@@ -99,7 +99,15 @@ port@1 {
reg = <1>;
pmic_glink_ss0_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ remote-endpoint = <&retimer_ss0_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss0_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss0_con_sbu_out>;
};
};
};
@@ -128,7 +136,15 @@ port@1 {
reg = <1>;
pmic_glink_ss1_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ remote-endpoint = <&retimer_ss1_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss1_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss1_con_sbu_out>;
};
};
};
@@ -157,7 +173,15 @@ port@1 {
reg = <1>;
pmic_glink_ss2_ss_in: endpoint {
- remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+ remote-endpoint = <&retimer_ss2_ss_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ pmic_glink_ss2_con_sbu_in: endpoint {
+ remote-endpoint = <&retimer_ss2_con_sbu_out>;
};
};
};
@@ -288,6 +312,134 @@ vreg_edp_3p3: regulator-edp-3p3 {
regulator-boot-on;
};
+ vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&rtmr0_1p15_reg_en>;
+ pinctrl-names = "default";
+ };
+
+ vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&rtmr0_1p8_reg_en>;
+ pinctrl-names = "default";
+ };
+
+ vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR0_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-0 = <&rtmr0_3p3_reg_en>;
+ pinctrl-names = "default";
+ };
+
+ vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtmr1_1p15_reg_en>;
+ };
+
+ vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtmr1_1p8_reg_en>;
+ };
+
+ vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR1_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtmr1_3p3_reg_en>;
+ };
+
+ vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_1P15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+
+ gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtmr2_1p15_reg_en>;
+ };
+
+ vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_1P8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtmr2_1p8_reg_en>;
+ };
+
+ vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "VREG_RTMR2_3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtmr2_3p3_reg_en>;
+ };
+
+
+
vreg_nvme: regulator-nvme {
compatible = "regulator-fixed";
@@ -709,6 +861,163 @@ keyboard@3a {
};
};
+&i2c1 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK5>;
+ clock-names = "xo";
+
+ vdd15-supply = <&vreg_rtmr2_1p15>;
+ vdd18-supply = <&vreg_rtmr2_1p8>;
+ vdd33-supply = <&vreg_rtmr2_3p3>;
+
+ reset-gpios = <&tlmm 185 GPIO_ACTIVE_HIGH>;
+
+ orientation-switch;
+ retimer-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss2_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss2_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss2_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss2_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c3 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x08>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK3>;
+ clock-names = "xo";
+
+ vdd15-supply = <&vreg_rtmr0_1p15>;
+ vdd18-supply = <&vreg_rtmr0_1p8>;
+ vdd33-supply = <&vreg_rtmr0_3p3>;
+
+ reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_HIGH>;
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss0_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss0_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss0_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+ };
+ };
+ };
+ };
+};
+
+&i2c7 {
+ clock-frequency = <400000>;
+
+ status = "okay";
+
+ typec-mux@8 {
+ compatible = "parade,ps8830";
+ reg = <0x8>;
+
+ clocks = <&rpmhcc RPMH_RF_CLK4>;
+ clock-names = "xo";
+
+ vdd15-supply = <&vreg_rtmr1_1p15>;
+ vdd18-supply = <&vreg_rtmr1_1p8>;
+ vdd33-supply = <&vreg_rtmr1_3p3>;
+
+ reset-gpios = <&tlmm 176 GPIO_ACTIVE_HIGH>;
+
+ retimer-switch;
+ orientation-switch;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ retimer_ss1_ss_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ retimer_ss1_ss_in: endpoint {
+ remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ retimer_ss1_con_sbu_out: endpoint {
+ remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+ };
+ };
+
+ };
+ };
+};
+
&i2c8 {
clock-frequency = <400000>;
@@ -756,6 +1065,30 @@ &mdss {
status = "okay";
};
+&mdss_dp0 {
+ status = "okay";
+};
+
+&mdss_dp0_out {
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dp1 {
+ status = "okay";
+};
+
+&mdss_dp1_out {
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dp2 {
+ status = "okay";
+};
+
+&mdss_dp2_out {
+ data-lanes = <0 1 2 3>;
+};
+
&mdss_dp3 {
compatible = "qcom,x1e80100-dp";
/delete-property/ #sound-dai-cells;
@@ -854,6 +1187,33 @@ &pcie6a_phy {
status = "okay";
};
+&pm8550_gpios {
+ rtmr0_3p3_reg_en: rtmr0-3p3-reg-en-state {
+ pins = "gpio11";
+ function = "func1";
+ input-disable;
+ output-enable;
+ };
+};
+
+&pm8550ve_8_gpios {
+ rtmr0_1p15_reg_en: rtmr0-1p15-reg-en-state {
+ pins = "gpio8";
+ function = "func1";
+ input-disable;
+ output-enable;
+ };
+};
+
+&pm8550ve_9_gpios {
+ rtmr0_1p8_reg_en: rtmr0-1p8-reg-en-state {
+ pins = "gpio8";
+ function = "func1";
+ input-disable;
+ output-enable;
+ };
+};
+
&pmc8380_3_gpios {
edp_bl_en: edp-bl-en-state {
pins = "gpio4";
@@ -1093,6 +1453,48 @@ wake-n-pins {
};
};
+ rtmr1_1p15_reg_en: rtmr1-1p15-reg-en-state {
+ pins = "gpio188";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr1_1p8_reg_en: rtmr1-1p8-reg-en-state {
+ pins = "gpio175";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr1_3p3_reg_en: rtmr1-3p3-reg-en-state {
+ pins = "gpio186";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr2_1p15_reg_en: rtmr2-1p15-reg-en-state {
+ pins = "gpio189";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr2_1p8_reg_en: rtmr2-1p8-reg-en-state {
+ pins = "gpio126";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rtmr2_3p3_reg_en: rtmr2-3p3-reg-en-state {
+ pins = "gpio187";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
tpad_default: tpad-default-state {
pins = "gpio3";
function = "gpio";
@@ -1164,7 +1566,7 @@ &usb_1_ss0_dwc3_hs {
};
&usb_1_ss0_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss0_ss_in>;
+ remote-endpoint = <&retimer_ss0_ss_in>;
};
&usb_1_ss1_hsphy {
@@ -1196,7 +1598,7 @@ &usb_1_ss1_dwc3_hs {
};
&usb_1_ss1_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss1_ss_in>;
+ remote-endpoint = <&retimer_ss1_ss_in>;
};
&usb_1_ss2_hsphy {
@@ -1228,5 +1630,5 @@ &usb_1_ss2_dwc3_hs {
};
&usb_1_ss2_qmpphy_out {
- remote-endpoint = <&pmic_glink_ss2_ss_in>;
+ remote-endpoint = <&retimer_ss2_ss_in>;
};
The Qualcomm Snapdragon X Elite CRD board has 3 USB Type-C ports, all of them supporting external DP altmode. Between each QMP combo PHY and the corresponding Type-C port, sits one Parade PS8830 retimer which handles both orientation and SBU muxing. Add nodes for each retimer, fix the graphs between connectors and the PHYs accordingly, add the voltage regulators needed by each retimer and then enable all 3 remaining DPUs. Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 414 +++++++++++++++++++++++++++++- 1 file changed, 408 insertions(+), 6 deletions(-)