| Message ID | 20240904095815.1572186-2-caleb.connolly@linaro.org (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | ath11k: allow missing memory-regions | expand |
On 9/4/2024 3:27 PM, Caleb Connolly wrote: > On SC7280 platforms which are running with TrustZone, it is not > necessary to manually map the memory regions used by the wifi hardware. > However, ath11k will currently fail to load unless both memory regions > are specified. > > This breaks wifi on the rb3gen2 which only specifies the firmware memory > region and does not use the CE region. > > Adjust the order of operations in ath11k_ahb_fw_resources_init() to > check for the wifi-firmware subnode before attempting to parse the > memory regions. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > --- > Cc: linux-arm-msm@vger.kernel.org > --- > drivers/net/wireless/ath/ath11k/ahb.c | 12 ++++++------ > 1 file changed, 6 insertions(+), 6 deletions(-) > > diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c > index 634d385fd9ad..e24f8da565db 100644 > --- a/drivers/net/wireless/ath/ath11k/ahb.c > +++ b/drivers/net/wireless/ath/ath11k/ahb.c > @@ -999,20 +999,20 @@ static int ath11k_ahb_fw_resources_init(struct ath11k_base *ab) > */ > if (!ab->hw_params.fixed_fw_mem) > return 0; > > - ret = ath11k_ahb_setup_msa_resources(ab); > - if (ret) { > - ath11k_err(ab, "failed to setup msa resources\n"); > - return ret; > - } > - > node = of_get_child_by_name(host_dev->of_node, "wifi-firmware"); > if (!node) { > ab_ahb->fw.use_tz = true; > return 0; > } > > + ret = ath11k_ahb_setup_msa_resources(ab); > + if (ret) { > + ath11k_err(ab, "failed to setup msa resources\n"); > + return ret; > + } > + > info.fwnode = &node->fwnode; > info.parent = host_dev; > info.name = node->name; > info.dma_mask = DMA_BIT_MASK(32); ath11k_ahb_setup_msa_resources(ab), will only read the device-tree and save the memory addresses/size form device-tree to ab_ahb->fw. These saved address, only used if "wifi-firmware" node is defined. This the node "wifi-firmware" is not defined it is considered to be running with TrustZone, and saved addresses are not of use. This changes looks fine.
On Fri, Sep 06, 2024 at 12:47:31PM GMT, Raj Kumar Bhagat wrote: > On 9/4/2024 3:27 PM, Caleb Connolly wrote: > > On SC7280 platforms which are running with TrustZone, it is not > > necessary to manually map the memory regions used by the wifi hardware. > > However, ath11k will currently fail to load unless both memory regions > > are specified. > > > > This breaks wifi on the rb3gen2 which only specifies the firmware memory > > region and does not use the CE region. > > > > Adjust the order of operations in ath11k_ahb_fw_resources_init() to > > check for the wifi-firmware subnode before attempting to parse the > > memory regions. > > > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > > --- > > Cc: linux-arm-msm@vger.kernel.org > > --- > > drivers/net/wireless/ath/ath11k/ahb.c | 12 ++++++------ > > 1 file changed, 6 insertions(+), 6 deletions(-) > > > > diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c > > index 634d385fd9ad..e24f8da565db 100644 > > --- a/drivers/net/wireless/ath/ath11k/ahb.c > > +++ b/drivers/net/wireless/ath/ath11k/ahb.c > > @@ -999,20 +999,20 @@ static int ath11k_ahb_fw_resources_init(struct ath11k_base *ab) > > */ > > if (!ab->hw_params.fixed_fw_mem) > > return 0; > > > > - ret = ath11k_ahb_setup_msa_resources(ab); > > - if (ret) { > > - ath11k_err(ab, "failed to setup msa resources\n"); > > - return ret; > > - } > > - > > node = of_get_child_by_name(host_dev->of_node, "wifi-firmware"); > > if (!node) { > > ab_ahb->fw.use_tz = true; > > return 0; > > } > > > > + ret = ath11k_ahb_setup_msa_resources(ab); > > + if (ret) { > > + ath11k_err(ab, "failed to setup msa resources\n"); > > + return ret; > > + } > > + > > info.fwnode = &node->fwnode; > > info.parent = host_dev; > > info.name = node->name; > > info.dma_mask = DMA_BIT_MASK(32); > > > ath11k_ahb_setup_msa_resources(ab), will only read the device-tree and > save the memory addresses/size form device-tree to ab_ahb->fw. > These saved address, only used if "wifi-firmware" node is defined. > This the node "wifi-firmware" is not defined it is considered to be > running with TrustZone, and saved addresses are not of use. > > This changes looks fine. If this is a 'Reviewed-by' then please state so in your message by adding corresponding line with the tag name, your name and email. Maintainers and patch management systems will pick it up to reflect your contribution to the upstream process.
On 9/4/2024 2:57 AM, Caleb Connolly wrote: > On SC7280 platforms which are running with TrustZone, it is not > necessary to manually map the memory regions used by the wifi hardware. > However, ath11k will currently fail to load unless both memory regions > are specified. > > This breaks wifi on the rb3gen2 which only specifies the firmware memory > region and does not use the CE region. > > Adjust the order of operations in ath11k_ahb_fw_resources_init() to > check for the wifi-firmware subnode before attempting to parse the > memory regions. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
On 9/4/2024 3:27 PM, Caleb Connolly wrote: > On SC7280 platforms which are running with TrustZone, it is not > necessary to manually map the memory regions used by the wifi hardware. > However, ath11k will currently fail to load unless both memory regions > are specified. > > This breaks wifi on the rb3gen2 which only specifies the firmware memory > region and does not use the CE region. > > Adjust the order of operations in ath11k_ahb_fw_resources_init() to > check for the wifi-firmware subnode before attempting to parse the > memory regions. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> Reviewed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com>
Caleb Connolly <caleb.connolly@linaro.org> wrote: > On SC7280 platforms which are running with TrustZone, it is not > necessary to manually map the memory regions used by the wifi hardware. > However, ath11k will currently fail to load unless both memory regions > are specified. > > This breaks wifi on the rb3gen2 which only specifies the firmware memory > region and does not use the CE region. > > Adjust the order of operations in ath11k_ahb_fw_resources_init() to > check for the wifi-firmware subnode before attempting to parse the > memory regions. > > Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> > Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com> > Reviewed-by: Raj Kumar Bhagat <quic_rajkbhag@quicinc.com> > Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Patch applied to ath-next branch of ath.git, thanks. 095cb947490c wifi: ath11k: allow missing memory-regions
diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c index 634d385fd9ad..e24f8da565db 100644 --- a/drivers/net/wireless/ath/ath11k/ahb.c +++ b/drivers/net/wireless/ath/ath11k/ahb.c @@ -999,20 +999,20 @@ static int ath11k_ahb_fw_resources_init(struct ath11k_base *ab) */ if (!ab->hw_params.fixed_fw_mem) return 0; - ret = ath11k_ahb_setup_msa_resources(ab); - if (ret) { - ath11k_err(ab, "failed to setup msa resources\n"); - return ret; - } - node = of_get_child_by_name(host_dev->of_node, "wifi-firmware"); if (!node) { ab_ahb->fw.use_tz = true; return 0; } + ret = ath11k_ahb_setup_msa_resources(ab); + if (ret) { + ath11k_err(ab, "failed to setup msa resources\n"); + return ret; + } + info.fwnode = &node->fwnode; info.parent = host_dev; info.name = node->name; info.dma_mask = DMA_BIT_MASK(32);
On SC7280 platforms which are running with TrustZone, it is not necessary to manually map the memory regions used by the wifi hardware. However, ath11k will currently fail to load unless both memory regions are specified. This breaks wifi on the rb3gen2 which only specifies the firmware memory region and does not use the CE region. Adjust the order of operations in ath11k_ahb_fw_resources_init() to check for the wifi-firmware subnode before attempting to parse the memory regions. Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org> --- Cc: linux-arm-msm@vger.kernel.org --- drivers/net/wireless/ath/ath11k/ahb.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)