb->caps->xin_id;
 	qos_params.num = hw_wb->idx - WB_0;
-	qos_params.is_rt = false;
+	qos_params.is_rt = dpu_encoder_in_clone_mode(phys_enc->parent);
 
 	DPU_DEBUG("[qos_remap] wb:%d vbif:%d xin:%d is_rt:%d\n",
 			qos_params.num,
@@ -174,6 +174,7 @@  static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc,
 	struct dpu_encoder_phys_wb *wb_enc = to_dpu_encoder_phys_wb(phys_enc);
 	struct dpu_hw_wb *hw_wb;
 	struct dpu_hw_wb_cfg *wb_cfg;
+	u32 cdp_usage;
 
 	if (!phys_enc || !phys_enc->dpu_kms || !phys_enc->dpu_kms->catalog) {
 		DPU_ERROR("invalid encoder\n");
@@ -182,6 +183,10 @@  static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc,
 
 	hw_wb = phys_enc->hw_wb;
 	wb_cfg = &wb_enc->wb_cfg;
+	if (dpu_encoder_in_clone_mode(phys_enc->parent))
+		cdp_usage = DPU_PERF_CDP_USAGE_RT;
+	else
+		cdp_usage = DPU_PERF_CDP_USAGE_NRT;
 
 	wb_cfg->intf_mode = phys_enc->intf_mode;
 	wb_cfg->roi.x1 = 0;
@@ -199,7 +204,7 @@  static void dpu_encoder_phys_wb_setup_fb(struct dpu_encoder_phys *phys_enc,
 		const struct dpu_perf_cfg *perf = phys_enc->dpu_kms->catalog->perf;
 
 		hw_wb->ops.setup_cdp(hw_wb, wb_cfg->dest.format,
-				     perf->cdp_cfg[DPU_PERF_CDP_USAGE_NRT].wr_enable);
+				     perf->cdp_cfg[cdp_usage].wr_enable);
 	}
 
 	if (hw_wb->ops.setup_outaddress)