diff mbox series

[v3,7/7] arm64: defconfig: enable clock controller, interconnect and pinctrl for QCS615

Message ID 20240926-add_initial_support_for_qcs615-v3-7-e37617e91c62@quicinc.com (mailing list archive)
State Superseded
Headers show
Series Add initial support for QCS615 SoC and QCS615 RIDE board | expand

Commit Message

Lijuan Gao Sept. 26, 2024, 6:54 a.m. UTC 
Enable clock controller, interconnect and pinctrl for Qualcomm
QCS615 platform to boot to UART console.

The serial engine depends on gcc, interconnect and pinctrl. Since
the serial console driver is only available as built-in, so these
configs needs be built-in for the UART device to probe and register
the console.

Signed-off-by: Lijuan Gao <quic_lijuang@quicinc.com>
---
 arch/arm64/configs/defconfig | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 5fdbfea7a5b2..c066fe3a32c3 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -607,6 +607,7 @@  CONFIG_PINCTRL_MSM8996=y
 CONFIG_PINCTRL_MSM8998=y
 CONFIG_PINCTRL_QCM2290=y
 CONFIG_PINCTRL_QCS404=y
+CONFIG_PINCTRL_QCS615=y
 CONFIG_PINCTRL_QDF2XXX=y
 CONFIG_PINCTRL_QDU1000=y
 CONFIG_PINCTRL_SA8775P=y
@@ -1323,6 +1324,7 @@  CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
 CONFIG_QCS_GCC_404=y
+CONFIG_QCS_GCC_615=y
 CONFIG_QDU_GCC_1000=y
 CONFIG_SC_CAMCC_8280XP=m
 CONFIG_SC_DISPCC_7280=m
@@ -1625,6 +1627,7 @@  CONFIG_INTERCONNECT_QCOM_MSM8996=y
 CONFIG_INTERCONNECT_QCOM_OSM_L3=m
 CONFIG_INTERCONNECT_QCOM_QCM2290=y
 CONFIG_INTERCONNECT_QCOM_QCS404=m
+CONFIG_INTERCONNECT_QCOM_QCS615=y
 CONFIG_INTERCONNECT_QCOM_QDU1000=y
 CONFIG_INTERCONNECT_QCOM_SA8775P=y
 CONFIG_INTERCONNECT_QCOM_SC7180=y